Middle of its segment, heavy for its output
The AE Solar METEOR (AE CMD-108BDS) series are modules designed for real operating conditions in Poland - where stable energy output, even under cloudy skies, fog, and low light angles, is crucial. The use of N-type TOPCon cells helps to minimize energy losses and maintain high efficiency over a wider range of conditions, not just in ideal sunlight. The bifacial design allows for the utilization of reflected light from the ground, which is important, for example, on bright roofs, membranes, gravel, or in ground-mounted installations.
The AE CMD-108BDS model also features double-glass, which increases resistance to moisture, temperature changes, and long-term environmental exposure, while also supporting the longevity of the module. Thanks to half-cut cells, the panel better handles partial shading and reduces the risk of yield drops in more complex roof configurations. This is a sensible choice for homes, businesses, and projects where durability, predictable performance, and high output are priorities.
Ranking
Signals from the data
Residential, commercial and shaded-installations.
Weight-limited structures and tight roof space.
Bottom 23% of the TOPCon 400-450 W segment, against a median of 51.5.
Bottom 25% of the TOPCon 400-450 W segment, against a median of 22.00%.
AE Solar has been ranked in the BNEF Tier-1 ranking for the 16th consecutive quarter (Q1 2025) and is the only European manufacturer featured in the BNEF 2024 bankability study. The bankability index has increased from 26% (2023) to 50% (2024), which has a direct impact on projects that involve bank or leasing financing.
The efficiency of -0.29%/°C (Pmax) places the METEOR module significantly above older PERC modules (-0.35%/°C). At a typical module temperature of 55°C in Poland during the summer, the loss is approximately 8.7% compared to 10.5% for PERC - resulting in a real, higher summer gain without any changes to the installation.
Both the product and performance warranties are 30 years long - 5 years longer than the industry standard of 25 years (used by companies such as Trina Solar and JA Solar). The manufacturer guarantees >87% of the nominal power output after 30 years, which reduces the residual risk for the installer.
Double-pane glass (2+2 mm) eliminates the risk of PID degradation and provides environmental protection to Class C2/salt mist/ammonia. The combination of bifacial + half-cut technology minimizes losses in partially shaded conditions and allows for the recovery of 5-15% additional energy from reflected light (e.g., from roofs, membranes, gravel, and soil).
Among direct peer comparisons, METEOR (22.57%) outperforms KDM SERIES (22.5%) and Lina Energy LEPV 132 ULTRA PREMIUM (22.37%), only slightly trailing Luxor ECO LINE NON-REFLECT (22.86%). The high power density allows for 440 Wp per 108 cells in a format of 1721 × 1133 mm.
The double-glass construction increases the module's weight to 23.5 kg, while comparable glass-transparent backsheet modules (e.g., Lina Energy LEPV 132) weigh approximately 20-21 kg. When installing 10 kWp (~23 modules), the total roof load increases by approximately 57-69 kg - this may require additional static assessment for older roof structures.
The Luxor Solar ECO LINE N-TYPE TOPCON NON-REFLECT solar panel achieves an efficiency of 22.86% at the same maximum power output of 440 Wp, which represents a 0.29% advantage over the METEOR (22.57%). In practice, this difference is marginal, but it can be significant in installations with limited roof space.
- At 21.5% efficiency, this panel is on par with typical TOPCon 400-450W modules
- 215.4 W/m² power density is 4.8 W/m² below TOPCon 400-450W median (220.2 W/m²) - requires larger installation area
- Temperature coefficient of -0.29%/°C matches the TOPCon 400-450W median
- At 23.5 kg (1.5 kg above TOPCon 400-450W median of 22.0 kg), requires checking roof load capacity
- 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Found 1797 panels of the same or similar size to this one, within ±10 mm. See them here Found 1928 panels of the same or similar size to this one, within ±25 mm. See them here Found 3413 panels of the same or similar size to this one, within ±50 mm. See them here Found 4015 panels of the same or similar size to this one, within ±100 mm. See them here
About the METEOR (AE CMD-108BDS) series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.