Skip to main content
AE Solar AE CMEQ-48BDS-475

AE Solar AE CMEQ-48BDS-475

475 Wp TOPCon Bifacial 85%
ComparePV verdict

Space saver, no clear weak spot

Rank 6,074 of 14,354
Compare panels Datasheet PDF
Power (Wp)
475
Typical for its class
Efficiency (%)
23.77
Strong · top 4%
Density (Wp/m²)
237.9
Strong · top 3%
Temp (%/°C)
-0.260
Strong · top 4%
Weight (kg)
24.0
Typical · median 24.0 kg
Warranty (yrs)
30
Typical · median 30 yrs

The METEOR III series brings a new generation of quarter-cut cells to the AE Solar lineup, splitting each cell into four sections instead of the usual half-cut design, which reduces resistive losses and improves current distribution across the module. The new-generation n-Type TOPCon technology delivers better performance under low-light conditions and a lower power temperature coefficient than classic p-Type PERC cells, meaning the panel loses less output on hot days. Built as a bifacial double-glass module, it captures additional reflected light from the ground, boosting energy yield without increasing the installation footprint. This makes it especially appealing to investors focused on a lower LCOE over the long run, since the glass-on-glass design limits degradation and improves mechanical resistance to snow and wind loads. METEOR III also stands out with an exceptionally long 30-year power warranty, well above market standard, translating into real investment security across the full service life of the installation. The series fits both commercial projects and large prosumer installations where component quality matters, backed by Tier 1 certification and the manufacturer's German quality control standards.

Ranking

1,125 panels in the segment TOPCon 450-500 W
Metric This panel Median Position in segment Overall rank
Module efficiency 23.77% 22.52% Strong · top 4% 586
Power density 237.9 225.2 Strong · top 3% 547
Temperature coefficient -0.260 -0.290 Strong · top 4% 521
Weight per kWp 50.5 52.2 Typical 3,958
Performance warranty 30 yrs 30 yrs Typical 31
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

8 positive · 1 caution
Best for

Commercial and residential.

Strengths
237.9 watts per square metre

Top 3% of the TOPCon 450-500 W segment, against a median of 225.2. Ranked 547th in the whole database.

-0.260 %/°C temperature coefficient

Top 4% of the TOPCon 450-500 W segment, against a median of -0.290. Ranked 521st in the whole database.

23.77% module efficiency

Top 4% of the TOPCon 450-500 W segment, against a median of 22.52%. Ranked 586th in the whole database.

What owners get
Quarter-cut N-type TOPCon cells

A new generation of quarter-cut cells reduces resistive losses and improves current distribution compared to standard half-cut designs. Combined with n-Type TOPCon technology, the module achieves a lower power temperature coefficient and better low-irradiance performance than p-Type PERC modules.

Bifacial double-glass construction

The double-glass bifacial design captures reflected light from the ground to boost energy yield without increasing the installed footprint, while also limiting power degradation and improving mechanical resistance to snow and wind loads.

30-year linear power warranty

The series offers a 30-year linear power warranty, well above the market-standard 25 years used by most Tier-1 manufacturers. For investors this translates into a lower LCOE over the full lifecycle of the installation.

Established German Tier-1 manufacturer

AE Solar has operated since 2003, is headquartered in Germany, and has held BloombergNEF Tier-1 status continuously since 2021 (its 18th consecutive quarterly inclusion in 2026), making it the only German-headquartered PV module maker on that list - a strong bankability signal for the METEOR III series.

High efficiency up to 24.27%

The 23.77-24.27% efficiency range places METEOR III at the upper end of the 475-485 Wp TOPCon segment, approaching leaders like the Gokin GK-5-54HG/HGb (24.3%) and clearly outperforming designs such as the ZNShine ZXM7-UHLD120 (22.47%).

Trade-offs
No long field track record yet

METEOR III launches in 2026, so unlike more established competing series (e.g. Gokin GK-5-54HG), it lacks multi-year, independent field data on degradation and durability in real-world installations.

