Skip to main content

DHN-48Z16/DG(RR)-390W

390 Wp TOPCon Bifacial 80%
ComparePV verdict

Efficiency leader, no clear weak spot

Rank 11,005 of 14,005
Compare panels Datasheet PDF
Power (Wp)
390
Strong · top 24%
Efficiency (%)
19.52
Strong · top 24%
Density (Wp/m²)
195.2
Strong · top 24%
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
23.9
Typical · median 26.0 kg
Warranty (yrs)
30
Typical · median 30 yrs

The DAH DHN-48Z16/DG(RR) series, with a power output of 380-400W, is designed for modern installations where both performance and aesthetics are important. These are bifacial modules with double glazing, which allows them to better withstand mechanical loads and maintain stable parameters for longer, even in harsh conditions. The use of N-type TOPCon cells helps to minimize losses and supports high productivity, even in situations with lower sunlight and higher temperatures.

A key feature of this series is the durable color-protecting coatings, which make it easy to match the panels to the aesthetics of the roof or facade without compromising performance. In practice, this solves a common problem for investors: how to combine architectural requirements with the real cost-effectiveness of the installation.

This is a good choice for single-family homes, commercial buildings, and BIPV projects - from roofs to facades, railings, or canopies, where the dual-sided and robust construction provides an advantage.

Ranking

112 panels in the segment TOPCon 350-400 W
Metric This panel Median Position in segment Overall rank
Module efficiency 19.52% 18.20% Strong · top 24% 12,656
Power density 195.2 181.8 Strong · top 24% 12,644
Temperature coefficient -0.290 -0.290 Typical 2,165
Weight per kWp 61.3 68.9 Typical 12,623
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

7 positive · 2 caution
Best for

Residential, commercial and BIPV.

Strengths
19.52% module efficiency

Top 24% of the TOPCon 350-400 W segment, against a median of 18.20%.

195.2 watts per square metre

Top 24% of the TOPCon 350-400 W segment, against a median of 181.8.

What owners get
Low Temperature Coefficient of -0.29%/°C

N-type TOPCon technology delivers a Pmax temperature coefficient of -0.29%/°C, compared to -0.35%/°C typical of standard PERC cells. This ~17% improvement translates into meaningfully higher energy yield during summer months, when module temperatures routinely exceed 50°C.

30-Year Power Warranty (87.4%)

The manufacturer guarantees ≥89.4% of rated power after 25 years and ≥87.4% after 30 years, surpassing the industry standard — most competitors, including the DMEGC GH400M10T, offer 25-year warranties with ~84.8% retention. The extended warranty horizon reduces financial risk for projects with CAPEX amortized over multiple decades.

Bifacial with 80% Bifaciality Factor

A bifaciality factor of 80% (confirmed in the ENF datasheet) enables a real-world energy yield gain of 10–20% under favorable albedo conditions (light-colored substrate, snow, gravel). The glass-glass construction additionally eliminates LeTID risk and extends the module's mechanical service life.

BNEF Tier 1 — Bankability Confirmed

DAH Solar has maintained continuous BloombergNEF Tier 1 status in Q1 and Q3 2025, confirming its ability to support project finance and reducing counterparty risk in long-term procurement agreements.

Efficiency 19.02–20.02% vs. Peer Comparables

Peak efficiency of 20.02% substantially outperforms the comparable DMEGC GH400M10T-B48HST (15.48%) and is on par with the Solaria PowerXT (20.2%) at the same 400 Wp rating, enabling a smaller installation footprint for equivalent energy output.

Trade-offs
Weight of 23.9 kg — Heavier Than Monofacial Modules

The glass-glass construction raises module weight to 23.9 kg, approximately 3–4 kg more than typical single-glass frameless monofacial modules (~20–21 kg). Retrofits on existing rooftops may require an additional structural load analysis, particularly for large-scale BIPV installations.

Niche Product (BIPV) — Limited Availability

The DHN-48Z16/DG(RR) series is a colored variant designed specifically for architectural and BIPV applications, resulting in narrower distribution and potentially longer lead times compared to standard black/white variants on the same platform (e.g., DHN-48Z16-DG(BW)), which are stocked by a broader network of distributors.

Notes from the database
  • At 19.5% efficiency, this panel is 3.5pp above typical TOPCon 0-400W modules (median: 16.0%)
  • Power density of 195.2 W/m² packs 35.4 W/m² more into the same footprint vs TOPCon 0-400W median (159.8 W/m²)
  • Temperature coefficient of -0.29%/°C matches the TOPCon 0-400W median
  • Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface
  • Ranked #12656 out of 14005 panels for efficiency in the database

Specifications

Open datasheet PDF
Nominal power (Pmax) 390 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 19.52 % Strong Segment median 18.20%
Vmpp · Impp 30.41 V · 12.83 A Operating point at max power
Voc · Isc 35.29 V · 13.26 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 1762×1134×30 mm · 2.00 m² of roof
Weight 23.9 kg Typical Typical · median 26.0 kg
Cells 96 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.046 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 25 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 341 W guaranteed
Degradation 1.00 % First year

