Skip to main content

HY-NT10/72GDF-590W

590 Wp TOPCon Bifacial 80%
ComparePV verdict

Space saver, no clear weak spot

Rank 3,167 of 14,005
Compare panels Datasheet PDF
Power (Wp)
590
Strong · top 18%
Efficiency (%)
22.80
Strong · top 22%
Density (Wp/m²)
228.4
Strong · top 17%
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
32.1
Typical · median 31.2 kg
Warranty (yrs)
30
Typical · median 30 yrs

The HY-NT10/72GDF HT TOPCon Bifacial series comprises photovoltaic modules engineered for the most demanding operating conditions - designed primarily for marine applications, where standard panels fail to withstand the test of time. Thanks to N-Type TOPCon technology, the cells feature significantly lower light-induced degradation (LID) and excellent performance under low irradiance, ensuring stable energy yields throughout the year, regardless of weather conditions. The bifacial dual-sided design effectively harnesses light reflected from the ground or water surface, tangibly increasing energy production without additional investment costs. SMBB technology with non-destructive cutting reduces internal current losses and minimizes the risk of microcracks, directly translating into a longer module lifespan. A key differentiator of the series is its exceptional resistance to extreme environmental conditions - wind, wave impact, salt fog, UV radiation, and moisture - confirmed by an IP68-rated junction box. The series performs excellently in offshore and coastal installations, as well as in large commercial and industrial ground-mounted farms, where reliability and low levelized cost of energy over decades of operation are essential.

Ranking

1,018 panels in the segment TOPCon 550-600 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.80% 22.44% Strong · top 22% 2,714
Power density 228.4 224.4 Strong · top 17% 2,598
Temperature coefficient -0.290 -0.290 Typical 2,165
Weight per kWp 54.4 53.8 Typical 8,715
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

7 positive · 1 caution
Best for

Utility-scale, commercial and floating.

Strengths
228.4 watts per square metre

Top 17% of the TOPCon 550-600 W segment, against a median of 224.4.

22.80% module efficiency

Top 22% of the TOPCon 550-600 W segment, against a median of 22.44%.

What owners get
22.8–23.6% efficiency: clear lead over peers

The series achieves up to 23.6% module efficiency, compared to just 21.55–21.6% for direct peer comparables (GCL-M12/60GDF, Techwise Summit Series, Seraphim Seco — all rated to 610 Wp). This translates to approximately 8.4% less roof/deck area needed for the same rated power, a critical advantage in marine deployments with constrained mounting surfaces.

N-type TOPCon: low Tcoef & LID immunity

Temperature coefficient of Pmpp is -0.29%/°C versus a typical -0.34 to -0.40%/°C for PERC cells. In Mediterranean climates at 35°C above STC, this yields approximately 1.7% more hourly output compared to a PERC module of equal STC rating. N-type architecture also eliminates light-induced degradation (LID), keeping year-one degradation below 1%.

Marine-certified: IEC 61701 + IP68

The series has passed salt mist testing per IEC 61701 and ammonia resistance per IEC 62716, with an IP68-rated junction box — durability credentials not explicitly declared in peer-comparable datasheets. A bifaciality factor of 80±5% synergizes with water-surface reflectance, generating a realistically achievable 10–25% bifacial gain above a standard land-based installation.

30-year linear power warranty ≥87.4%

The manufacturer guarantees at least 87.4% of nameplate power after 30 years, matching the Jinko Solar Tiger Neo warranty (87.4%/30 yr) and exceeding the standard 25-year performance guarantees of most peer comparables in this power class. For a 1 MWp project, the additional five years of warranty coverage is a meaningful LCOE differentiator.

SMBB 16BB + half-cut cells: lower resistive losses

Super Multi Busbar technology (16 busbars) combined with non-destructive cutting reduces cell series resistance and micro-crack formation during handling and operation — particularly relevant under dynamic mechanical loading (wave motion, vibration) typical of marine and offshore environments. Micro-crack-induced power loss is estimated below 0.5% over the first 10 years.

Trade-offs
BNEF Tier-1 status unconfirmed

GL Solar does not appear in publicly available BNEF Tier-1 module manufacturer rankings (Q1 2026). For commercial projects exceeding 1 MWp seeking non-recourse bank financing, manufacturer bankability is a standard due-diligence requirement. This may create a barrier to entry into large utility-scale and commercial farm markets and could require additional financial guarantees or insurance instruments from the project developer.

