Light for its output, no clear weak spot
The Jinko Solar Tiger Neo 60HL4-(V) series features monocrystalline modules engineered for high energy yield from the same surface area, especially beneficial when rooftops or plots restrict installation space. Key components are N-type TOPCon cells, which maintain performance levels better over time and are less susceptible to common degradation mechanisms found in older technologies. Practically, this translates to more predictable energy gains and smoother long-term operation.
Reliability in real-world conditions is also paramount in this series-SMBB enhances current collection and minimizes losses, while HOT 2.0 ensures stable performance at elevated temperatures, a critical factor for rooftop and ground installations during summer months. Modules are also designed with a strong focus on anti-PID capabilities, addressing performance drops caused by factors like high system voltage and humidity.
The Tiger Neo 60HL4-(V) is ideal for residential, commercial, and premium consumer installations-anywhere long-term yield, stability, and the advantages of newer-generation technology, which genuinely differentiate it from standard PERC solutions, are essential.
Ranking
Signals from the data
Residential, commercial, hot-climate and shaded-installations.
Top 4% of the TOPCon 500-550 W segment, against a median of 52.4. Ranked 574th in the whole database.
Top 19% of the TOPCon 500-550 W segment, against a median of 22.74%.
Top 21% of the TOPCon 500-550 W segment, against a median of 227.4.
The top variant (JKM500N) achieves 23.17% module efficiency - roughly 2.1-2.2 percentage points above comparable PERC modules such as Emmvee GRAPHITE MonoPerc (21.03%) and Lina Energy LEPV 132 HC (21.06%). This directly translates into higher energy yield per unit of rooftop or ground area without increasing the number of modules.
N-type TOPCon cells exhibit lower light-induced degradation (LID) and are inherently resistant to potential-induced degradation (PID). Annual degradation after year one is ≤0.4%/yr versus ≤0.55%/yr typical for PERC modules - a difference that compounds to several additional percent of energy output over the full system lifetime.
JinkoSolar guarantees ≥87.4% of rated power after 30 years, with annual degradation capped at ≤0.4 pp/yr after year one. Many mid-range competitors offer only 25-year power warranties with end-of-life thresholds around 84.8%, making this a stronger long-term performance commitment for LCOE-sensitive projects.
In the Bloomberg BNEF Bankability Report 2025, JinkoSolar was the only module manufacturer rated bankable by 100% of financial respondents - a distinction held for 10 consecutive years. With 86.8 GW shipped in 2025 (global #1), the company offers best-in-class supply chain continuity and warranty backstop credibility for the full system lifetime.
Super Multi Busbar (SMBB) technology reduces series resistance and micro-crack-related power losses, while HOT 2.0 improves cell output at elevated operating temperatures common on sloped rooftops and ground-mount systems in summer (module temperatures typically reaching 60-75°C). The result is a lower temperature coefficient of power and higher peak-hour yield versus standard PERC modules at the same nameplate rating.
Tiger Neo 60HL4-(V) reached end-of-life in 2024, just three years after its 2021 launch. No new factory shipments are available, market stock is limited, and sourcing additional identical modules for system expansion or like-for-like replacement after a panel failure may prove increasingly difficult over the coming years.
The series does not support bifacial energy collection. Comparable next-generation variants (e.g., Jinko Tiger Neo 54HL4H-BDV bifacial) can harvest 5-30% additional energy from ground albedo in ground-mount and flat-roof installations with light-colored membranes - a material difference in long-term LCOE calculations for commercial and utility-scale PV projects.
- At 23.2% efficiency, this panel is on par with typical TOPCon 500-550W modules
- At 231.3 W/m² power density, this panel generates 3.9 W/m² more per unit area than TOPCon 500-550W median (227.4 W/m²)
- Temperature coefficient of -0.29%/°C matches the TOPCon 500-550W median
- Weight of 22.5 kg (4.5 kg below TOPCon 500-550W median of 27.0 kg) allows easier transport and roof mounting
- #1518 for efficiency, #2220 for temperature performance out of 14129 panels
Specifications
Datasheet charts
Measured curves published by Jinko Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 500 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Found 744 panels of the same or similar size to this one, within ±10 mm. See them here Found 760 panels of the same or similar size to this one, within ±25 mm. See them here Found 911 panels of the same or similar size to this one, within ±50 mm. See them here Found 1504 panels of the same or similar size to this one, within ±100 mm. See them here
About the Tiger Neo 60HL4-(V) (mono-facial module) series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.