Skip to main content

Premier Energies PE-495HB

495 Wp PERC Bifacial 3000%
ComparePV verdict

Warranty pick, no clear weak spot

Rank 9,459 of 14,129
Compare panels Datasheet PDF
Power (Wp)
495
Strong · top 5%
Efficiency (%)
20.86
Typical · median 20.82%
Density (Wp/m²)
208.6
Typical · median 208.5
Temp (%/°C)
-0.350
Typical · median -0.350
Weight (kg)
26.0
Typical · median 24.5 kg
Warranty (yrs)
30
Strong · top 20%

The PEI-132 series from Premier Energies consists of bifacial modules with a transparent rear backsheet, engineered to capture sunlight from both the front and rear sides of the panel. The use of half-cut PERC cells combined with SMBB (multi-busbar) technology improves current collection and reduces losses caused by microcracks or partial shading, resulting in steadier performance throughout the module's service life. The dual-glass, bifacial design with a transparent backsheet allows additional energy to be captured from light reflected off the ground, which is especially valuable for ground-mount installations, light-colored rooftops, or carport canopies. These modules stand out thanks to their strong resistance to PID degradation and reinforced mechanical build, certified for wind and snow load, making them well suited to demanding climatic conditions. The PEI-132 series is versatile, suitable for residential installations as well as commercial projects, utility-scale solar farms, and off-grid systems. A long-term linear power output warranty combined with a solid product warranty makes it an appealing choice for investors seeking a lower LCOE and predictable returns over decades of operation.

Ranking

452 panels in the segment PERC 450-500 W
Metric This panel Median Position in segment Overall rank
Module efficiency 20.86% 20.82% Typical 10,423
Power density 208.6 208.5 Typical 10,408
Temperature coefficient -0.350 -0.350 Typical 10,489
Weight per kWp 52.5 53.1 Typical 6,168
Performance warranty 30 yrs 25 yrs Strong · top 20% 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

6 positive · 2 caution
Best for

Owners who value a long output guarantee.

Strengths
30 year performance warranty

Top 20% of the PERC 450-500 W segment, against a median of 25 yrs.

What owners get
30-year linear power warranty

Premier Energies provides a 30-year linear power warranty guaranteeing >85% of nominal output after 30 years, while most peer comparables (JA Solar, Trina Solar) typically offer 25 years with output dropping to around 84.8%. This 5-year extension meaningfully improves the project's projected LCOE.

Bifacial design for extra energy yield

The double-glass bifacial construction with transparent backsheet captures light reflected off the ground, which is particularly valuable for ground-mount installations, bright rooftops, and solar carports - a design approach also used by peer comparable Trina's Vertex Backsheet Monocrystalline Module, confirming it as a premium-segment standard.

Half-cut PERC cells with SMBB technology

Half-cut PERC cells in a multi-busbar (SMBB) configuration reduce current losses from microcracks and partial shading, delivering more stable output under non-uniform irradiance compared to modules using conventional full-size cells.

Enhanced mechanical and PID resistance

The modules are certified for elevated wind and snow loads and show high resistance to PID degradation, lowering the risk of power loss in harsh climates and increasing the predictability of energy yield over decades of operation.

Established manufacturer since 1995

Premier Energies has operated in the renewable energy sector since 1995, which combined with a 12-year product warranty gives investors greater confidence in service stability and technical support availability compared to younger, less established manufacturers.

Trade-offs
Lower efficiency than peer modules

The PEI-132 efficiency range (20.43-21.49%) is noticeably lower than peer comparables: JA Solar JAM60S40 LR (23%), Sunlike SKT490~510M12-108D4 (22.93%), and Trina Vertex (21.2%) at the same maximum 510 Wp rating. This means a larger mounting area is required to reach the same installed capacity.

Older PERC cell technology

The series relies on PERC technology, while part of the premium segment - including Premier Energies' own newer 590 W TOPCon lineup - is shifting to N-type TOPCon cells with lower LID degradation and better high-temperature performance, which may make PEI-132 less technologically competitive over time.

Notes from the database
  • Efficiency of 20.9% matches the PERC 450-500W median
  • Power density of 208.6 W/m² matches the PERC 450-500W median
  • Temperature coefficient of -0.35%/°C matches the PERC 450-500W median
  • At 26.0 kg, this panel is 1.5 kg heavier than the PERC 450-500W median (24.5 kg) - more demanding for installation crews
  • #10423 for efficiency, #10489 for temperature performance out of 14129 panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 495 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 20.86 % Typical Segment median 20.82%
Vmpp · Impp 38.14 V · 12.98 A Operating point at max power
Voc · Isc 45.28 V · 13.92 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2093×1134×35 mm · 2.37 m² of roof
Weight 26.0 kg Typical Typical · median 24.5 kg
Cells 132 · PERC Monocrystalline
Bifaciality 3000 % Rear output as a share of front
Coefficient Pmax -0.350 %/°C Typical median -0.350 of its segment
Coefficient Voc · Isc -0.300 · 0.040 %/°C
NOCT 42 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Strong top 20% · median 25 yrs
Degradation 2.00 → 0.45 % First year, then annual

