ASM vs Jinergy - solar panel manufacturer comparison
Jinergy has the broader catalog (10 vs 1 models). Jinergy leads on peak efficiency at 23.27%. Jinergy leans bifacial (50% of lineup).
Both catalogues are read from the manufacturers' own datasheets. A brand is not scored against the market here, only against the other brand on this page.
The two companies
Australian Solar Manufacturing (ASM) is a small Australian solar panel assembler that produces crystalline monocrystalline modules domestically using components sourced from Germany, Japan, the USA, and China. The company focuses on providing locally assembled PV modules tailored to Australian conditions, supporting...
- Founded
- 2009
- Headquarters
- Hallam, Victoria, Australia
- Employees
- 1-10
Catalogue against catalogue
An average over a catalogue describes the range a manufacturer publishes, not the module you would buy. A brand with two flagship panels and eighty older ones averages worse than one that has retired its back catalogue.
What each of them builds
Jinergy skews to higher efficiency: 20% of lineup is 23%+
Dominant cell tech: <strong>PERC</strong> (50%)
The flagships
Written summary
ASM is a brand name for which I was unable to locate credible, independent information in any of the targeted searches. No major industry sources - including PV Tech, PV Magazine, TaiyangNews, EnergySage, or BloombergNEF Tier 1 lists - return results for a solar panel manufacturer operating under that brand. Given that constraint, the comparison below covers Jinergy in detail and describes ASM only in qualified terms, as required by the research instructions.
Jinergy is a Chinese photovoltaic manufacturer headquartered in Hohhot, Inner Mongolia, operating under the parent group Jinneng Holding. The company entered the HJT (heterojunction) module segment earlier than most Chinese peers, having launched its first commercial HJT modules around 2017. Its reported annual production capacity spans both monocrystalline PERC and HJT lines, with figures in industry listings pointing to roughly 2 GW of combined output in recent years, though the HJT share is growing. Jinergy's modules appear in the TaiyangNews Top Solar Modules listing for January 2026, ranking around 30th globally with a rated efficiency of approximately 22.85% for its JNHM144 HJT series. No confirmed BloombergNEF Tier 1 designation was surfaced in the searches consulted. ASM, by contrast, could not be verified as an established solar module brand in any public industry source; it is possible the name refers to a regional or private-label assembler, but no claims about scale, Tier 1 status, or technology can responsibly be made here.
On the product side, Jinergy's catalog is clearly oriented toward performance-focused buyers. Its HJT bifacial modules - featuring low-temperature coefficients, no LID degradation, and strong low-light response - suit utility-scale ground mounts and premium commercial rooftop projects where long-term yield optimization justifies a higher upfront cost. The company also markets an all-black design variant targeting the residential rooftop segment in markets such as Japan and Australia. Because ASM's product families, cell technologies, and market positioning remain unverifiable, any buyer evaluating that brand against Jinergy should request third-party datasheet verification, PVEL test reports, and proof of bankability from the vendor directly before proceeding.
Generated by Claude Sonnet · 2026-06-20
Other brand comparisons
Shop prices: See 4 Jinergy offers
Comparisons are computed from manufacturer datasheets held in the ComparePV database and may not reflect a brand's complete current lineup. Nothing on this page is paid placement.