Skip to main content

Philadelphia Solar PS-M108(HCBF)-410W

410 Wp PERC Bifacial 65%
ComparePV verdict

Light for its output, no clear weak spot

Rank 10,194 of 14,129
Compare panels Datasheet PDF
Power (Wp)
410
Typical for its class
Efficiency (%)
21.00
Strong · top 23%
Density (Wp/m²)
210.3
Strong · top 18%
Temp (%/°C)
-0.350
Typical · median -0.350
Weight (kg)
20.5
Strong · 1.5 kg below median
Warranty (yrs)
25
Typical · median 25 yrs

The Dark PHENex Bifacial series is built for installers and investors looking for panels that combine sleek aesthetics with real energy performance. The modules use half-cut cell technology along with a dense busbar grid, reducing shading losses and improving resistance to microcracks. The distinctive, fully black frame and cell backing let the panel blend seamlessly with any roof type without sacrificing output - a solid fit for customers who care as much about the look of their installation as its efficiency. The defining feature of the series is dual-sided bifacial technology, which captures reflected light on the rear side of the module, boosting overall energy yield without increasing the footprint. The panels are PID-resistant, ensuring stable performance throughout their service life. The design works well on both pitched roofs and ground-mounted installations, supporting on-grid and off-grid systems, including commercial projects. The series comes with a 25-year product and performance warranty, making it a safe long-term choice for installers seeking a proven, aesthetic, and high-performing photovoltaic solution.

Ranking

954 panels in the segment PERC 400-450 W
Metric This panel Median Position in segment Overall rank
Module efficiency 21.00% 20.60% Strong · top 23% 9,828
Power density 210.3 206.2 Strong · top 18% 9,721
Temperature coefficient -0.350 -0.350 Typical 10,489
Weight per kWp 50.0 53.0 Strong · top 17% 3,329
Performance warranty 25 yrs 25 yrs Typical 9,912
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

8 positive · 2 caution
Best for

Residential and commercial.

Strengths
50.0 kg per kWp

Top 17% of the PERC 400-450 W segment, against a median of 53.0.

210.3 watts per square metre

Top 18% of the PERC 400-450 W segment, against a median of 206.2.

21.00% module efficiency

Top 23% of the PERC 400-450 W segment, against a median of 20.60%.

What owners get
Half-cut cell design reduces losses

Half-cut cells combined with a dense busbar grid reduce power loss under partial shading and improve resistance to microcracks compared to conventional full-size cells, resulting in more stable real-world energy yield.

Bifacial technology boosts energy yield

The module captures reflected irradiance from the rear side with a bifaciality ratio of approximately 65±5% (manufacturer data), increasing total energy output without enlarging the installation footprint - particularly beneficial over bright ground surfaces (gravel, white roofing).

Full-black aesthetics without performance loss

The fully black frame and cell backsheet preserve high power output (up to 410 Wp) and efficiency up to 21% while delivering a premium look, distinguishing this series from cheaper full-black panels that sacrifice several percentage points of efficiency for aesthetics.

25-year warranty from a Tier-1 manufacturer

Philadelphia Solar, founded in 2007 and recognized as Tier-1 bankable, offers a 25-year product and performance warranty (min. 86% power retention after 25 years) - matching the warranty terms of comparable series VDS-S144/FNH and Sunket SKT410~430M10-108D4, providing comparable investment security.

PID resistance and broad application range

PID degradation resistance ensures stable operation throughout the module's lifetime, and the design suits both sloped roof and ground-mount installations, in on-grid, off-grid, and commercial-scale projects.

Trade-offs
PERC cells instead of N-type TOPCon

The series relies on the older PERC cell technology, while the comparable Luxor Solar Eco Line N-type TOPCon Bifacial series reaches a higher efficiency of 21.33% at the same maximum power of 410 Wp. N-type cells also typically show lower LID/LeTID degradation than PERC.

Moderate bifaciality ratio

The bifaciality ratio is 65±5% per manufacturer data, a moderate figure compared to premium glass-glass bifacial modules reaching 70-85%, limiting the additional energy yield captured from ground-reflected irradiance.

Notes from the database
  • At 21.0% efficiency, this panel is on par with typical PERC 400-450W modules
  • 210.3 W/m² power density - 4.1 W/m² more than PERC 400-450W median (206.2 W/m²), more power per roof area
  • Temperature coefficient of -0.35%/°C matches the PERC 400-450W median
  • Weight of 20.5 kg (1.5 kg below PERC 400-450W median of 22.0 kg) allows easier transport and roof mounting
  • Bifacial design (65% factor) captures reflected light - adds 3-10% yield on ground-mount or white roof