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.350 %/°C against a segment median of -0.350
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Premier Energies PE-495HB 495 W 20.86% -0.350 26.0 kg You are here
LR7-54HJD-510M 510 W 25.00% -0.240 23.5 kg Cooler, lighter, +4.1 pp
AIKO-A495-MCE54Mw 495 W 24.80% -0.260 21.0 kg Cooler, lighter, +3.9 pp
LR7-54HJD-505M 505 W 24.70% -0.240 23.5 kg Cooler, lighter, +3.8 pp
WST-505BKX54-A2 505 W 24.70% -0.260 25.0 kg +10 W, cooler, +3.8 pp
AIKO-A490-MCE54Mw 490 W 24.50% -0.260 21.0 kg Cooler, lighter, +3.6 pp
LR7-54HJD-500M 500 W 24.50% -0.240 23.5 kg Cooler, lighter, +3.6 pp
CIPRO-TN9C54M-500W 500 W 24.50% -0.260 21.4 kg Cooler, lighter, +3.6 pp
PE-485HB 485 W 20.43% -0.350 26.0 kg -10 W, -0.4 pp
PE-490HB 490 W 20.64% -0.350 26.0 kg -0.2 pp
PE-500HB 500 W 21.07% -0.350 26.0 kg +0.2 pp
PE-505HB 505 W 21.28% -0.350 26.0 kg +10 W, +0.4 pp
PE-510HB 510 W 21.49% -0.350 26.0 kg +15 W, +0.6 pp
GKA120N-PRO-590W 590 W 23.82% -0.300 26.7 kg +95 W, cooler, +3.0 pp
GKA120N-PRO-585W 585 W 23.62% -0.300 26.7 kg +90 W, cooler, +2.8 pp
BGO 580 580 W 23.50% -0.290 26.0 kg +85 W, cooler, +2.6 pp
GKA120N-PRO-580W 580 W 23.42% -0.300 26.7 kg +85 W, cooler, +2.6 pp

Found 405 panels of the same or similar size to this one, within ±10 mm. See them here Found 416 panels of the same or similar size to this one, within ±25 mm. See them here Found 433 panels of the same or similar size to this one, within ±50 mm. See them here Found 961 panels of the same or similar size to this one, within ±100 mm. See them here

About the PEI-132 series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

How does the bifacial PEI-132 module differ from a standard monofacial panel?
The PEI-132 panel features a dual-glass construction with a transparent rear cover, allowing it to generate power not only from direct sunlight on the front but also from light reflected off the ground onto the rear cells. In practice, with a light-colored surface, white membrane roofing, or carport mounting, this bifacial design can deliver an additional energy gain compared to a monofacial module with the same front-side power rating.
What is the maximum power output of the PEI-132 panel and what installations is it suited for?
Modules in the PEI-132 series reach a maximum power output of up to 510 Wp. Combined with the bifacial design, this makes the panel well suited for ground-mount installations, utility-scale solar farms, commercial rooftops, and off-grid systems, as well as residential installations where high output per unit of roof area matters.
What does half-cut PERC cell technology with multi-busbar (SMBB) mean for the PEI-132 panels, and does it provide real benefits?
Half-cut PERC cells reduce resistive losses and the current flowing through each cell half, while SMBB (multi-busbar) technology improves current collection even in the presence of microcracks or partial shading. The result is higher, more stable energy output over time, lower sensitivity to minor cell damage, and better resilience to uneven light exposure, such as passing shadows.
What warranty comes with the PEI-132 panels, and what can I expect after years of use?
Premier Energies provides a 12-year product warranty and a 30-year linear power warranty for the PEI-132 series. This means the manufacturer guarantees a gradual, predictable power decline spread over three decades, allowing investors to plan long-term returns and achieve a lower levelized cost of energy (LCOE) over the system's lifetime.
Do PEI-132 panels handle PID degradation and harsh weather conditions well?
Yes, PEI-132 modules offer high resistance to PID (potential-induced degradation), a phenomenon that causes power loss due to induced voltage within the system. The reinforced mechanical frame is also certified for wind and snow load ratings, making these panels a solid choice for installations in regions with variable climates, strong winds, or heavy snowfall.
Who manufactures the PEI-132 panels, and is it worth choosing an India-based manufacturer?
The PEI-132 series is manufactured by Premier Energies, a company headquartered in India and one of the larger Asian cell and module producers outside of China. For investors, this can mean supply chain diversification and potentially reduced exposure to tariffs or trade restrictions affecting Chinese-made products, which can matter for commercial projects and public tenders.
Add to compare