Space saver, weak in heat
The Hiwatt Solar HW-M10/108G (420-440) series is designed for high efficiency in real rooftop and ground-mounted conditions, even when partial shading, reduced sunlight, or significant temperature fluctuations occur. The use of N-type cells and half-cut technology helps minimize losses and stabilize the module's performance, resulting in more predictable annual energy production. A key feature of this series is MBB and dense inter-cell connections, which improve current flow and support the long-term durability of the structure, which is important in installations exposed to wind and snow loads. For installers and investors, multiple EL inspections for quality control are also important, which reduces the risk of hidden defects and microcracks. This is a good choice for single-family homes, businesses, and prosumer projects, where reliability, high efficiency, and long-term operation are important.
Ranking
Signals from the data
Residential, commercial and shaded-installations.
Hot climates and owners who want a long output guarantee.
Top 8% of the TOPCon 400-450 W segment, against a median of 220.2. Ranked 4,099th in the whole database.
Top 8% of the TOPCon 400-450 W segment, against a median of 51.4. Ranked 1,235th in the whole database.
Bottom 5% of the TOPCon 400-450 W segment, against a median of -0.290. Ranked 8,778th in the whole database.
Bottom 7% of the TOPCon 400-450 W segment, against a median of 30 yrs. Ranked 9,798th in the whole database.
N-type cells carry virtually zero LID/LeTID risk and a better temperature coefficient than legacy PERC (~-0.30%/°C vs. ~-0.35%/°C), meaningfully boosting summer and high-temperature yield. The half-cut architecture combined with multi-busbar (MBB) interconnects reduces resistive losses and improves shade tolerance.
The manufacturer declares multi-step electroluminescence (EL) inspection during production, limiting the risk of micro-cracks and hidden factory defects reaching the installer — particularly relevant when sourcing from less widely recognized brands where production-line QC is difficult to verify independently.
The series carries a 25-year power output warranty, consistent with the N-type TOPCon segment standard and backed by the inherently low degradation of N-type cells. This provides a predictable energy production profile across the full system lifetime.
Built on the M10 (182 mm) wafer format — now the dominant industry standard — the module delivers solid power density (up to 22.02% efficiency) and broad BoS compatibility: racking systems, MPPT inverters, and junction boxes all widely sized for this format.
Hiwatt Solar does not appear on the BloombergNEF Tier-1 module manufacturer list (confirmed in the provided context: tier_1_bankable: false). For commercially financed projects, the absence of bankable status can result in technical due diligence rejection or higher cost of capital. The limitation is largely irrelevant for residential prosumer installs but effectively excludes the series from large-scale tenders and project finance.
Maximum module efficiency is 22.02%, while directly comparable series in the same power range achieve: Luxor ECO LINE N-TYPE TOPCon — 22.86%, Seraphim Nebula — 22.53%, KDM Kingdom Solar — 22.50%. A gap of 0.5–0.84 percentage points translates to measurably lower output per unit of roof area, a material disadvantage on space-constrained installations.
The HW-M10/108G series launched in 2021. Hiwatt Solar has since introduced a successor line, the HW-M10/108H (440–460 W), featuring higher rated power and cell efficiency exceeding 23% (per ENF Solar datasheet data). Buyers should anticipate a shrinking variant selection and a potentially shorter active product support window for this older series.
- At 22.0% efficiency, this panel is on par with typical TOPCon 400-450W modules
- 225.3 W/m² power density - 5.1 W/m² more than TOPCon 400-450W median (220.2 W/m²), more power per roof area
- At -0.34%/°C, loses 0.05pp more power per degree than TOPCon 400-450W median (-0.29%/°C)
- At 20.5 kg, this panel is 1.5 kg lighter than TOPCon 400-450W median (22.0 kg) - easier handling during installation
- In the top 45% for efficiency among all TOPCon panels
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Alternatives
Found 1783 panels of the same or similar size to this one, within ±10 mm. See them here Found 1914 panels of the same or similar size to this one, within ±25 mm. See them here Found 3392 panels of the same or similar size to this one, within ±50 mm. See them here Found 3970 panels of the same or similar size to this one, within ±100 mm. See them here