Skip to main content

Jetion JT570SSt(B)

570 Wp TOPCon Bifacial 85%
ComparePV verdict

Solid all-round for its segment

Rank 5,305 of 14,129
Compare panels Datasheet PDF
Power (Wp)
570
Typical for its class
Efficiency (%)
22.10
Typical · median 22.44%
Density (Wp/m²)
220.7
Typical · median 224.4
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
31.0
Typical · median 31.2 kg
Warranty (yrs)
30
Typical · median 30 yrs

The JT SSt(B) series from Jetion Solar consists of dual-glass monocrystalline modules engineered for installations where maximizing energy yield under demanding operating conditions is the priority. The panels use N-type TOPCon technology with multiple busbars, delivering higher conversion efficiency and lower resistive losses compared to conventional PERC cells. The bifacial cell design, housed in a glass-glass construction, captures light reflected from the ground surface, allowing the rear side of the module to generate additional power and significantly reducing the levelized cost of electricity (LCOE) over the system's lifetime. The series stands out for its low LID/LETID degradation, ensuring more stable energy output over decades of operation, while strict quality control and double EL inspection minimize the risk of PID effects. The module construction has been optimized for resistance to extreme weather conditions - high wind and snow loads as well as hail impacts are not an issue, making it a solid choice for installations in regions with variable climates. The manufacturer backs the series with a 30-year linear power output warranty, giving investors confidence in the long-term profitability of their projects. The JT SSt(B) is a solution dedicated to commercial installations and solar farms, where predictable performance and low operating costs over the entire service life matter most.

Ranking

1,022 panels in the segment TOPCon 550-600 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.10% 22.44% Typical 6,076
Power density 220.7 224.4 Typical 6,121
Temperature coefficient -0.290 -0.290 Typical 2,220
Weight per kWp 54.4 53.8 Typical 8,772
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 2 caution
Best for

Utility-scale and commercial.

What owners get
N-type TOPCon with multi-busbar

Multi-busbar N-type TOPCon cells deliver up to 22.8% efficiency and significantly lower LID/LETID degradation compared to classic PERC cells, translating into higher and more stable energy yield over a 25-30 year horizon.

Dual-glass bifacial construction

Bifacial cells in a double-glass housing capture light reflected from the ground and generate additional rear-side energy, lowering LCOE across the full lifecycle of the installation - a key advantage for commercial projects and utility-scale PV farms.

30-year linear power warranty

The manufacturer guarantees 30 years of linear power degradation with a 12-year product warranty, matching the best comparable series on the market (Talesun TM7G72M, Horay HS 182-144 TC-D Ocean, AE Solar HORIZON CMD-144BDS) and giving investors predictable long-term returns.

Top-tier segment specifications

Power output up to 590Wp and efficiency up to 22.8% place the JT SSt(B) series on par with leading competitors in the bifacial TOPCon 144-cell segment, showing no meaningful gap versus the best solutions available in the 2026 market.

Mechanical durability and quality control

The module design is optimized for high wind and snow loads and hail impact resistance, backed by dual EL inspection, minimizing PID risk and failure rates in demanding operating environments - important for installations in variable climates.

Trade-offs
Non-continuous Tier-1 status history

Jetion Solar held BNEF Tier 1 status in Q4 2020, was subsequently dropped from the list, and only returned in Q2 2024 after BNEF tightened its criteria. This is a less continuous bankability track record than manufacturers with uninterrupted Tier-1 status spanning over a decade (e.g., Trina Solar, JA Solar), which may matter during project financing due diligence.

Lack of long-term field data

The JT SSt(B) series launched in 2025, so no multi-year real-world operational data yet confirms the claimed 30-year linear power degradation - unlike competing TOPCon series that have been on the market since 2021-2022.

Notes from the database
  • Efficiency of 22.1% matches the TOPCon 550-600W median
  • At 220.7 W/m², this panel generates 3.8 W/m² less per unit area than TOPCon 550-600W median (224.4 W/m²)
  • At -0.29%/°C, hot weather performance is typical for TOPCon 550-600W panels
  • 85% bifaciality enables rear-side power generation, boosting yield by 4-13% on reflective surfaces
  • Ranked #6076 out of 14129 panels for efficiency in the database

