Skip to main content
FuturaSun FU 190 M Silk Pro

FuturaSun FU 190 M Silk Pro

190 Wp PERC
ComparePV verdict

Strong in heat, needs the roof space

Rank 14,131 of 14,354
Compare panels Datasheet PDF
Power (Wp)
190
Strong · top 20%
Efficiency (%)
14.96
Weak · bottom 13%
Density (Wp/m²)
148.8
Weak · bottom 10%
Temp (%/°C)
-0.350
Strong · top 1%
Weight (kg)
14.0
Typical · median 11.3 kg
Warranty (yrs)
25
Typical · median 25 yrs

The 68-cell version of the Silk Pro series is FuturaSun's answer to a very practical problem: how do you replace a single damaged or stolen module in an existing array when the original panels, built around narrow 5-inch cells, have long been discontinued. This is a revamping series, engineered from the ground up for electrical and mechanical compatibility with older installations - with a module current of roughly 5 amps, the panel can be slotted into an existing string without rebuilding the whole array or swapping out the inverter. It uses half-cut PERC cells in M6 format with multi-busbar design, delivering stable performance and reduced losses from partial shading, a common scenario when replacing just one module. The narrow, elongated form factor, matched to older panel dimensions, along with the silver frame and white backsheet, keeps the roof looking visually consistent rather than showing an obvious mismatch between old and new modules. The series is backed by a 25-year performance warranty and a 15-year product warranty, with design and quality overseen by FuturaSun's Italian headquarters. It is a dedicated solution for installers, service technicians, and owners of older PV systems who need a fast, predictable repair without technical compromises.

Ranking

63 panels in the segment PERC 150-200 W
Metric This panel Median Position in segment Overall rank
Module efficiency 14.96% 16.40% Weak · bottom 13% 14,153
Power density 148.8 161.8 Weak · bottom 10% 14,153
Temperature coefficient -0.350 -0.370 Strong · top 1% 10,660
Weight per kWp 73.7 68.5 Typical 13,902
Performance warranty 25 yrs 25 yrs Typical 10,073
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

6 positive · 5 caution
Best for

Residential and shaded-installations.

Not ideal for

Roofs where every square metre has to count and tight roof space.

Strengths
-0.350 %/°C temperature coefficient

Top 1% of the PERC 150-200 W segment, against a median of -0.370. Ranked 10,660th in the whole database.

Watch-outs
148.8 watts per square metre

Bottom 10% of the PERC 150-200 W segment, against a median of 161.8.

14.96% module efficiency

Bottom 13% of the PERC 150-200 W segment, against a median of 16.40%.

What owners get
Purpose-built repowering compatibility

A module current of around 5 A allows a single damaged or stolen panel in an older array to be replaced without rebuilding the entire string or swapping the inverter - a niche capability rarely found in standard PV series.

Half-cut PERC M6 cells with multiple busbars

Half-cut cell design limits power losses under partial shading, which matters when a new module is mixed into a string alongside older panels with a non-uniform performance profile.

25-year power warranty and 15-year product warranty

The warranty terms (25 years on power, 15 years on product) match the standard offered by most tier-1 manufacturers, despite the series targeting a niche repair segment rather than new installations.

Visual consistency with existing installations

The narrow, elongated format resembling older-generation panels, combined with a silver frame and white backsheet, avoids visible mismatches between the new module and legacy panels on the roof.

Quality oversight from FuturaSun's Italian HQ

Design and quality control are managed by the Italy-based manufacturer (founded in 2008), offering more predictable after-sales support than anonymous aftermarket replacements.

Trade-offs
Discontinued production, limited availability

This Silk Pro variant was manufactured between 2020 and 2022 and is now discontinued, meaning limited access to new units, spare parts, and long-term service support.

Low efficiency versus comparable 200 Wp models

Efficiency of 14.96-15.74% is significantly lower than comparable modules rated up to 200 Wp, such as Gamko New Energy GKA182M (23%) or Isola New Energy 210M Split Cell (20.16%) - the gap reflects a design tailored to legacy form factors rather than modern cell architecture.

Low unit power limits use to repair scenarios

The 190-200 Wp power range is unsuitable for new installations - the module only makes sense as a drop-in replacement within an existing, electrically compatible string, not as a standalone product for new builds.

