Light for its output, weak in heat
The Einnova Solarline TOPCon N-type Mono-crystalline series represents a technological breakthrough in this manufacturer's range, focusing on maximizing yields per unit area. The use of advanced N-type cell technology eliminates the problem of light-induced degradation (LID), which directly translates to higher module efficiency throughout their entire life cycle. These panels perform excellently in challenging lighting conditions, offering outstanding performance in low sunlight and a low temperature coefficient. As a result, the system operates stably even during summer heatwaves, delivering more energy than standard P-type solutions. The module design based on the TOPCon structure minimizes recombination losses, making them an ideal choice for investors seeking the highest durability and a fast return on investment. It is a solution dedicated to both modern residential micro-installations and demanding commercial projects where reducing operating costs is key. Compared to the competition, Einnova Solarline stands out with an excellent quality-to-price ratio and a longer linear power warranty, providing users with energy security for decades. This is a solid investment in trouble-free premium technology that sets new standards in the Polish renewable energy sector.
Ranking
Signals from the data
Residential, commercial, utility-scale and hot-climate.
Hot climates.
Top 21% of the TOPCon 550-600 W segment, against a median of 53.8.
Bottom 10% of the TOPCon 550-600 W segment, against a median of -0.290.
The peak efficiency of 23.21% is virtually on par with Tongwei TWMND (23.2%) and Lexron TOPCon (23.23%), and exceeds the Talesun BISTAR by more than 1.7 percentage points (21.5%). For rooftop installations, this translates into a smaller required array footprint for the same peak power output.
N-type cells exhibit an annual degradation rate of 0.4–0.5% compared to 0.6–0.8% for PERC, with first-year degradation of ~1% versus ~2%. The elimination of LID and LeTID results in meaningfully higher cumulative energy yield over the full 30-year operational lifetime.
The manufacturer provides a 30-year warranty covering both the product and linear power degradation — exceeding the market standard, where most manufacturers (JA Solar, Trina Solar) offer 25 years. The extended warranty horizon directly reduces financing risk for projects with long payback cycles.
The 600 Wp format reduces the module count in a given installation — a 10 kWp system requires only 17 modules instead of ~25 with 400 Wp panels. Fewer modules translate into lower BoS costs (wiring, mounting hardware, MC4 connectors), with estimated savings of 8–12% compared to sub-500 W formats.
TOPCon N-type cells achieve a temperature coefficient in the range of −0.29% to −0.32%/°C, versus a typical −0.34%/°C for PERC. When module temperature reaches 65°C in summer, this corresponds to approximately 1.5 percentage points higher relative power output compared to a PERC module of the same power class — a meaningful advantage under Polish summer conditions.
The series does not offer a bifacial variant, whereas the direct competitor Tongwei TWMND 580–600 W combines 23.2% efficiency with a bifacial design that generates an additional 10–25% energy from ground-reflected irradiance in utility-scale installations. For ground-mounted PV farms and flat rooftops with light-colored membranes, the absence of a bifacial option significantly increases the LCOE per kWh.
Einnova Solarline does not appear on the BNEF Tier 1 list (as of Q1 2026), while peer manufacturer Tongwei holds that designation. The absence of Tier 1 status may complicate securing non-recourse project financing for installations above 1 MW and limit acceptance by certain project insurers and development finance institutions.
- Efficiency of 22.4% matches the TOPCon 550-600W median
- At 224.4 W/m² power density, roof space requirements are typical for TOPCon 550-600W panels
- At -0.31%/°C, loses 0.02pp more power per degree than TOPCon 550-600W median (-0.29%/°C)
- At 28.0 kg, this panel is 3.2 kg lighter than TOPCon 550-600W median (31.2 kg) - easier handling during installation
- In the top 34% for efficiency among all TOPCon panels
Specifications
Datasheet charts
Measured curves published by Einnova Solarline in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 580 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Alternatives
Found 2326 panels of the same or similar size to this one, within ±10 mm. See them here Found 2368 panels of the same or similar size to this one, within ±25 mm. See them here Found 2382 panels of the same or similar size to this one, within ±50 mm. See them here Found 2542 panels of the same or similar size to this one, within ±100 mm. See them here