Datasheet charts

Open datasheet PDF

Measured curves published by DAH Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 390 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
DAH Solar DHN-48Z16/DG(RR)-390W 390 W 19.52% -0.290 23.9 kg You are here
LX-440M/182-108+GG 440 W 23.07% -0.240 23.6 kg +50 W, cooler, +3.6 pp
GKA210M340W 340 W 23.00% - 16.2 kg -50 W, lighter, +3.5 pp
GKA210M360W 360 W 23.00% - 16.2 kg -30 W, lighter, +3.5 pp
GKA210M380W (1/4*4*38) 380 W 23.00% - 17.1 kg -10 W, lighter, +3.5 pp
GKA210M400W (1/2*4*20) 400 W 23.00% - 18.0 kg +10 W, lighter, +3.5 pp
GKA210M400W (1/4*4*40) 400 W 23.00% - 18.0 kg +10 W, lighter, +3.5 pp
GKA210M380W (1/2*4*19) 380 W 23.00% - 17.1 kg -10 W, lighter, +3.5 pp
JT440SYK(B) 440 W 22.90% -0.240 23.0 kg +50 W, cooler, +3.4 pp
DHN-48Z16/DG(RR)-380W 380 W 19.02% -0.290 23.9 kg -10 W, -0.5 pp
DHN-48Z16/DG(RR)-385W 385 W 19.27% -0.290 23.9 kg -0.2 pp
DHN-48Z16/DG(RR)-395W 395 W 19.77% -0.290 23.9 kg +0.2 pp
DHN-48Z16/DG(RR)-400W 400 W 20.02% -0.290 23.9 kg +10 W, +0.5 pp
LR7-54HJD-510M 510 W 25.00% -0.240 23.5 kg +120 W, cooler, +5.5 pp
AIKO-A495-MCE54Mw 495 W 24.80% -0.260 21.0 kg +105 W, cooler, +5.3 pp
LR7-54HJD-505M 505 W 24.70% -0.240 23.5 kg +115 W, cooler, +5.2 pp
AIKO-A490-MCE54Mw 490 W 24.50% -0.260 21.0 kg +100 W, cooler, +5.0 pp

Found 1395 panels of the same or similar size to this one, within ±10 mm. See them here Found 1425 panels of the same or similar size to this one, within ±25 mm. See them here Found 3614 panels of the same or similar size to this one, within ±50 mm. See them here Found 3962 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What warranty is offered on the DAH Solar DHN-48Z16/DG(RR) 380–400W panels?
The DHN-48Z16/DG(RR) series is covered by a 25-year product warranty from the manufacturer and a 30-year linear power output warranty. After 30 years of operation, the manufacturer guarantees that the module will retain at least 87.4% of its nominal power output. This is one of the longest power warranties available in the photovoltaic panel market, reflecting DAH Solar's confidence in the durability of the dual-glass construction and N-type TOPCon cell technology used in this series.
Does the TOPCon technology in the DAH DHN-48Z16/DG(RR) panels actually translate into higher energy yield?
Yes. N-type TOPCon cells feature a lower temperature coefficient of -0.29%/°C, which means reduced power losses on hot days compared to the more widely used PERC cells. Additionally, this technology exhibits greater resistance to light-induced degradation (LID), allowing the DHN-48Z16/DG(RR) module to maintain higher productivity throughout the entire system lifetime. The panel achieves an efficiency of up to 20.02%.
What does the RR designation in the DAH DHN-48Z16/DG(RR) series name indicate, and does such a panel differ in performance from the standard version?
The RR designation refers to the module's colored coating (in a red-brick shade), designed for installations where aesthetics matter — such as rooftops, façades, or BIPV applications. The electrical parameters, including maximum power output of up to 400 Wp and efficiency of up to 20.02%, remain identical to those of the standard versions in the series. The colored coating affects only the appearance of the panel, not its energy performance.
Is the DAH DHN-48Z16/DG(RR) 400W panel suitable for BIPV installation on a façade or balcony?
Yes, the DHN-48Z16/DG(RR) series is explicitly designed for BIPV applications. The glass-glass construction provides resistance to mechanical loads and moisture ingress, which is critical for vertical mounting on façades, balustrades, and canopies. The module's bifacial operation allows it to additionally harvest energy from reflected irradiance — for example, from building walls or ground surfaces — which is a particular advantage in vertical installations.
How much does the DAH Solar DHN-48Z16/DG(RR) panel weigh, and can a typical roof structure support such an installation?
The DHN-48Z16/DG(RR) module weighs approximately 23.9 kg with dimensions of 1762×1134×30 mm. It is somewhat heavier than standard single-glass panels, owing to its dual-glass construction. Prior to installation, it is advisable to have the load-bearing capacity of the roof assessed by a licensed structural engineer, particularly for older buildings or timber roof structures. Modern residential installations typically have no difficulty supporting this level of load.
Do the DAH DHN-48Z16/DG(RR) panels perform well in winter and under low-irradiance conditions?
Yes. N-type TOPCon cells exhibit better low-light responsiveness compared to P-type PERC cells, resulting in higher energy yield on overcast days and during the winter months. The low temperature coefficient (-0.29%/°C) also means that in cold, sunny conditions the module can momentarily produce slightly above its nominal power of 400 Wp, since cold cells operate more efficiently than overheated ones.
Add to compare