Middle of its segment, weak in heat
The Q-SUN Solar Qrystal N8 series is designed to maximize energy yield in situations where every square meter of roof or land matters. The modules utilize N-type cells and TOPCon technology, ensuring stable performance in varying weather conditions and improved resistance to typical degradation over time. This translates to more predictable energy production and a more cost-effective installation over a longer period.
A key feature of the series is the bifacial design in certain variants - allowing for the recovery of additional energy from reflected light, which is particularly effective on bright roof surfaces, membranes, and ground-mounted installations. The Qrystal N8 is a good choice for residential, commercial, and industrial installations where you need high power density and reliable performance in cold, hot, and partially shaded conditions. Compared to the competition, the series offers a significant advantage due to its combination of long power warranty and technology that realistically limits performance degradation over time.
Ranking
Signals from the data
Residential and commercial.
Hot climates, tight roof space and roofs where every square metre has to count.
Bottom 5% of the N-type 450-500 W segment, against a median of -0.290. Ranked 6,093rd in the whole database.
Bottom 7% of the N-type 450-500 W segment, against a median of 22.52%. Ranked 7,421st in the whole database.
Bottom 7% of the N-type 450-500 W segment, against a median of 225.2. Ranked 7,418th in the whole database.
N-type TOPCon technology delivers lower LID/LeTID degradation and a better temperature coefficient than older PERC cells, resulting in more stable energy output on hot days and less power loss during the early years of operation.
The dual-glass bifacial construction captures additional albedo energy from the rear side of the module - depending on the mounting surface (light-colored roof, membrane, ground mount), this can boost total yield by a meaningful margin compared to an equivalent monofacial module.
The manufacturer offers a uniform, linear 30-year power warranty (min=max), matching the best offers on the market and exceeding the standard 25-year power warranties offered by most Tier-1 competitors.
Efficiency reaching 22.5% clearly outperforms thin-film modules such as First Solar Series 6 Plus (~19% at the same max power of 480 W), meaning less roof or ground area is needed to reach the same installed capacity.
10 power variants spanning 430-480 Wp provide flexibility to match modules to specific projects - from residential to commercial installations - without switching product series.
Q-SUN Solar does not appear on the BNEF Tier 1 bankable module manufacturer list, which may complicate bank financing for larger commercial projects where lenders often require Tier-1 modules.
Peak efficiency of 22.5% is about 1.5 pp lower than the competing Gamko New Energy GKA96N-PRO series (24.02% at the same max power of 480 W), placing Qrystal N8 mid-pack rather than at the top of the N-type segment.
The lower bound of the product warranty is just 15 years (depending on variant), 10 years short of the 25-year standard offered by many Tier-1 competitors - buyers should verify which specific variant carries the shorter coverage.
Q-SUN Solar was founded in 2014, and the Qrystal N8 series itself launched in 2023 - a relatively short market history compared to established Tier-1 manufacturers means less long-term field reliability data is available.
- Efficiency of 21.7% is 0.8pp below the N-type 450-500W median (22.5%)
- 217.0 W/m² power density is 8.2 W/m² below N-type 450-500W median (225.2 W/m²) - requires larger installation area
- Temperature coefficient of -0.30%/°C matches the N-type 450-500W median
- At 26.5 kg, this panel is 2.8 kg heavier than the N-type 450-500W median (23.7 kg) - more demanding for installation crews
- 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces
Specifications
Datasheet charts
Measured curves published by Q-SUN Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 470 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Alternatives
Found 751 panels of the same or similar size to this one, within ±10 mm. See them here Found 755 panels of the same or similar size to this one, within ±25 mm. See them here Found 1049 panels of the same or similar size to this one, within ±50 mm. See them here Found 1503 panels of the same or similar size to this one, within ±100 mm. See them here