Skip to main content
Leapton LP182*210-M-48-NB-445W

Leapton LP182*210-M-48-NB-445W

445 Wp TOPCon Bifacial 80%
ComparePV verdict

Solid all-round for its segment

Rank 6,757 of 14,129
Compare panels Datasheet PDF
Power (Wp)
445
Strong · top 8%
Efficiency (%)
22.27
Typical · median 22.00%
Density (Wp/m²)
222.7
Typical · median 220.2
Temp (%/°C)
-0.300
Typical · median -0.290
Weight (kg)
24.0
Typical · median 22.0 kg
Warranty (yrs)
30
Typical · median 30 yrs

The Leapton LP182*210-M-48-NB series is a photovoltaic module lineup designed for anyone who wants to make the most of every square meter of available mounting space. The panels are built on n-type TOPCon cells using half-cut technology, which translates into more stable electrical parameters and lower losses under partial shading compared to classic PERC structures. The bifacial glass-glass construction captures light reflected off the ground, boosting real-world energy yield both on residential rooftops and in large-scale installations. The black frame and clean module appearance make this series well suited to projects where the building's visual appeal also matters. High resistance to mechanical loads, confirmed by wind and snow load testing, makes these panels a good fit for demanding climates, including regions with heavy snowfall. Thanks to long service life and stable power degradation over time, investors can count on a lower levelized cost of energy (LCOE) across the entire lifespan of the installation. The LP182*210-M-48-NB series is a solution for installers and investors looking for a balance between performance, durability, and aesthetics in a single module.

Ranking

1,220 panels in the segment TOPCon 400-450 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.27% 22.00% Typical 5,544
Power density 222.7 220.2 Typical 5,365
Temperature coefficient -0.300 -0.290 Typical 6,152
Weight per kWp 53.9 51.5 Typical 8,164
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 2 caution
Best for

Residential, commercial, shaded-installations and cold-climate.

What owners get
Top-tier N-type TOPCon cells

Module efficiency up to 23.02% puts the series on par with the best peer comparables (Phono Solar Draco, SunKean SKT440~460M12-96D4), outperforming e.g. Axitec AXIbiperfect GR WB (22.54%). Half-cut TOPCon technology reduces LID losses and improves high-temperature performance compared to legacy PERC structures.

Bifacial glass-glass construction

Double-sided cells in a glass-glass layout capture light reflected off the ground surface, boosting real-world energy yield in both rooftop and utility-scale installations, while also improving mechanical durability versus glass-backsheet designs.

30-year power warranty with high retention threshold

The manufacturer guarantees at least 87.4% of nominal power after 30 years, alongside a 25-year product warranty - better than the segment's common 25-year product / 25-30-year power standard with degradation to ~84.8%. This translates into lower LCOE over the system's full operating lifetime.

Tier-1 status per BloombergNEF

Leapton (founded 2012, HQ in Japan) appears on BloombergNEF's Tier-1 list, meeting bankability criteria required by project financiers, and the series also received a Top Performer rating in the 2025 Kiwa PVEL PV Module Reliability Scorecard.

Aesthetic all-black module design

The black frame and uniform appearance fit well in installations where building aesthetics matter, such as single-family homes with visible roof areas.

Trade-offs
Comparatively small production scale

Despite Tier-1 status, Leapton has a relatively modest annual manufacturing capacity (around 2.15 GW after expansion), far smaller than segment giants like JA Solar, Trina, or LONGi with tens of GW. This may mean less flexibility for large orders and a potentially weaker service network in some regions.

Manufactured in China despite Japanese branding

While Leapton is headquartered in Kobe, Japan, the modules are physically manufactured at a factory in Changshu, China. Buyers expecting Japanese-made production should be aware of this when assessing the brand's premium positioning.

Notes from the database
  • At 22.3% efficiency, this panel is on par with typical TOPCon 400-450W modules
  • Power density of 222.7 W/m² matches the TOPCon 400-450W median
  • Temperature coefficient of -0.30%/°C matches the TOPCon 400-450W median
  • At 24.0 kg (2.0 kg above TOPCon 400-450W median of 22.0 kg), requires checking roof load capacity
  • Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof

