Efficiency leader, no clear weak spot
The Jinko Solar Tiger Neo 48HL4M-BDV (dual-glass bifacial) series is designed for maximum yield in locations where every square meter counts, along with stable performance year after year. The use of N-type TOPCon cells combined with the optimized HOT 3.0 architecture delivers excellent performance even under low-light conditions and a slower degradation rate - effectively helping to achieve investment profitability over the long term.
What sets this series apart is the glass-glass construction and bifacial operation. In practice, this means greater resilience to environmental factors and the potential to generate additional yield from reflected light (e.g., on light-colored roofs, membranes, gravel, or ground-mounted systems). The modules are also designed with operational challenges in mind, featuring enhanced resistance to PID and mitigation of LID/LeTID phenomena.
The Tiger Neo 48HL4M-BDV is ideal for commercial and industrial installations, carports, and any scenario where you need high reliability and long warranties without compromising on aesthetics and durability.
Ranking
Signals from the data
Commercial.
Top 5% of the TOPCon 450-500 W segment, against a median of 22.52%. Ranked 678th in the whole database.
Top 5% of the TOPCon 450-500 W segment, against a median of 225.2. Ranked 674th in the whole database.
Within a 1762×1134 mm footprint, the 48HL4M-BDV series achieves 22.27–23.52% module efficiency, matching direct peer comparables Recom Lynx and Sunlike Solar SKT450~470 (both capped at 23.52%). N-type TOPCon eliminates the bulk of LID degradation, meaning nameplate figures are achievable in real-world operation.
The glass-glass bifacial construction enables energy generation from ground-reflected irradiance (albedo), boosting yield by 5–25% over monofacial equivalents depending on surface type (gravel, white TPO membrane, concrete). The SMBB HOT 3.0 architecture further improves current collection and reduces resistive losses.
N-type TOPCon cells lose only 0.29% of rated power per °C above 25°C, compared to -0.35% to -0.45%/°C for standard PERC modules. In Central European conditions where cell temperatures routinely reach 50–70°C in summer, this translates to 1.5–4.5% higher hourly output vs. previous-generation technology.
Jinko guarantees ≤0.4%/year degradation with a ≤1% first-year decline, equating to ≥87.4% of nameplate power retained after 30 years. Many competing series (e.g., standard PERC modules from Trina or JA Solar) offer 25-year power warranties degrading to ~84.8%, making this series more attractive in LCOE calculations for long-horizon projects.
In the 2025 BloombergNEF Bankability Report, Jinko Solar is the only PV manufacturer globally to achieve a 100% bankability rating — a distinction held for 10 consecutive annual surveys. For bank-financed or leased projects, this status eliminates the risk of lender rejection and reduces insurance risk premiums associated with module manufacturer default.
Jinko covers physical defects and module damage for only 15 years, while leading peers — Canadian Solar, LONGi, Trina Solar — routinely offer 25-year product warranties. For residential and C&I installations, the gap may need to be bridged through an extended insurance policy or EPC contractor SLA, adding to the total BoS cost.
- At 23.5% efficiency, this panel is 1.0pp above typical TOPCon 450-500W modules (median: 22.5%)
- 235.2 W/m² power density - 10.0 W/m² more than TOPCon 450-500W median (225.2 W/m²), more power per roof area
- Temperature coefficient of -0.29%/°C matches the TOPCon 450-500W median
- Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof
- #678 for efficiency, #2165 for temperature performance out of 14005 panels
Specifications
Datasheet charts
Measured curves published by Jinko Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 470 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Found 1395 panels of the same or similar size to this one, within ±10 mm. See them here Found 1425 panels of the same or similar size to this one, within ±25 mm. See them here Found 3614 panels of the same or similar size to this one, within ±50 mm. See them here Found 3962 panels of the same or similar size to this one, within ±100 mm. See them here