Skip to main content
SolarEdge SE40K

SolarEdge SE40K

40 kW Grid-tie Three-phase
Compare with closest alternative Datasheet PDF
Rated AC (kW)
40.00
Weak · bottom 23%
Euro eff. (%)
98.0
Typical · median 98.2%
MPPT
-
Not published
Max DC (V)
1000
Typical · median 1100 V
Weight (kg)
32.0
Strong · 32.0 kg below median
Warranty (yrs)
20
Strong · top 5%

The SolarEdge SE series inverters is a grid-tie solution designed for use with power optimizers, enabling MPPT to be performed at the module level rather than the entire string. In practice, this translates to significantly better performance under shaded conditions, dirt coverage, or panel variations, and greater design flexibility for installations with different roof orientations. For the user, the key advantage is modular monitoring - installers quickly identify problematic panels, while owners monitor system performance through the portal and app. Configuration is done via SetApp, simplifying commissioning and service without a traditional display. Communication can utilize Ethernet, WiFi, and wired interfaces, depending on the variant and building requirements. High European efficiency translates to genuinely lower conversion losses in typical operating conditions in Poland. Selected models are compatible with SolarEdge Home energy storage systems, facilitating expansion for self-consumption and backup. The SE series is suitable for both residential and commercial installations, where safety, diagnostics, and reliable performance backed by certification and manufacturer warranty are essential.

Ranking

243 inverters from 30 to 100 kW
Metric This inverter Median Position in class Rank in class
European efficiency 98.0% 98.2% Typical 99
MPPT trackers - 4 Not published -
Max DC input voltage 1000 V 1100 V Typical 125
Weight per kW 0.8 1.1 Strong · top 16% 33
Warranty 20 yrs 5 yrs Strong · top 5% 1
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Price offers

1 from shops we track
Shop Country Price Per kW Stock Offer updated Link to shop
ussolarsupplier.com United States 4 660 $ net 116.50 $/kW In stock 16h ago Visit shop

Specifications

Open datasheet PDF
Rated AC power 40 kW Continuous output
Max apparent power 40.00 kVA
Phases Three-phase
Nominal AC voltage 400 V SE25K/SE33.3K: 304–437/176–253; 320–478/184–264.5 (L-L/L-N). SE40K: 422.5–529/244–305 (L-L/L-N)
Max AC current 48.2 A
Grid frequency 50 Hz Range 50/60 ±5%
Power factor +/-0.2 to 1
Harmonic distortion (THD) 3.0 %
Max DC input power 70.00 kW DC/AC ratio 1.75
Max DC voltage 1000 V Caps the string length
MPPT voltage range 680 to 1000 V
European efficiency 98.0 % Weighted across part loads
Max efficiency 98.1 % Best single operating point
Dimensions 558 × 328 × 273 mm Height × width × depth
Weight 32.0 kg 0.8 kg per kW
Enclosure IP65
Cooling forced-air
Noise 62 dB
Operating temperature -40 to 60 °C
Interfaces Wi-FiEthernet
Protocols RS485Wi‑Fi (optional)Cellular (optional)Ethernet (module-level monitoring; optional comms supported)
Protection AFCIDC switchSurge protection
Warranty 20 years Standard manufacturer cover
Certifications IEC 62109-1IEC 62109-2VDE-AR-N-4105VDE-AR-N-4110AS 4777EN 50549-1EN 50549-2CEI-021CEI-016VDE 0126-1-1IEC 61000-6-2IEC 61000-6-3 Class AIEC 61000-3-11IEC 61000-3-12RoHS

Pros and cons

5 positive · 3 caution
What owners get
Module-Level MPPT - Measurable Yield Gain

With power optimizers, MPPT is performed per panel rather than per string. Independent analyses indicate this translates to 2-10% higher annual energy yield under partial shading or module-mismatch conditions. This advantage is unattainable with conventional string inverters operating without optimizers.

HD-Wave Weighted Efficiency Up to 99%

The SE series with HD-Wave technology achieves a weighted efficiency (CEC/EU) of up to 99%, while typical Tier-1 string inverters (Fronius, SMA) fall within the 97.0-98.5% range. The ~1 percentage-point difference-under Polish irradiance conditions of approximately 1,000-1,100 kWh/kWp/year-results in meaningfully lower conversion losses over the system's entire operational lifetime.

SafeDC - Arc-Flash and Fire Safety

SolarEdge's proprietary SafeDC feature automatically reduces DC voltage to 1 V upon detection of an arc fault or grid disconnection. This capability is increasingly mandated by insurers and fire safety authorities, and is not available in standard string inverters deployed without power optimizers.

Module-Level Monitoring and SetApp

The SolarEdge monitoring portal and mobile app provide real-time visibility into each individual panel's performance, reducing field troubleshooting time from several hours to a matter of minutes. Commissioning and periodic maintenance via SetApp-a smartphone-based configuration tool requiring no display on the inverter itself-minimizes the risk of setup errors.