Specifications

Open datasheet PDF
Nominal power (Pmax) 445 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.27 % Typical Segment median 22.00%
Vmpp · Impp 29.58 V · 15.04 A Operating point at max power
Voc · Isc 35.63 V · 15.90 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 1762×1134×30 mm · 2.00 m² of roof
Weight 24.0 kg Typical Typical · median 22.0 kg
Cells 96 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.300 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.046 %/°C
NOCT 41 °C At 800 W/m², 20 °C ambient
Product warranty 25 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 389 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Leapton in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 445 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.300 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Leapton LP182*210-M-48-NB-445W 445 W 22.27% -0.300 24.0 kg You are here
AIKO-A495-MCE54Mw 495 W 24.80% -0.260 21.0 kg +50 W, cooler, +2.5 pp
AIKO-A490-MCE54Mw 490 W 24.50% -0.260 21.0 kg +45 W, cooler, +2.2 pp
STP-NT11/48QGSF-490 490 W 24.50% -0.260 21.5 kg +45 W, cooler, +2.2 pp
JAT54S40-485/LR 485 W 24.30% -0.260 19.3 kg +40 W, lighter, +2.0 pp
AIKO-A485-MCE54Mw 485 W 24.30% -0.260 21.0 kg +40 W, cooler, +2.0 pp
LR7-54HJD-495M 495 W 24.30% -0.240 23.5 kg +50 W, cooler, +2.0 pp
AIKO-A485-MAH54Mw 485 W 24.30% -0.260 21.5 kg +40 W, cooler, +2.0 pp
LP182*182-M-54-NH-430W 430 W 21.52% -0.300 22.0 kg -15 W, lighter, -0.8 pp
LP182*182-M-54-NB-435W 435 W 21.77% -0.300 25.0 kg -10 W, heavier, -0.5 pp
LP182*210-M-48-NB-440W 440 W 22.02% -0.300 24.0 kg -0.2 pp
LR7-54HJD-510M 510 W 25.00% -0.240 23.5 kg +65 W, cooler, +2.7 pp
LR7-54HJD-505M 505 W 24.70% -0.240 23.5 kg +60 W, cooler, +2.4 pp
WST-505BKX54-A2 505 W 24.70% -0.260 25.0 kg +60 W, cooler, +2.4 pp
LR7-54HJD-500M 500 W 24.50% -0.240 23.5 kg +55 W, cooler, +2.2 pp
CIPRO-TN9C54M-500W 500 W 24.50% -0.260 21.4 kg +55 W, cooler, +2.2 pp

Found 1402 panels of the same or similar size to this one, within ±10 mm. See them here Found 1432 panels of the same or similar size to this one, within ±25 mm. See them here Found 3651 panels of the same or similar size to this one, within ±50 mm. See them here Found 3999 panels of the same or similar size to this one, within ±100 mm. See them here

About the LP182*210-M-48-NB series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

How does the TOPCon cell technology used in Leapton LP182*210-M-48-NB panels differ from classic PERC cells?
N-type TOPCon cells feature an additional passivation layer that reduces electron recombination, delivering higher efficiency than p-type PERC. In practice this means a smaller power drop at high temperatures and more stable electrical parameters over the panel's lifetime. Thanks to the half-cut cell structure, these panels also handle partial shading better, resulting in higher and more predictable energy yield.
Is it worth installing bifacial Leapton LP182*210-M-48-NB panels on a single-family home roof?
Yes, though the biggest gain from bifacial technology appears with light-colored surfaces or ground-mounted structures where light reflects off the background. On a typical pitched roof the rear-side gain is smaller but still measurable, especially with light-colored tiles or metal roofing. The glass-glass construction also boosts mechanical durability, a benefit independent of how much bifacial gain is realized.
What warranty applies to Leapton LP182*210-M-48-NB panels and what does it cover?
The manufacturer provides a 25-year product warranty covering material and workmanship defects, plus a 30-year linear power output warranty. This means that after 30 years the panel should still deliver the guaranteed percentage of its initial rated power per the datasheet. This warranty level is typical of Tier 1 manufacturers and gives investors greater confidence in the long-term LCOE of the installation.
Is 460 Wp enough power from Leapton LP182*210-M-48-NB panels for a roof with limited space?
A 460 Wp half-cut TOPCon module is among the higher-power panels available in its size class, allowing more kilowatts to be installed with fewer panels. For a typical 10 kWp system, around 22 panels are needed, which meaningfully reduces the required roof area compared to older 350-400 Wp modules.
Will Leapton LP182*210-M-48-NB panels hold up in regions with heavy snowfall?
Yes, the glass-glass construction and black frame have been tested for mechanical load resistance, including snow and wind loads, per industry standards. The stiffer double-glass build also improves resistance to deflection and microcracks under heavy winter loads, making this series a solid choice for harsher climates.
Who manufactures Leapton panels, and is it a reliable choice for a 25-30 year investment?
Leapton operates in the PV market with technological roots tied to Japan and is classified as a Tier 1 manufacturer, indicating financial stability and a proven production line. This status matters for long-term warranties (25-year product, 30-year power), as it lowers the risk of the company disappearing from the market before the warranty period expires.
Add to compare