Skip to main content
Jinko Solar JKM525-54HL4M-BDV
Jinko Solar Brand review

JKM525-54HL4M-BDV

525 Wp TOPCon Bifacial
ComparePV verdict

Efficiency leader, no clear weak spot

Rank 4,426 of 14,005
Compare panels Datasheet PDF
Power (Wp)
525
Strong · top 21%
Efficiency (%)
23.61
Strong · top 5%
Density (Wp/m²)
236.1
Strong · top 5%
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
27.0
Typical · median 27.0 kg
Warranty (yrs)
30
Typical · median 30 yrs

The Jinko Solar Tiger Neo 54HL4M-BDV series are modules engineered for maximum yield from the same surface area, combining the benefits of bifacial dual-glass construction with N-type TOPCon cells. Dual-sided operation enables truly recovering energy from reflected light (such as off a light-colored roof, gravel, membrane, or snow), leading to a higher annual energy output, especially in space-constrained installations.

A key feature of this series is HOT 3.0 (with enhanced metallization), focused on higher efficiency and module performance stability over time. This translates to reduced risks of degradation common in older technologies and more predictable yields over the long term. Furthermore, the rigid, glass-to-glass structure supports mechanical durability and enhanced longevity in demanding environmental conditions.

This is an excellent choice for residential and commercial installations, particularly where low lifecycle energy cost, high reliability, and additional rear side gain are important.

Ranking

432 panels in the segment TOPCon 500-550 W
Metric This panel Median Position in segment Overall rank
Module efficiency 23.61% 22.73% Strong · top 5% 621
Power density 236.1 227.4 Strong · top 5% 645
Temperature coefficient -0.290 -0.290 Typical 2,165
Weight per kWp 51.4 52.4 Typical 4,804
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

7 positive · 2 caution
Best for

Residential, commercial and hot-climate.

Strengths
23.61% module efficiency

Top 5% of the TOPCon 500-550 W segment, against a median of 22.73%. Ranked 621st in the whole database.

236.1 watts per square metre

Top 5% of the TOPCon 500-550 W segment, against a median of 227.4. Ranked 645th in the whole database.

What owners get
N-type TOPCon with HOT 3.0 Technology

N-type TOPCon cells featuring HOT 3.0 metallization enhancement (SMBB) deliver a temperature coefficient of Pmax at -0.29%/°C, outperforming standard PERC modules (-0.35%/°C). Reduced susceptibility to LID and LeTID degradation results in more stable long-term energy output.

Up to 23.61% Efficiency – Top of Segment

Peak module efficiency of 23.61% matches the best peer comparables (Jolywood JW-HD108N-R2: 23.6%) and clearly exceeds VSUN N-132MH-BB TOPCon (22.11%), enabling higher energy yield from the same roof or ground area.

30-Year Power Warranty, 87.4% Retention

JinkoSolar guarantees annual degradation of 0.40% (years 2–30) with 1% in year one, ensuring a minimum of 87.4% of rated power after 30 years. The linear warranty scope exceeds the 25-year terms offered by many competing Tier-1 manufacturers.

JinkoSolar #1 Bankable per BNEF

JinkoSolar is the only PV module manufacturer to achieve a 100% bankability score in Bloomberg BNEF's PV Module Bankability Survey, holding the top position for 10 consecutive years (2024–2025 data). This reduces counterparty risk for project finance and supports LCOE predictability over the 30-year warranty period.

Bifacial Dual-Glass Construction

Bifacial cells encapsulated in a dual-glass frame (2+2 mm tempered glass) recover energy from reflected albedo (gravel, white membrane, snow) while delivering superior mechanical resistance to snow and wind loads, and better moisture ingress protection compared to backsheet-based modules.

Trade-offs
~27 kg Weight – Roof Load Constraint

The module weighs approximately 27 kg (1961×1134×30 mm, dual 2 mm glass), equating to roughly 12.2 kg/m². On older structures with limited load-bearing capacity, a structural assessment may be required or the format may be outright unsuitable — a constraint JinkoSolar itself acknowledged by launching the "Light Diamond" lightweight line.

Bifacial Gain Limited on Pitched Rooftops

Full bifacial potential is realized in ground-mount or flat-roof installations with high-albedo surfaces, where rear-side gain can reach 10–25% additional yield. On typical pitched residential roofs with dark underlays, rear-side irradiance is significantly reduced, narrowing the cost-per-watt advantage over cheaper monofacial alternatives.

Notes from the database
  • Efficiency of 23.6% is 0.9pp above the TOPCon 500-550W median (22.7%)
  • At 236.1 W/m² power density, this panel generates 8.7 W/m² more per unit area than TOPCon 500-550W median (227.4 W/m²)
  • Temperature coefficient of -0.29%/°C matches the TOPCon 500-550W median
  • Ranked #621 out of 14005 panels for efficiency in the database

Specifications

Open datasheet PDF
Nominal power (Pmax) 525 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 23.61 % Strong Segment median 22.73%
Vmpp · Impp 35.05 V · 14.98 A Operating point at max power
Voc · Isc 41.23 V · 15.88 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 1961×1134×30 mm · 2.22 m² of roof
Weight 27.0 kg Typical Typical · median 27.0 kg
Cells 108 · TOPCon Monocrystalline
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
Product warranty 15 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 459 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Jinko Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 525 Wp appear here. The rest cover the whole series.

