Middle of its segment, short guarantee
The JS Solar JS182MHC120 solar panel series is a technologically advanced solution based on Half-Cut monocrystalline cells, setting new efficiency standards for residential installations and large-scale solar farms. The use of Multi-Busbar technology significantly reduces energy losses resulting from internal resistance, leading to more stable system operation over many years. A key technological differentiator of this series is the gallium-doping of cells, which almost entirely eliminates the problem of light-induced degradation (LID), ensuring higher energy yields for investors in the long run. By dividing the module into two independent sections, these panels perform excellently in partial shading conditions, solving the problem of power drops in challenging locations. This is an option for demanding users who prioritize maximum power density per unit of roof area. The JS182MHC120 stands out from the competition with its excellent resistance to mechanical loads and low temperature coefficient. As a result, these modules maintain high efficiency even on hot days, which, combined with their durability, guarantees a faster return on investment in the variable weather conditions typical of the Polish market.
Ranking
Signals from the data
Residential, commercial, shaded-installations and hot-climate.
Owners who want a long output guarantee.
Bottom 17% of the 350-550 W band, against a median of 30 yrs.
Gallium doping instead of boron virtually eliminates Light-Induced Degradation: first-year degradation drops to ~0.5% versus ~2–3% typical for standard boron-doped PERC cells. Over a 25-year horizon this translates to an estimated 3–5% higher cumulative energy yield compared to older cell generations without gallium doping.
Splitting cells in half reduces operating current by 50%, cutting resistive (I²R) losses and limiting the impact of partial shading — a fault in one string does not deactivate the entire module. The Multi-Busbar configuration shortens current paths and improves the fill factor (FF), increasing real-world daily energy harvest.
Peak efficiency of 21.48% at 465 Wp outperforms the peer-comparable Vikram Solar SOMERA (20.91% at the same wattage) by 0.57 pp. For a typical residential installation on a 30 m² roof this difference can translate to roughly 100–150 Wp of additional installed capacity versus less efficient models in the same class.
The manufacturer guarantees a 25-year linear power warranty. At a typical degradation rate of ~0.45%/year after year one, modules are expected to retain over 84% of nominal power in the final warranty year — consistent with the premium standard for monocrystalline 450–465 Wp modules.
JS Solar does not appear on BloombergNEF's bankable manufacturer list (Q1 2026), unlike peers such as Jinko Solar or JA Solar. This limits financing eligibility for utility-scale projects (>1 MW) that require Tier 1 bankability from lenders and may reduce asset valuation in secondary-market transactions.
The series launched in 2021 on P-type PERC cells. Direct peer Luxor Solar ECO LINE TOPCon achieves 23.6% efficiency at the same 465 Wp — a +2.12 pp gap. N-type TOPCon cells also typically deliver a better temperature coefficient for Pmax (~−0.30 to −0.34%/°C vs. ~−0.35 to −0.37%/°C for PERC), yielding higher output on hot summer days.
The monofacial module generates no energy from ground-reflected light. Under typical ground-mount or light-colored rooftop conditions, bifacial gain ranges from 5–15%. Peer competitor Luxor ECO LINE Glass-Glass Bifacial at the same 465 Wp nominal rating delivers measurably higher annual energy yield, particularly on installations optimized for bifacial harvest.
- Module efficiency of 20.8% is 1.0pp below average for database panels (median: 21.8%)
- 207.9 W/m² power density is 10.2 W/m² below database median (218.1 W/m²) - requires larger installation area
- At -0.34%/°C, loses 0.04pp more power per degree than database median (-0.30%/°C)
- Weight of 23.0 kg (3.5 kg below database median of 26.5 kg) allows easier transport and roof mounting
- In the top 75% for efficiency among all N-type panels
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Alternatives
Found 746 panels of the same or similar size to this one, within ±10 mm. See them here Found 755 panels of the same or similar size to this one, within ±25 mm. See them here Found 916 panels of the same or similar size to this one, within ±50 mm. See them here Found 1503 panels of the same or similar size to this one, within ±100 mm. See them here