Strong in heat, no clear weak spot
Jinko Solar BIPV Color Steel Tile Roof is an advanced structural solution that replaces traditional roofing with active, energy-generating modules. This series is based on high-efficiency N-type cells, allowing for excellent performance parameters even in low sunlight. The key differentiator is the integrated 2-in-1 structure, which combines the insulating and protective functions of the roof with the photovoltaic function, completely eliminating the need for heavy, traditional mounting systems. Consequently, this solution is ideal for buildings with limited structural load capacity, such as large-scale logistics halls or modern manufacturing plants. The product is characterized by exceptional tightness and resistance to harsh weather conditions, effectively solving the problem of potential leaks encountered with standard add-on installations. The TopCon cell technology used guarantees higher resistance to degradation and significantly better temperature performance compared to competing products. For the investor, this means maximum utilization of the available roof surface while simultaneously reducing total building material costs. The Color Steel Tile Roof series distinguishes itself from alternative solutions not only through aesthetics but, above all, through the highest fire safety, which is a priority in the commercial sector. This is a comprehensive approach to sustainable architecture that effectively combines the durability of steel with the innovation of photovoltaics.
Ranking
Signals from the data
BIPV and commercial.
Top 21% of the 260-460 W band, against a median of -0.330.
The top variant in the series achieves 21.83% module efficiency, outperforming all peer comparables: VDS-S120/M6H (20.8%), Gamko GKA166M120 (20.85%), and Heckert NeMo 3.0 (20.0%). Even the series' lower bound (20.63%) exceeds the peer group median, translating into higher energy yield per unit of roof area.
N-type TOPCon cells degrade at approximately 0.4% per year - roughly 43% slower than P-type PERC cells (~0.7%/yr). Reduced LID (Light-Induced Degradation) and superior high-temperature performance result in meaningfully higher cumulative energy yield over the full 30-year system lifetime.
Jinko Solar backs the BIPV series with a 30-year linear power warranty, exceeding the industry-standard 25 years offered by most Tier-1 manufacturers. This commitment is underwritten by 11 consecutive PVEL Top Performer certifications and a global deployment base exceeding 300 GW, significantly reducing warranty creditworthiness risk.
The integrated 2-in-1 design simultaneously replaces conventional roofing and eliminates the PV mounting structure, reducing both BoS costs and dead load on the roof. For large-span logistics and manufacturing facilities with limited structural capacity, this is a decisive advantage over traditional rooftop overlay installations.
Jinko Solar holds BNEF Tier-1 Bankable status, facilitating project financing and reducing counterparty risk for banks and infrastructure funds. Founded in 2006, Jinko is one of the world's largest PV module manufacturers, with active technical support and after-sales service networks globally.
BIPV systems typically cost 20-40% more than equivalent rooftop overlay installations (estimated €200-625/m² for BIPV vs. ~€60-120/m² for standard modules), reflecting the dual building-envelope function of the modules. The elevated upfront cost extends LCOE and ROI timelines, which may reduce attractiveness for projects with short financing horizons.
Installing the Color Steel Tile Roof series requires simultaneous coordination of roofing, electrical, and structural crews. Market analyses indicate that BIPV soft costs (design, permitting, multi-trade coordination) run 12-18% higher than standard rooftop PV systems, adding measurably to total project cost in commercial applications.
- At 20.6% efficiency, this panel is 2.2pp above typical BIPV 0-400W modules (median: 18.4%)
- 206.3 W/m² power density - 21.9 W/m² more than BIPV 0-400W median (184.4 W/m²), more power per roof area
- Temperature coefficient of -0.29%/°C vs median -0.35%/°C means ~2% less power loss at 65°C
- #11136 for efficiency, #2220 for temperature performance out of 14129 panels
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Found 5 panels of the same or similar size to this one, within ±10 mm. See them here Found 5 panels of the same or similar size to this one, within ±25 mm. See them here Found 5 panels of the same or similar size to this one, within ±50 mm. See them here Found 5 panels of the same or similar size to this one, within ±100 mm. See them here
About the BIPV Color Steel Tile Roof series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.