Notes from the database
  • Module efficiency of 15.0% is 4.5pp below average for PERC 0-400W panels (median: 19.4%)
  • Power density of 148.8 W/m² is 45.4 W/m² below PERC 0-400W median (194.2 W/m²) - needs more roof space
  • Temperature coefficient of -0.35%/°C matches the PERC 0-400W median
  • Weight of 14.0 kg (6.5 kg below PERC 0-400W median of 20.5 kg) allows easier transport and roof mounting
  • #14153 for efficiency, #10660 for temperature performance out of 14354 panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 190 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 14.96 % Weak Segment median 16.40%
Vmpp · Impp 38.17 V · 4.98 A Operating point at max power
Voc · Isc 45.41 V · 5.34 A Sizes the string length
Max system voltage 1000 V Longer strings than 1000 V modules
Dimensions 1580×808×35 mm · 1.28 m² of roof
Weight 14.0 kg Typical Typical · median 11.3 kg
Cells 68 · PERC Monocrystalline
Coefficient Pmax -0.350 %/°C Strong top 1% of its segment
Coefficient Voc · Isc -0.270 · 0.050 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 15 years Hardware defects only
Performance warranty 25 years Typical median 25 yrs · median 25 yrs
End-of-warranty output 87.0 % Equals 157 W guaranteed
Degradation 3.00 → 0.50 % First year, then annual

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.350 %/°C against a segment median of -0.370
-
Filter these
Size
Panel Power Eff. Temp. Weight Difference
FuturaSun FU 190 M Silk Pro 190 W 14.96% -0.350 14.0 kg You are here
GKA182M150W 150 W 23.00% - 9.0 kg Lighter, +8.0 pp, +5 yr warranty
GKA182M160W 160 W 23.00% - 9.0 kg Lighter, +8.0 pp, +5 yr warranty
GKA182M180W 180 W 23.00% - 9.0 kg Lighter, +8.0 pp, +5 yr warranty
GKA182M200W 200 W 23.00% - 9.0 kg Lighter, +8.0 pp, +5 yr warranty
GKA182M240W 240 W 23.00% - 10.8 kg +50 W, +8.0 pp, +5 yr warranty
NS-220MH-80 220 W 22.06% -0.290 10.5 kg Cooler, lighter, +7.1 pp
NS-220MH-80 220 W 22.06% -0.290 10.5 kg Cooler, lighter, +7.1 pp
NS-210MH-80 210 W 21.06% -0.290 10.5 kg Cooler, lighter, +6.1 pp
NS-210MH-80 210 W 21.06% -0.290 10.5 kg Cooler, lighter, +6.1 pp
RS7E-230M 230 W 21.06% -0.390 12.0 kg Hotter, +6.1 pp, +5 yr warranty
FU 200 M Silk Pro 200 W 15.74% -0.350 14.0 kg +10 W, +0.8 pp
ZEUS 1.2 FullBlack 280W 280 W 23.31% -0.260 14.3 kg +90 W, cooler, +8.3 pp
ZEUS 3.2 285WP FullBlack 285 W 23.14% -0.260 15.6 kg +95 W, cooler, +8.2 pp
GKA182M285W 285 W 23.00% - 10.8 kg +95 W, +8.0 pp, +5 yr warranty
GKA182M260W 260 W 23.00% - 10.8 kg +70 W, +8.0 pp, +5 yr warranty
GKA182M270W 270 W 23.00% - 10.8 kg +80 W, +8.0 pp, +5 yr warranty

Found 22 panels of the same or similar size to this one, within ±10 mm. See them here Found 22 panels of the same or similar size to this one, within ±25 mm. See them here Found 38 panels of the same or similar size to this one, within ±50 mm. See them here Found 48 panels of the same or similar size to this one, within ±100 mm. See them here

About the Silk Pro series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

Is the FuturaSun Silk Pro 68-cell panel still available for purchase?
The 68-cell Silk Pro series has been discontinued by FuturaSun. Modules may still be available from distributors as remaining stock, so it's worth checking current availability with your supplier before buying. This panel was designed specifically for service replacements in older installations, so its supply is limited and it is no longer in active production.
Can I replace a single damaged panel in an old installation with a FuturaSun Silk Pro?
Yes, that is the main purpose of this series. The module has a current of around 5 amps, so it can be wired into an existing string without rebuilding the whole chain or changing the inverter. Its narrow, elongated format echoes older panels built with 5-inch cells, allowing a stolen or damaged module to be replaced without disrupting the rest of the array.
What is the maximum power output of the 68-cell Silk Pro panel?
The module reaches a maximum power of around 200 Wp. This value is intentionally close to older panels with narrow cells, since the panel is meant to replace a damaged unit in an existing string without significant mismatch in energy output between modules on the same string.
What warranty comes with FuturaSun Silk Pro panels?
The series carries a 25-year power warranty and a 15-year product warranty. Even though the module is designed to replace older panels that may no longer have active coverage, the new component itself benefits from FuturaSun's standard long-term warranty terms, overseen by the manufacturer's Italian headquarters.
Do the half-cut PERC cells in the Silk Pro reduce losses from partial shading?
Yes, the panel uses half-cut PERC cells based on M6 technology with multiple busbars. This design splits each cell into smaller segments, so shading on one segment has less impact on the panel as a whole. This matters for single-module replacements, where neighboring older panels may operate under different conditions.
Will a new Silk Pro panel visually match older modules already on the roof?
Yes, thanks to its silver frame, white backsheet, and narrow, elongated design similar to older panel formats, the new module blends visually with an existing installation. This means that after replacing a single panel, there's no noticeable color or size mismatch between the old and new modules on the roof.
Add to compare