Specifications

Open datasheet PDF
Nominal power (Pmax) 570 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.10 % Typical Segment median 22.44%
Vmpp · Impp 42.32 V · 13.47 A Operating point at max power
Voc · Isc 51.07 V · 14.25 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2278×1134×30 mm · 2.58 m² of roof
Weight 31.0 kg Typical Typical · median 31.2 kg
Cells 144 · TOPCon Monocrystalline
Bifaciality 85 % Rear output as a share of front
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.240 · 0.045 %/°C
NOCT 43 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 498 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Jetion in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 570 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Jetion JT570SSt(B) 570 W 22.10% -0.290 31.0 kg You are here
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg Cooler, lighter, +2.7 pp
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg Cooler, lighter, +2.5 pp
LR7-60HVHL-550M 550 W 24.40% -0.260 16.3 kg Cooler, lighter, +2.3 pp
JAT60S40-540/LR 540 W 24.40% -0.260 23.5 kg -30 W, lighter, +2.3 pp
GK-5-60HG-540M 540 W 24.40% -0.260 23.3 kg -30 W, lighter, +2.3 pp
JKM545-54QL6-DV-F1-EU 545 W 24.27% -0.260 27.5 kg Cooler, lighter, +2.2 pp
LR7-60HVH-545M 545 W 24.20% -0.260 25.0 kg Cooler, lighter, +2.1 pp
JT540SGh 540 W 20.90% -0.350 29.0 kg Hotter, -1.2 pp, -5 yr warranty
JT545SGh 545 W 21.10% -0.350 29.0 kg Hotter, -1.0 pp, -5 yr warranty
JT550SGh 550 W 21.30% -0.350 29.0 kg Hotter, -0.8 pp, -5 yr warranty
JT575SSt(B) 575 W 22.20% -0.290 31.0 kg Very close match
JT580SSt(B) 580 W 22.40% -0.290 31.0 kg +10 W, +0.3 pp
JT585SSt(B) 585 W 22.60% -0.290 31.0 kg +15 W, +0.5 pp
JT590SSt(B) 590 W 22.80% -0.290 31.0 kg +20 W, +0.7 pp
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +80 W, lighter, +3.1 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg +75 W, lighter, +2.9 pp

Found 2327 panels of the same or similar size to this one, within ±10 mm. See them here Found 2369 panels of the same or similar size to this one, within ±25 mm. See them here Found 2383 panels of the same or similar size to this one, within ±50 mm. See them here Found 2548 panels of the same or similar size to this one, within ±100 mm. See them here

About the JT SSt(B) series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

How does TOPCon technology in Jetion JT SSt(B) panels differ from classic PERC cells?
The N-type TOPCon cells used in the JT SSt(B) series feature an additional passivating oxide layer that reduces electron recombination at the cell surface. This results in higher conversion efficiency than classic P-type PERC cells and lower current losses. TOPCon also handles high temperatures better and shows lower LID/LETID degradation, leading to more stable energy yield throughout the panel's lifetime.
How much extra energy do bifacial JT SSt(B) panels generate compared to a standard module?
Thanks to the glass-glass construction, JT SSt(B) panels also capture light reflected from the ground, roof, or bright surfaces beneath the array. Depending on ground albedo, mounting height, and installation type, the additional rear-side energy gain can range from a few to over ten percent, effectively lowering the levelized cost of energy (LCOE) over the system's lifetime.
What warranty does the Jetion JT SSt(B) series offer on power output and the product itself?
JT SSt(B) panels come with a 30-year linear power output warranty and a 12-year product warranty covering material and manufacturing defects. The long power warranty is possible thanks to TOPCon's low degradation rate and strict quality control, including double EL inspection that minimizes the risk of PID effect.
Are Jetion JT SSt(B) panels suitable for regions with heavy snow and wind loads?
Yes, the JT SSt(B) series is engineered for resistance to extreme weather conditions, including high wind and snow loads as well as hail impact. This makes the panels a solid choice for installations in regions with variable and demanding climates, suitable for both commercial projects and utility-scale solar farms.
What type of installations is the JT SSt(B) series designed for - is it suitable for residential rooftops?
The JT SSt(B) series is primarily designed for commercial installations and utility-scale solar farms, where predictable performance and low operating costs at scale matter most. With power output up to 590 Wp and bifacial technology, it performs best in ground-mount systems or large rooftop arrays where the rear-side energy gain can be fully utilized.
Is Jetion a Tier 1 manufacturer, and where are JT SSt(B) panels produced?
Yes, Jetion Solar holds Tier 1 manufacturer status, reflecting financial stability, long-standing industry experience, and bankability for credit-financed projects. The company is headquartered in China, where its main production facilities are located, and JT SSt(B) panels undergo multi-stage quality control before shipping to customers worldwide.
Add to compare