Specifications

Open datasheet PDF
Nominal power (Pmax) 410 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 21.00 % Strong Segment median 20.60%
Vmpp · Impp 31.52 V · 13.01 A Operating point at max power
Voc · Isc 37.55 V · 13.66 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 1721×1133×30 mm · 1.95 m² of roof
Weight 20.5 kg Strong Strong · 1.5 kg below median
Cells 108 · PERC Monocrystalline
Bifaciality 65 % Rear output as a share of front
Coefficient Pmax -0.350 %/°C Typical median -0.350 of its segment
Coefficient Voc · Isc -0.220 · 0.050 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 25 years Hardware defects only
Performance warranty 25 years Typical median 25 yrs · median 25 yrs
End-of-warranty output 86.0 % Equals 342 W guaranteed
Degradation 2.00 → 0.50 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Philadelphia Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 410 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.350 %/°C against a segment median of -0.350
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Philadelphia Solar PS-M108(HCBF)-410W 410 W 21.00% -0.350 20.5 kg You are here
AIKO-A460-MAH54Mb 460 W 23.60% -0.290 20.5 kg +50 W, cooler, +2.6 pp
JST-EDMH-(445-465)W-TD (460W class) 460 W 23.56% -0.300 20.5 kg +50 W, +2.6 pp, +5 yr warranty
LX-460M/182R-96+ GG 460 W 23.55% -0.260 23.5 kg +50 W, cooler, +2.6 pp
PS-MNB108(HCBF)-460W 460 W 23.53% -0.290 20.5 kg +50 W, cooler, +2.5 pp
JAT54S40-460/LR 460 W 23.50% -0.260 19.3 kg +50 W, cooler, +2.5 pp
LX-460M/182R188-108+ GG 460 W 23.35% -0.290 24.5 kg +50 W, cooler, +2.4 pp
AIKO-455-MAH54Db 455 W 23.30% -0.260 24.0 kg Cooler, +2.3 pp, +5 yr warranty
LR5-54HTH-455M 455 W 23.30% -0.290 20.8 kg +45 W, cooler, +2.3 pp
PS-M108(HC)-400W 400 W 20.50% -0.300 20.5 kg -10 W, cooler, -0.5 pp
PS-M108(HC)-405W 405 W 20.80% -0.300 20.5 kg Cooler
PS-MNB108(HCBF)-425W 425 W 21.80% -0.290 20.5 kg Cooler, +0.8 pp, +5 yr warranty
PS-MNB108(HCBF)-430W 430 W 22.05% -0.290 20.5 kg Cooler, +1.1 pp, +5 yr warranty
PS-MNB108(HCBF)-435W 435 W 22.31% -0.290 20.5 kg Cooler, +1.3 pp, +5 yr warranty
PS-MNB108(HCBF)-440W 440 W 22.57% -0.290 20.5 kg Cooler, +1.6 pp, +5 yr warranty
LR7-54HJD-510M 510 W 25.00% -0.240 23.5 kg +100 W, cooler, +4.0 pp
AIKO-A495-MCE54Mw 495 W 24.80% -0.260 21.0 kg +85 W, cooler, +3.8 pp

Found 1797 panels of the same or similar size to this one, within ±10 mm. See them here Found 1928 panels of the same or similar size to this one, within ±25 mm. See them here Found 3413 panels of the same or similar size to this one, within ±50 mm. See them here Found 4015 panels of the same or similar size to this one, within ±100 mm. See them here

About the DARk PHENex Bifacial series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

How does bifacial technology in Philadelphia Solar Dark PHENex panels differ from standard monofacial modules?
Dark PHENex Bifacial panels capture sunlight on both sides of the module - directly on the front and via reflected light on the rear, bouncing off the roof, ground, or a light-colored surface beneath the array. This allows a higher annual energy yield from the same roof area compared to a classic monofacial panel, without increasing the number of modules in the installation.
What warranty comes with Philadelphia Solar Dark PHENex Bifacial panels?
The Dark PHENex Bifacial series comes with a 25-year product warranty and a 25-year performance warranty. This means the manufacturer covers not only factory defects but also guarantees a defined power output level throughout the panel's 25-year service life, which is standard among leading tier 1 manufacturers.
Are Dark PHENex panels suitable for a pitched roof, or only ground-mount installations?
The Dark PHENex Bifacial design works well on both pitched roofs and ground-mount systems. The all-black frame and cell background blend harmoniously with residential roofs, while the half-cut cell structure improves shading tolerance around chimneys or dormers. The panel also supports on-grid, off-grid, and commercial installations.
What is PERC cell technology in Philadelphia Solar panels and how does it affect power output?
PERC (Passivated Emitter and Rear Cell) adds a passivation layer to the back of the cell that reflects unused photons back into the cell, boosting conversion efficiency. Combined with bifacial and half-cut technology, this allows the Dark PHENex panel to reach a maximum power output of up to 410 Wp while maintaining strong long-term stability.
Are Dark PHENex Bifacial panels resistant to PID degradation?
Yes, this series is resistant to PID (Potential Induced Degradation), a phenomenon that causes power loss due to voltage differences between the cells and the grounded frame or mounting structure. This resistance keeps the panel's energy output stable throughout its service life, even in large arrays with high system voltage.
Who manufactures Dark PHENex Bifacial panels, and are they a tier 1 supplier?
Dark PHENex Bifacial panels are manufactured by Philadelphia Solar, headquartered in Jordan and classified as a tier 1 manufacturer under the BloombergNEF ranking. Tier 1 status reflects financial stability and bankability, which matters when financing an installation through a loan or lease and for long-term warranty servicing.
Add to compare