Strong in heat, heavy for its output
The Horay Solar HS 186R-108 TC-D Alpine series utilizes advanced N-type TopCon technology, which redefines efficiency standards even in difficult lighting conditions. The Double Glass construction provides exceptional mechanical resistance to extreme snow and wind loads, making these modules an ideal choice for investments in demanding climates. Thanks to the use of bifacial cells, the panels effectively utilize light reflected from the ground, significantly increasing the total energy yield from a limited mounting surface. A key feature of the series is minimal linear degradation, which guarantees stable power production for decades, effectively solving the problem of rapid efficiency loss known from older-generation modules. The product is aimed at conscious prosumers and commercial investors who seek uncompromising durability combined with modern aesthetics. The Alpine system distinguishes itself from the competition with a significantly better response to diffused light, which in the Polish climate zone directly translates into a faster return on investment. High cell efficiency combined with certified durability makes these panels the foundation of a safe and predictable micro-installation, while maintaining an excellent appearance on the roof surface.
Ranking
Signals from the data
Hot roofs and southern climates.
Weight-limited structures.
Top 12% of the TOPCon 450-500 W segment, against a median of -0.290.
Bottom 22% of the TOPCon 450-500 W segment, against a median of 52.2.
N-type TOPCon cells exhibit first-year LID degradation below 1% and ≤0.4% annually thereafter, retaining ≥87.4% of nameplate power after 30 years. Older P-type PERC cells degrade at 0.55-0.7% per year, resulting in a cumulative yield difference of several hundred kWh over a 25-year project lifetime for a 435-455 Wp module.
The TC-D designation confirms bifacial cells in a glass-glass encapsulation, eliminating backsheet degradation and boosting mechanical resistance to snow and wind loads. Under typical Polish rooftop conditions (ground albedo 15-25%), bifacial gain is estimated at 5-12% additional energy yield compared to a monofacial module of equivalent front-side wattage.
The highest-power variant (455 Wp) achieves 22.8% module efficiency, matching direct peers Sunlike Solar SKT420~455M10-108D6 (22.8%) and IBC Solar LS-TA2 455 W (22.8%), while outperforming the Waaree ARKA Series (20.93%) by nearly 1.9 percentage points. Higher efficiency directly reduces the roof area needed for a given system capacity.
Horay Solar has appeared on the BloombergNEF Tier 1 PV Module Manufacturer list since Q1 2025 and maintained that status through Q1 2026. This bankability confirmation enables acceptance by project finance institutions and is a prerequisite for many commercial PV project loans and infrastructure funds.
The manufacturer provides a 30-year linear power warranty alongside a 15-year product warranty. The 30-year power guarantee aligns with the benchmark set by leading Tier-1 manufacturers (Trina Vertex S+, JA Solar Deep Blue), supporting long-term LCOE modeling and financial predictability throughout the system's operational life.
Most leading Tier-1 manufacturers in the TOPCon segment (Jinko Solar Tiger Neo, LONGi Hi-MO 6, Trina Vertex S+) offer a 25-year product warranty. The 10-year shortfall may be a deciding factor in commercial installations requiring extended warranty coverage or in bank-financed projects with minimum warranty duration requirements.
- Efficiency of 22.5% matches the TOPCon 450-500W median
- At 225.2 W/m² power density, roof space requirements are typical for TOPCon 450-500W panels
- At -0.28%/°C, hot weather performance is typical for TOPCon 450-500W panels
- Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface
- #4281 for efficiency, #1347 for temperature performance out of 14129 panels
Specifications
Datasheet charts
Measured curves published by Horay Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 450 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Alternatives
Found 1402 panels of the same or similar size to this one, within ±10 mm. See them here Found 1432 panels of the same or similar size to this one, within ±25 mm. See them here Found 3651 panels of the same or similar size to this one, within ±50 mm. See them here Found 3999 panels of the same or similar size to this one, within ±100 mm. See them here
About the HS 186R-108 TC-D Alpine series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.