30-year Linear Performance Warranty 30-year Linear Performance Warranty Whole series

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Filter these
Size
Panel Power Eff. Temp. Weight Difference
Jinko Solar JKM525-54HL4M-BDV 525 W 23.61% -0.290 27.0 kg You are here
LR7-54HJD-510M 510 W 25.00% -0.240 23.5 kg Cooler, lighter, +1.4 pp
AIKO-A495-MCE54Mw 495 W 24.80% -0.260 21.0 kg -30 W, lighter, +1.2 pp
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg +35 W, cooler, +1.2 pp
LR7-54HJD-505M 505 W 24.70% -0.240 23.5 kg Cooler, lighter, +1.1 pp
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg +30 W, cooler, +1.0 pp
AIKO-A490-MCE54Mw 490 W 24.50% -0.260 21.0 kg -35 W, lighter, +0.9 pp
LR7-54HJD-500M 500 W 24.50% -0.240 23.5 kg Cooler, lighter, +0.9 pp
JKM495-54HL4M-BDV 495 W 22.26% -0.290 27.0 kg -30 W, -1.3 pp
JKM500-54HL4M-BDV 500 W 22.48% -0.290 27.0 kg -25 W, -1.1 pp
JKM505-54HL4M-BDV 505 W 22.71% -0.290 27.0 kg -20 W, -0.9 pp
JKM510-54HL4M-BDV 510 W 22.93% -0.290 27.0 kg -15 W, -0.7 pp
JKM515-54HL4M-BDV 515 W 23.16% -0.290 27.0 kg -10 W, -0.4 pp
JKM520-54HL4M-BDV 520 W 23.38% -0.290 27.0 kg -0.2 pp
LR7-60HVHL-550M 550 W 24.40% -0.260 16.3 kg Cooler, lighter, +0.8 pp
JAT60S40-540/LR 540 W 24.40% -0.260 23.5 kg Cooler, lighter, +0.8 pp
GK-5-60HG-540M 540 W 24.40% -0.260 23.3 kg Cooler, lighter, +0.8 pp

Found 471 panels of the same or similar size to this one, within ±10 mm. See them here Found 508 panels of the same or similar size to this one, within ±25 mm. See them here Found 662 panels of the same or similar size to this one, within ±50 mm. See them here Found 1471 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What warranty does the Jinko Solar Tiger Neo 54HL4M-BDV come with?
Jinko Solar provides a 15-year product warranty and a 30-year linear power warranty. First-year power retention is guaranteed at no less than 99% of rated output, falling no lower than 87.4% by year 30. Annual degradation after year one is just 0.40%, one of the best figures in its class and a key driver of low long-term LCOE for residential and commercial systems alike.
How much extra energy does the bifacial design of the Jinko Tiger Neo 54HL4M-BDV actually deliver?
Real-world bifacial gain depends on the albedo of the surface beneath the array. Light-colored roofing membranes, gravel, or snow can boost annual yield by 5-15% or more. Ground-mount and carport installations benefit most from the rear-side contribution. On dark flat rooftops the gain is smaller but still measurable, making bifacial worthwhile in almost any installation scenario.
What is HOT 3.0 technology in the Jinko Tiger Neo 54HL4M-BDV and why does it matter?
HOT 3.0 is Jinko's advanced metallization process for N-type TOPCon cells that actively suppresses LID and LeTID degradation, which erode output in older P-type modules during the first years of operation. The result is a more stable power curve over the 30-year warranty period, with annual degradation of only 0.40% after year one. For any system where LCOE is a priority, that stability directly improves return on investment.
Do Jinko Tiger Neo 54HL4M-BDV panels lose significant power on hot summer days?
The temperature coefficient of Pmax is -0.29%/°C, among the lowest values for N-type TOPCon modules currently on the market. A 10°C rise in cell temperature above STC reduces output by roughly 2.9%, compared with 3.4-4.0% for older PERC technology. During warm Central European summers this translates into measurably higher energy yield relative to legacy PERC installations of equivalent nameplate capacity.
How heavy is the Jinko Solar Tiger Neo 54HL4M-BDV and will my roof structure support it?
The module weighs approximately 27 kg and measures 1961 x 1134 x 30 mm. The dual-glass construction adds weight compared with a standard backsheet panel, so a structural assessment is advisable for older timber rafters or clay-tile roofs before committing to purchase. Commercial flat rooftops and ground-mount systems handle this format routinely, as racking and ballast systems are engineered per project anyway.
How does N-type TOPCon in the Jinko 54HL4M-BDV compare to older PERC panels?
N-type TOPCon cells are inherently immune to LID, the light-induced degradation that reduces rated output in P-type PERC modules during their first operational years. Module efficiency in this series reaches up to 23.61%, delivering more watt-peak per square meter of roof space than a comparable PERC product. Combined with a lower temperature coefficient and HOT 3.0 metallization, TOPCon offers a measurably better 30-year energy yield curve than PERC for new installations.
Add to compare