Efficiency leader, weak in heat
The Leapton LP182*182-M-60-NB series are N-type bifacial modules in a half-cut format, designed to maximize energy output from the same installation area - especially when conditions are not ideal. Thanks to N-type cells (often associated with TOPCon technology), these panels offer improved performance in low-light conditions and slower degradation of parameters over time, which translates to more stable production in the Polish climate.
The dual glass construction enhances durability and resistance to harsh environments, while the bidirectional energy harvesting allows for the utilization of reflected light - which is important on bright roofs, gravel, membranes, or when mounted on the ground. The use of multi-busbar cells (MBB) helps to reduce losses and improve reliability in partially shaded conditions.
This is a good choice for investors who want higher annual yields without increasing service risks - from single-family homes to small and medium-sized commercial installations.
Ranking
Signals from the data
Residential, commercial and shaded-installations.
Hot climates.
Top 23% of the TOPCon 500-550 W segment, against a median of 22.72%.
Top 23% of the TOPCon 500-550 W segment, against a median of 227.4.
Bottom 21% of the TOPCon 500-550 W segment, against a median of -0.290.
N-type TOPCon cells exhibit lower LID/LeTID degradation and better performance at elevated temperatures and low irradiance than older PERC cells, translating into a real annual yield uplift under Polish climate conditions.
Two-sided energy harvesting combined with a glass-glass enclosure captures albedo reflected light (up to several extra percentage points of yield over bright ground surfaces) while also improving mechanical durability compared to glass-backsheet designs.
The manufacturer guarantees at least 87.4% of nominal power after 30 years, exceeding the industry-standard 25-year/80.7% benchmark and outperforming warranty terms offered by many PERC-based panels in this power class.
Leapton is listed on BloombergNEF's Tier-1 manufacturer list (Q1 2026), which eases bank and leasing financing for projects and signals financial stability and production scale.
The half-cut design with multi-busbar (MBB) technology reduces resistive losses and improves reliability under partial shading, relevant for irregular installation conditions such as chimneys, antennas, or nearby trees.
The series' maximum efficiency (22.17%) trails competing modules at the same 480 Wp power class, such as the Gamko GKA96N-PRO (24.02%) and Sunket SKT460~480M10-120D3 (22.24%). This means a slightly larger module area is needed to reach the same power output, which may matter on roofs with limited surface area.
- Efficiency of 23.1% matches the TOPCon 500-550W median
- At 231.0 W/m² power density, this panel generates 3.6 W/m² more per unit area than TOPCon 500-550W median (227.4 W/m²)
- Temperature coefficient of -0.30%/°C matches the TOPCon 500-550W median
- Weight of 26.0 kg is typical for TOPCon 500-550W panels
- 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces
Specifications
Datasheet charts
Measured curves published by Leapton in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 500 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Found 779 panels of the same or similar size to this one, within ±10 mm. See them here Found 788 panels of the same or similar size to this one, within ±25 mm. See them here Found 945 panels of the same or similar size to this one, within ±50 mm. See them here Found 1540 panels of the same or similar size to this one, within ±100 mm. See them here
About the LP182*182-M-60-NB series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.