Strong in heat, heavy for its output
The HYPERSOL VSMDH.54.AAA.05 series consists of N-TYPE modules engineered for investors who expect maximum output from every available square meter of roof or ground-mounted array. The N-type half-cut cells with 16 busbars reduce resistive losses and improve performance under partial shading, translating into a real gain in energy yield under conditions typical for the Polish climate. The glass-glass bifacial construction captures additional reflected irradiance from the surrounding surface, boosting energy production without increasing the installation footprint. The manufacturer places strong emphasis on durability - the module offers high resistance to PID, LID, and LeTID degradation, maintaining stable electrical parameters throughout its service life. A sealed, potted IP68 junction box provides added protection against moisture, which matters for installations exposed to harsh weather conditions. A low power temperature coefficient limits generation losses during hot weather, supporting higher yield during the summer season. The entire series is backed by a 30-year linear power warranty and a separate product warranty, making it a solid choice for both rooftop installations and ground-mounted solar farms that require long-term reliability.
Ranking
Signals from the data
Residential, commercial and shaded-installations.
Weight-limited structures, tight roof space and roofs where every square metre has to count.
Top 2% of the N-type 400-450 W segment, against a median of -0.290. Ranked 1,347th in the whole database.
Bottom 2% of the N-type 400-450 W segment, against a median of 51.2. Ranked 12,563rd in the whole database.
Bottom 15% of the N-type 400-450 W segment, against a median of 21.95%.
Bottom 17% of the N-type 400-450 W segment, against a median of 218.4.
- At 21.2% efficiency, this panel is 0.7pp below the N-type 400-450W median of 21.9%
- Power density of 212.5 W/m² is 5.9 W/m² below N-type 400-450W median (218.4 W/m²) - needs more roof space
- Temperature coefficient of -0.28%/°C matches the N-type 400-450W median
- At 25.1 kg (3.1 kg above N-type 400-450W median of 22.0 kg), requires checking roof load capacity
- Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface
Specifications
Datasheet charts
Measured curves published by Vikram Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 415 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Alternatives
Found 1797 panels of the same or similar size to this one, within ±10 mm. See them here Found 1928 panels of the same or similar size to this one, within ±25 mm. See them here Found 3413 panels of the same or similar size to this one, within ±50 mm. See them here Found 4007 panels of the same or similar size to this one, within ±100 mm. See them here
About the HYPERSOL VSMDH.54.AAA.05 series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.