Skip to main content
Kensol Brand review

MNHTR2-BI-435

435 Wp Monocrystalline Bifacial 80%
ComparePV verdict

Strong in heat, heavy for its output

Rank 6,597 of 14,005
Compare panels Datasheet PDF
Power (Wp)
435
Typical for its class
Efficiency (%)
21.80
Typical · median 21.51%
Density (Wp/m²)
217.7
Typical · median 215.1
Temp (%/°C)
-0.280
Strong · top 11%
Weight (kg)
24.6
Weak · 1.1 kg above median
Warranty (yrs)
30
Typical · median 30 yrs

The Kensol PERUN GLASS DUO panel series is an advanced solution based on a glass-glass construction, which guarantees extreme durability and resistance to degradation caused by atmospheric factors. Thanks to the use of N-Type TOPCon cell technology, these modules offer higher efficiency and significantly better performance in low-light conditions compared to standard solutions. A key advantage of the series is its bifaciality, allowing for the generation of additional energy from reflected radiation, which is particularly effective on light-colored surfaces or ground-mounted installations. This solves the problem of rapid power loss over the years, ensuring a stable energy yield for decades. PERUN GLASS DUO also stands out with the highest class of resistance to fire and mechanical loads, making it an ideal choice for demanding commercial systems and modern single-family homes. Unlike traditional modules with a protective backsheet, the double glass construction completely eliminates the risk of micro-cracks and moisture penetration into the laminate. This product is dedicated to investors looking for premium technology that combines innovation with a maximum service life, ensuring safety and a reliable return on investment in the Polish climate.

Ranking

7,027 panels in the 335-535 W band, all technologies
Metric This panel Median Position in segment Overall rank
Module efficiency 21.80% 21.51% Typical 7,022
Power density 217.7 215.1 Typical 7,066
Temperature coefficient -0.280 -0.300 Strong · top 11% 1,309
Weight per kWp 56.6 52.8 Weak · bottom 22% 10,706
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

6 positive · 3 caution
Best for

Residential and commercial.

Not ideal for

Weight-limited structures.

Strengths
-0.280 %/°C temperature coefficient

Top 11% of the 335-535 W band, against a median of -0.300.

Watch-outs
56.6 kg per kWp

Bottom 22% of the 335-535 W band, against a median of 52.8.

What owners get
Efficiency up to 23%, matching market leaders

The 21.52-23% efficiency range puts the PERUN GLASS DUO series on par with leading TOPCon products such as Phono Solar Draco (23.02%) and SunKean SKT440-460 (23.02%), and clearly ahead of Axitec AXIbiperfect GR WB (22.54%).

Glass-glass construction with bifacial technology

The dual-glass design fully eliminates the risk of microcracks and moisture ingress into the laminate, while bifaciality enables additional energy yield from reflected irradiance - especially effective in ground-mount installations and on high-albedo surfaces.

30-year product and power warranty

The manufacturer offers 30 years of warranty on both the product and power output - significantly beyond the standard 12/25-year terms offered by most manufacturers in the segment, reducing long-term investment risk.

N-Type TOPCon cells

N-Type TOPCon technology delivers a lower LID/LeTID degradation coefficient and better performance under low-light conditions and high temperatures compared to older P-type PERC cells.

Polish manufacturer operating since 2014

Kensol is headquartered in Poland and has been active in the market for over a decade, easing logistics, warranty claims, and service compared to imports from Asian suppliers.

Trade-offs
No confirmed BNEF Tier 1 status

Unlike some comparable manufacturers (e.g., Phono Solar), available sources do not confirm Kensol's presence on the BNEF Tier 1 list, which may matter to institutional investors and bank-financed projects when assessing product bankability.

Short market track record for the series

The PERUN GLASS DUO series launched in 2023, so multi-year independent field-test data on real-world power degradation is still limited compared to manufacturers with a longer history in glass-glass TOPCon products.

Notes from the database
  • Efficiency of 21.8% matches the database median
  • At 217.7 W/m² power density, roof space requirements are typical for database panels
  • Temperature coefficient of -0.28%/°C matches the database median
  • At 24.6 kg, this panel is 1.9 kg lighter than database median (26.5 kg) - easier handling during installation
  • 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces

Specifications

Open datasheet PDF
Nominal power (Pmax) 435 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 21.80 % Typical Segment median 21.51%
Vmpp · Impp 29.44 V · 14.78 A Operating point at max power
Voc · Isc 34.31 V · 15.65 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 1762×1134×30 mm · 2.00 m² of roof
Weight 24.6 kg Weak Weak · 1.1 kg above median
Cells 96 Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.280 %/°C Strong top 11% of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 30 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 385 W guaranteed
Degradation 2.00 → 0.33 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Kensol in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 435 Wp appear here. The rest cover the whole series.

