Solid all-round for its segment
The Ecodelta Classic Plus series redefines efficiency standards through the use of innovative shingled technology, which eliminates traditional ribbon connections between cells. By overlapping the edges of silicon wafers, these panels offer a significantly larger active surface area, which directly translates into maximum utilization of available roof space. This is an ideal solution for investors struggling with limited installation space who do not want to sacrifice high energy yields. This construction is characterized by exceptional resistance to micro-cracks and mechanical loads, which guarantees longevity and stable system operation for decades. Eliminating busbars not only affects aesthetics, providing an elegant, uniform appearance, but also improves efficiency in partial shading conditions. Ecodelta Classic Plus stands out from the competition with a reduced risk of hot-spots, which increases the fire safety of the entire installation. This series is dedicated especially to modern residential construction, where a combination of high power density and attention to visual details matters. By choosing these modules, the user receives a product optimized for operation in the variable Polish climate, ensuring predictable savings with minimal operating costs.
Ranking
Signals from the data
N-type cells exhibit virtually zero light-induced degradation (LID) and full immunity to LeTID — failure modes that plague P-type PERC modules. The temperature coefficient of -0.29%/°C outperforms the TOPCon median (~-0.31%/°C) and significantly beats PERC (~-0.35%/°C). At the cell operating temperatures typical of Polish summers (45–50°C), this translates to approximately 0.9–1.5% higher energy yield compared to previous-generation technology.
The manufacturer guarantees a minimum power retention of 87.4% of nominal output after 30 years. By comparison, Tier-1 manufacturers such as Trina Solar and JA Solar typically offer a linear warranty up to 25 years with 84.8% retention, with only select series extending to 30 years. The longer warranty horizon directly improves LCOE projections in both residential prosumer and commercial investment analyses.
Eliminating soldering ribbons and overlapping cells in a shingled configuration increases the module's active area and reduces partial-shading losses by up to 35% compared to conventional half-cut modules (Eco Delta Power data). The absence of busbars also lowers the risk of hot-spot formation — particularly relevant for rooftop installations near chimneys or dormer windows.
TOPCon bifacial modules achieve a bifaciality factor of approximately 76%, exceeding the ~75% typical of bifacial PERC. At ground albedo values of 20–25% common in Poland, this delivers an additional annual energy yield of 5–15% with no increase in installation cost.
The peak efficiency of 22.54% is effectively equivalent to the Suntech Ultra V Pro (22.5%) in the same 440–450 Wp power class, placing the Classic Plus series in the top quartile of available residential modules and enabling full utilization of constrained roof area.
The SunKean/Sunket New Energy SKT430–450M10-108D5 achieves 23.04% efficiency at the same 450 Wp rating, representing a 0.5 pp advantage over the Classic Plus (22.54%). On a 10-module installation (approximately 18 m² of roof area), this difference equates to roughly 50 Wp less installed capacity — a meaningful gap where roof space is severely constrained.
Eco Delta Power Co., Ltd. — the Chinese manufacturer of the physical Classic Plus modules — does not appear on the BNEF Tier-1 Q1 2026 list, which is required for many commercial project financing arrangements. For residential prosumer installations this limitation is negligible, but it may represent a barrier for large C&I projects where bankability is a prerequisite.
- Efficiency of 22.3% matches the TOPCon 400-450W median
- At 222.7 W/m² power density, roof space requirements are typical for TOPCon 400-450W panels
- Temperature coefficient of -0.29%/°C matches the TOPCon 400-450W median
- In the top 39% for efficiency among all TOPCon panels
Specifications
Datasheet charts
Measured curves published by ECODELTA in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 445 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Found 1395 panels of the same or similar size to this one, within ±10 mm. See them here Found 1425 panels of the same or similar size to this one, within ±25 mm. See them here Found 3614 panels of the same or similar size to this one, within ±50 mm. See them here Found 3962 panels of the same or similar size to this one, within ±100 mm. See them here