Notes from the database
  • Efficiency of 22.8% matches the TOPCon 550-600W median
  • 228.4 W/m² power density - 4.0 W/m² more than TOPCon 550-600W median (224.4 W/m²), more power per roof area
  • At -0.29%/°C, hot weather performance is typical for TOPCon 550-600W panels
  • Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface
  • #2714 for efficiency, #2165 for temperature performance out of 14005 panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 590 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.80 % Strong Segment median 22.44%
Vmpp · Impp 44.15 V · 13.37 A Operating point at max power
Voc · Isc 52.20 V · 14.13 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2278×1134×30 mm · 2.58 m² of roof
Weight 32.1 kg Typical Typical · median 31.2 kg
Cells 144 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.240 · 0.043 %/°C
NOCT 42 °C At 800 W/m², 20 °C ambient
Product warranty 15 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 516 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by GL Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 590 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
GL Solar HY-NT10/72GDF-590W 590 W 22.80% -0.290 32.1 kg You are here
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg -30 W, lighter, +2.0 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg +50 W, lighter, +2.0 pp
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg -35 W, lighter, +1.8 pp
AIKO-A635-MAE72Mw 635 W 24.60% -0.260 27.0 kg +45 W, lighter, +1.8 pp
AIKO-A630-MAH72Dw 630 W 24.40% -0.260 32.5 kg +40 W, cooler, +1.6 pp
LR7-60HVHL-550M 550 W 24.40% -0.260 16.3 kg -40 W, 16 kg lighter, +1.6 pp
HY-NT10/72GDF-595W 595 W 23.00% -0.290 32.1 kg Very close match
HY-NT10/72GDF-600W 600 W 23.20% -0.290 32.1 kg +10 W, +0.4 pp
HY-NT10/72GDF-605W 605 W 23.40% -0.290 32.1 kg +15 W, +0.6 pp
HY-NT10/72GDF-610W 610 W 23.60% -0.290 32.1 kg +20 W, +0.8 pp
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +60 W, lighter, +2.4 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg +55 W, lighter, +2.2 pp

Found 2326 panels of the same or similar size to this one, within ±10 mm. See them here Found 2368 panels of the same or similar size to this one, within ±25 mm. See them here Found 2382 panels of the same or similar size to this one, within ±50 mm. See them here Found 2547 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What warranty does the GL Solar HY-NT10/72GDF series come with?
GL Solar provides a 15-year product warranty covering manufacturing defects and a 30-year power output warranty guaranteeing at least 87.4% of rated power over three decades of operation. This is among the strongest warranty terms in the industrial PV module segment and reflects the long-term stability inherent to N-Type TOPCon cell technology.
Are GL Solar HY-NT10/72GDF panels truly suitable for marine and offshore installations?
Yes. The marine-grade variant of the HY-NT10/72GDF series features an IP68-rated junction box, providing full dust-tight protection and resistance to prolonged water immersion. The modules have been tested for salt mist corrosion, intense UV exposure, and dynamic wind and wave loads, complying with IEC 61215 and IEC 61730 standards.
What is the maximum power output and efficiency of the GL Solar HY-NT10/72GDF panel?
The top model in the series reaches 610 Wp peak power with module efficiency up to 23.6%. Each module contains 144 monocrystalline cells in a 6×24 configuration, measuring approximately 2279×1134×30 mm and weighing 32.1 kg. This high power density is made possible by N-Type TOPCon technology combined with a multi-busbar SMBB cell design.
How does the N-Type TOPCon technology in the HY-NT10/72GDF series compare to standard PERC cells?
N-Type TOPCon cells exhibit significantly lower light-induced degradation (LID) compared to P-Type PERC cells, resulting in more stable energy output throughout the warranty period and superior low-irradiance performance. The temperature coefficient of Pmax is only -0.29%/°C, meaning the panels retain more power on hot days relative to typical PERC modules.
What real-world benefit does the bifacial design of the GL Solar HY-NT10/72GDF offer, and when does it make sense?
The bifacial design, with a bifaciality factor up to 80±5%, allows the rear side of each module to harvest light reflected from the ground, water surface, or light-colored substrates. Typical energy yield gains range from 5–15% depending on the albedo of the surroundings. The effect is most pronounced in marine installations, over white gravel, or snow-covered ground, with no additional capital investment required.
Is the GL Solar HY-NT10/72GDF series a good fit for large utility-scale ground-mount solar farms?
Yes. The high per-module power of up to 610 Wp and low temperature coefficient result in a competitive LCOE for utility-scale projects. The large 144-cell format reduces the number of string connections and lowers overall BoS costs. The series carries IEC 61215 and IEC 61730 certifications, meeting the bankability requirements of most project finance institutions.
Add to compare