I-V Characteristics at Different Irradiance I-V Characteristics at Different Irradiance Whole series P-V Characteristics at Different Irradiance P-V Characteristics at Different Irradiance Whole series

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.280 %/°C against a segment median of -0.300
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Kensol MNHTR2-BI-435 435 W 21.80% -0.280 24.6 kg You are here
JAT54S40-485/LR 485 W 24.30% -0.260 19.3 kg +50 W, lighter, +2.5 pp
AIKO-A485-MCE54Mw 485 W 24.30% -0.260 21.0 kg +50 W, lighter, +2.5 pp
AIKO-A485-MAH54Mw 485 W 24.30% -0.260 21.5 kg +50 W, lighter, +2.5 pp
GK-5-54HG-485M 485 W 24.30% -0.260 21.0 kg +50 W, lighter, +2.5 pp
ZEUS 3.0+ 108 485WP 485 W 24.30% -0.260 24.2 kg +50 W, cooler, +2.5 pp
KS430MNHTR3-BI 430 W 21.52% -0.300 21.2 kg Hotter, lighter, -0.3 pp
MNHTR2-BI-440 440 W 22.00% -0.280 24.6 kg Very close match
MNHTR2-BI-445 445 W 22.30% -0.280 24.6 kg +10 W, +0.5 pp
LR7-54HJD-510M 510 W 25.00% -0.240 23.5 kg +75 W, cooler, +3.2 pp
AIKO-A495-MCE54Mw 495 W 24.80% -0.260 21.0 kg +60 W, lighter, +3.0 pp
LR7-54HJD-505M 505 W 24.70% -0.240 23.5 kg +70 W, cooler, +2.9 pp
AIKO-A490-MCE54Mw 490 W 24.50% -0.260 21.0 kg +55 W, lighter, +2.7 pp
LR7-54HJD-500M 500 W 24.50% -0.240 23.5 kg +65 W, cooler, +2.7 pp
CIPRO-TN9C54M-500W 500 W 24.50% -0.260 21.4 kg +65 W, lighter, +2.7 pp

Found 1395 panels of the same or similar size to this one, within ±10 mm. See them here Found 1425 panels of the same or similar size to this one, within ±25 mm. See them here Found 3614 panels of the same or similar size to this one, within ±50 mm. See them here Found 3962 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What is the warranty on Kensol PERUN GLASS DUO solar panels?
The Kensol PERUN GLASS DUO series comes with a 30-year product warranty and a 30-year power output warranty. This is among the longest warranty coverage available on the market. The manufacturer guarantees that after 30 years of operation the module will retain at least 87.4% of its initial rated power, making it an exceptionally secure long-term investment.
Do Kensol PERUN GLASS DUO panels perform well in overcast conditions?
Yes. The N-Type TOPCon cell technology used in the PERUN GLASS DUO series delivers significantly better performance under low-irradiance conditions compared to standard PERC modules. In climates with a high number of cloudy days this translates into measurably higher annual energy yield. The double-glass construction also handles frost, moisture, and hail reliably throughout the module's lifetime.
How does the double-glass construction of PERUN GLASS DUO differ from conventional backsheet modules?
Standard modules use a polymer backsheet that is susceptible to microcracks, yellowing, and moisture ingress over time. PERUN GLASS DUO replaces the backsheet with a full tempered glass layer, completely eliminating these failure modes. The result is higher mechanical strength, improved fire resistance class, and a significantly slower degradation rate across the entire service life of the installation.
Does the bifacial design of PERUN GLASS DUO make sense for a rooftop installation?
Bifacial modules deliver the greatest gain in ground-mounted systems with a light-colored albedo surface (gravel, concrete, snow), where the rear side can capture 5–25% additional energy from reflected irradiance. On a pitched roof the gain is smaller but still measurable, especially with a light-colored roof surface or nearby white facades. For maximum bifacial yield, plan for adequate clearance between the module and the mounting surface.
What is the rated power of a Kensol PERUN GLASS DUO panel, and what system types is it designed for?
Modules in the PERUN GLASS DUO series reach up to 460 Wp maximum power output. The series is designed for both modern residential installations and demanding commercial PV systems. The high per-panel power rating means fewer modules are needed to reach a given system capacity, which reduces BoS costs including racking hardware and cabling.
Is Kensol a Polish brand, and does that matter when buying PERUN GLASS DUO panels?
Yes, Kensol is headquartered in Poland. For installers and investors this means faster delivery logistics, shorter lead times, and straightforward warranty claims without dealing with overseas service centers. It also means technical support and documentation are readily available in Polish, which simplifies system design and after-sales service.
Add to compare