Notes from the database
  • Efficiency of 23.8% is 1.2pp above the TOPCon 450-500W median (22.5%)
  • 237.9 W/m² power density - 12.7 W/m² more than TOPCon 450-500W median (225.2 W/m²), more power per roof area
  • -0.26%/°C temperature coefficient (median: -0.29%/°C) - retains ~1% more power at high temperatures
  • 85% bifaciality enables rear-side power generation, boosting yield by 4-13% on reflective surfaces
  • In the top 4% for efficiency among all TOPCon panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 475 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 23.77 % Strong Segment median 22.52%
Vmpp · Impp 31.05 V · 15.30 A Operating point at max power
Voc · Isc 36.58 V · 15.93 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 1762×1133×30 mm · 2.00 m² of roof
Weight 24.0 kg Typical Typical · median 24.0 kg
Cells 192 · TOPCon Monocrystalline
Bifaciality 85 % Rear output as a share of front
Coefficient Pmax -0.260 %/°C Strong top 4% of its segment
Coefficient Voc · Isc -0.240 · 0.046 %/°C
NOCT 41 °C At 800 W/m², 20 °C ambient
Product warranty 15 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 88.8 % Equals 415 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by AE Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 475 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.260 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
AE Solar AE CMEQ-48BDS-475 475 W 23.77% -0.260 24.0 kg You are here
JKM510T-48HL6M-DB 510 W 25.52% -0.240 22.0 kg +35 W, cooler, +1.8 pp
JKM505T-48HL6M-DB 505 W 25.27% -0.240 22.0 kg +30 W, cooler, +1.5 pp
JKM500T-48HL6M-DB 500 W 25.02% -0.240 22.0 kg +25 W, cooler, +1.2 pp
LR7-54HJD-510M 510 W 25.00% -0.240 23.5 kg +35 W, cooler, +1.2 pp
AIKO-A495-MCE54Mw 495 W 24.80% -0.260 21.0 kg +20 W, lighter, +1.0 pp
JKM495T-48HL6M-DB 495 W 24.77% -0.240 22.0 kg +20 W, cooler, +1.0 pp
LR7-54HJD-505M 505 W 24.70% -0.240 23.5 kg +30 W, cooler, +0.9 pp
WST-505BKX54-A2 505 W 24.70% -0.260 25.0 kg +30 W, heavier, +0.9 pp
SPR-BE54-HD505 505 W 24.70% -0.260 26.0 kg +30 W, +0.9 pp, +10 yr warranty
CMER-64BD-290 290 W 14.53% -0.290 23.0 kg -185 W, hotter, -9.2 pp
CMER-64BD-295 295 W 14.78% -0.290 23.0 kg -180 W, hotter, -9.0 pp
CMER-64BD-300 300 W 15.03% -0.290 23.0 kg -175 W, hotter, -8.7 pp
CMER-64BD-305 305 W 15.28% -0.290 23.0 kg -170 W, hotter, -8.5 pp
CMER-64BD-310 310 W 15.53% -0.290 23.0 kg -165 W, hotter, -8.2 pp
AE_CMD-108BD-Terracotta 360 W 18.03% -0.320 26.0 kg -115 W, hotter, -5.7 pp
AE_CMD-108BD-Emerald 375 W 18.78% -0.320 26.0 kg -100 W, hotter, -5.0 pp

Found 1444 panels of the same or similar size to this one, within ±10 mm. See them here Found 1474 panels of the same or similar size to this one, within ±25 mm. See them here Found 3758 panels of the same or similar size to this one, within ±50 mm. See them here Found 4117 panels of the same or similar size to this one, within ±100 mm. See them here

About the METEOR III series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

How does quarter-cut cell technology in the METEOR III panels differ from standard half-cut cells?
Quarter-cut cells are divided into four segments instead of two as in half-cut technology. Smaller segments mean lower current flowing through each path, which reduces resistive losses and limits heat buildup in the module. In practice this results in higher overall panel efficiency and better tolerance to partial shading, since damage or shading of one cell fragment has a smaller impact on the whole string's performance.
Do bifacial METEOR III panels require special mounting to boost energy yield?
No special mounting is required, but to fully benefit from the bifacial design it's best to mount the panels on a racking system with greater clearance above the ground and over a light, reflective surface, such as white gravel or EPDM membrane. A sloped roof with dark tiles also works, but the rear-side gain will be lower than on ground-mount or carport installations with a bright background.
What is the difference between the product warranty and the power warranty on the METEOR III series?
The product warranty covers 15 years and applies to material and workmanship defects, including the frame, connectors, and laminate. The power warranty covers 30 years and guarantees a minimum output level over time, i.e., what percentage of nominal power the panel retains after years of operation. This second warranty is significantly longer than the market standard of 25 years, improving long-term return on investment.
Are METEOR III panels suitable for cold climates and low-light conditions?
Yes, the n-Type TOPCon cells used in METEOR III have a lower power temperature coefficient than classic p-Type PERC cells, meaning smaller power losses at high module operating temperatures. TOPCon technology also performs better under low irradiance, such as overcast skies or early morning light, allowing the panel to generate energy more efficiently than older PERC-based designs.
What is the maximum power output of the METEOR III series and what installations is it suited for?
METEOR III modules reach up to 485 Wp maximum power output. Combined with the bifacial double-glass design, this power level makes the series well suited for large residential prosumer installations as well as commercial projects, where power density per square meter of roof or ground and Tier 1 quality assurance matter most.
Is AE Solar a reliable manufacturer, and what does Tier 1 status mean for the METEOR III series?
AE Solar is headquartered in Germany and holds Tier 1 status under the Bloomberg New Energy Finance classification, indicating financial stability, project bankability, and German-standard quality control. For customers this translates into lower investment risk, easier project financing, and greater confidence that the manufacturer will be able to honor its long-term warranty commitments.
Add to compare