12/25-Year Inverter/Optimizer Warranty

The standard warranty covers 12 years on the inverter (extendable to 20-25 years) and 25 years on the power optimizers. Fronius and SMA typically offer 5-10 years standard on their inverters (with extension options), making the SolarEdge warranty package highly competitive in institutional tenders and project finance scenarios.

Trade-offs
System Cost Premium of 20-35%

Mandatory installation of a power optimizer on every panel increases total system cost by an estimated 20-35% compared to an equivalent string inverter system (e.g., Fronius Symo / SMA Sunny Tripower). In installations with negligible shading, the yield improvement does not offset the higher CAPEX, extending the investment payback period.

Higher Component Count Increases Failure Probability

A 20-panel installation adds 20 active electronic devices-power optimizers-operating outdoors for 25 years. Statistically, a greater number of active components raises the likelihood of individual unit failures, and replacing a single optimizer requires a rooftop visit and identification of the defective module.

Significant Financial Difficulties at the Manufacturer

Between 2024 and 2025, SolarEdge conducted four rounds of layoffs totaling approximately 2,200 positions, shut down its energy storage division, and reported a 64% year-over-year revenue decline in Q3 2024 (to approximately $260 million USD). The ongoing restructuring program and CEO change in August 2024 raise legitimate concerns about long-term service continuity and spare parts availability in the European market.

Inverter Power Euro eff. MPPT Weight Difference
SolarEdge SE40K 40 kW 98.0% - 32.0 kg You are here
MID 40KTL3-X 40 kW 98.5% - 30.5 kg +0.5 pp efficiency, 1.5 kg lighter
SUN2000-40KTL-M3 40 kW 98.4% 4 43.0 kg +0.4 pp efficiency, 11.0 kg heavier
Solis-40K 40 kW 98.4% 4 61.0 kg +0.4 pp efficiency, 29.0 kg heavier
SG40CX-P2 40 kW 98.3% 4 40.0 kg 8.0 kg heavier
SG40CX 40 kW 98.3% - 58.0 kg 26.0 kg heavier
S5-GC40K 40 kW 98.3% - 42.1 kg 10.1 kg heavier
SUN-40K-G-LV 40 kW 98.3% 4 60.0 kg 28.0 kg heavier
SOFAR 40KTLX-G3 40 kW 98.2% - 37.0 kg 5.0 kg heavier

About the SolarEdge SE series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this model's own.

What is the warranty on SolarEdge SE inverters and can it be extended?
The standard manufacturer warranty on SolarEdge SE series inverters is 12 years. It can be extended to either 20 or 25 years for a one-time fee, which must be paid within 24 months of the device's shipment date from SolarEdge. Extended warranty pricing for residential installations typically ranges from $140 to $700 depending on the model. Power optimizers are covered under a separate 25-year warranty.
Does a SolarEdge SE inverter have to operate with power optimizers, and what does that mean in practice?
Yes, SE series inverters are designed to work exclusively with SolarEdge power optimizers. Each optimizer is mounted at the module level and performs MPPT independently for every individual panel. In practice, this means that a shaded or soiled panel does not reduce the output of the entire string. Additionally, the SafeDC feature is active at all times: when the inverter is shut down, it automatically reduces DC voltage to 1 V per panel, significantly improving the safety of the installation.
How does SetApp configuration work, and is a computer required to commission an SE inverter?
SetApp is a free smartphone application (available for Android and iOS) that replaces the traditional inverter display. The installer pairs the device via Bluetooth and configures all parameters directly from their smartphone, with no laptop or additional software required. This streamlines both initial commissioning and subsequent servicing. System owners can independently monitor their installation's performance through a dedicated SolarEdge monitoring portal and mobile application.
What is the European efficiency of SolarEdge SE inverters, and does it translate into real-world savings?
The weighted European efficiency of SE series inverters ranges from 97.3% to 97.6%, with peak efficiency reaching up to 98%. European efficiency reflects inverter performance across varying irradiance levels, making it a better indicator of actual conversion losses in temperate climates than peak efficiency alone. A higher European efficiency rating means lower losses throughout the year, resulting in measurably more energy exported to the grid or consumed on-site.
Can a SolarEdge SE inverter be expanded with an energy storage system?
Selected models in the SE series are compatible with SolarEdge Home energy storage systems. The interface supports connection of SolarEdge Home BAT batteries, with a maximum charge and discharge power of 5000 W. Adding battery storage increases self-consumption of PV-generated energy and enables backup power functionality. Prior to purchase, it is recommended to verify compatibility between the specific SE model and the intended battery variant.
Is a SolarEdge SE inverter suitable for installations with panels mounted on multiple roof sections or facing different orientations?
Yes, this is one of the primary advantages of the SolarEdge SE architecture. Because each power optimizer operates independently for its assigned panel, modules mounted on south-, east-, and west-facing roof sections can be combined within a single string without causing mutual output degradation. This is particularly beneficial for complex or irregular rooftops where a conventional string inverter would incur significant losses due to module mismatch.
Compare with alternative