The SolarEdge Home Hub Inverter series are hybrid inverters, designed for PV installations intended for battery storage and backup power. These devices operate with module-level power processors (MLPP), enabling module-level monitoring and effective yield optimization, especially beneficial for rooftops with varying orientations or periodic shading. The implementation of two independent MPPTs simplifies multi-string system design - each string can operate at its optimal point without drawing down the performance of the entire string.
European efficiency standards translate to significantly better real-world energy production under typical operating conditions in Poland, not just in laboratory settings. On a daily basis, you’ll appreciate mySolarEdge for monitoring production and consumption, along with its convenient control via SetApp. Connectivity can include Ethernet, while WiFi is typically available as an optional feature - depending on the version and configuration. Built-in safety features, such as SafeDC, Sense Connect, and AFCI, help mitigate fire risks. This is an excellent choice for demanding residential installations and smaller commercial projects, particularly where expandability for battery storage, backup capabilities, and a unified service, warranty, and certification ecosystem are essential.
Ranking
Specifications
Pros and cons
According to the official ROW datasheet (2023), single-phase models achieve a weighted European efficiency of 98.3-99%, while three-phase models reach 97.3-97.6%. This ranks among the highest figures in the hybrid inverter class, translating into measurably higher annual energy yield under Polish climatic conditions - characterized by frequent overcast skies and low solar elevation angles.
The HD-Wave optimizer architecture enables per-panel production monitoring directly within the mySolarEdge app. This allows rapid remote diagnosis of energy losses caused by shading, soiling, or module faults - eliminating the need for an on-site service visit and reducing O&M costs over the system's lifetime.
Two separate MPPT inputs allow strings from different roof orientations (e.g., south + east/west) to be connected without mutual performance drag. In practice, this reduces orientation-related losses by 5-15% compared to single-MPPT solutions in multi-azimuth installations.
The Home Hub supports energy storage up to 30 kWh and delivers backup power of 11.4 kW (per NAM datasheet), enabling emergency supply to critical circuits. The single-vendor ecosystem (inverter + SolarEdge Home Battery) simplifies integration, certification, and warranty servicing.
Built-in SafeDC (automatic DC voltage reduction to <1 V upon grid loss), arc-fault circuit interrupter (AFCI) detection, and Sense Connect set this series apart from many competitors - including the Huawei SUN2000 and Fronius Symo GEN24 - which offer only a subset of these protections as standard or charge extra for them.
Between 2024 and 2025, SolarEdge carried out four rounds of layoffs totaling a significant share of its workforce, while Q3 2024 revenue fell 64% year-over-year. The stock lost approximately 95% of its value from its 2022 peak, with market capitalization falling to roughly $886 million in early 2025. For systems covered by a standard 12-year inverter warranty, this represents a genuine risk to the continuity of technical support and spare-parts availability.
The SolarEdge architecture requires an optimizer (priced at $80-110 per unit in Western markets, or approximately 200-350 PLN per unit in Poland) on every module. For a typical 10 kWp system (roughly 20-22 modules), this adds 4,000-7,700 PLN compared to string inverters without optimizers (e.g., Fronius, SMA), extending the investment payback period.
Alternatives
StorEdge AC Coupled Single Phase Inverter (HD‑Wave) – SE3680H / H3680SE
3.68 kW
98.8%
-
7.8 kg
4.2 kg lighter
About the SolarEdge Home Hub Inverter series
These answers cover the whole series. Where a figure differs, the specification above is this model's own.