Skip to main content

JA Solar JAM54D40-415/GB/1500V

415 Wp N-type Bifacial 80%
ComparePV verdict

Middle of its segment, needs the roof space

Rank 10,883 of 14,129
Compare panels Datasheet PDF
Power (Wp)
415
Weak · bottom 13%
Efficiency (%)
21.30
Weak · bottom 19%
Density (Wp/m²)
212.5
Weak · bottom 17%
Temp (%/°C)
-0.300
Weak · bottom 25%
Weight (kg)
21.5
Typical · median 22.0 kg
Warranty (yrs)
30
Typical · median 30 yrs

The JAM54D40 415-440/GB/1500V module series is an advanced solution based on n-type cell technology, which redefines performance standards in the Polish climate. Thanks to the use of bifacial Double Glass architecture, these panels not only generate energy from both sides but also exhibit exceptional resistance to light-induced degradation and extreme weather conditions. It is a key response to the challenges related to installation longevity, as the glass-glass construction minimizes the risk of micro-cracks and chemical corrosion in harsh environmental conditions. This series stands out from the competition with a significantly better temperature coefficient, which translates into tangible energy gains on hot summer days when standard modules rapidly lose efficiency. It is primarily intended for demanding investors seeking maximum power density on limited roof areas and for modern photovoltaic farms where high yields from radiation reflected from the ground are key. The use of the 1500V voltage standard allows for significant optimization of wiring costs in large-scale projects, making this series one of the most cost-effective choices in the premium segment. It is a solid foundation for a safe investment, combining innovative technological solutions with above-average mechanical strength and stability of electrical parameters throughout the product life cycle.

Ranking

322 panels in the segment N-type 400-450 W
Metric This panel Median Position in segment Overall rank
Module efficiency 21.30% 21.95% Weak · bottom 19% 8,585
Power density 212.5 218.4 Weak · bottom 17% 8,858
Temperature coefficient -0.300 -0.290 Weak · bottom 25% 6,152
Weight per kWp 51.8 51.2 Typical 5,203
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 5 caution
Best for

Residential, commercial and shaded-installations.

Not ideal for

Roofs where every square metre has to count, tight roof space and hot climates.

Watch-outs
212.5 watts per square metre

Bottom 17% of the N-type 400-450 W segment, against a median of 218.4.

21.30% module efficiency

Bottom 19% of the N-type 400-450 W segment, against a median of 21.95%.

-0.300 %/°C temperature coefficient

Bottom 25% of the N-type 400-450 W segment, against a median of -0.290.

What owners get
Low temperature coefficient - N-type advantage

N-type TOPCon cells deliver a temperature coefficient of Pmax = -0.29%/°C vs. the typical -0.35%/°C of legacy PERC modules. At a cell operating temperature of 70°C (typical Polish summer conditions), this translates to roughly 3% higher real-world output compared to an equivalent-STC-rated PERC module, while also keeping first-year LID degradation below 1%.

Bifacial Double Glass - albedo energy gain

The module's bifaciality factor is 80% (±10%), yielding an additional 5-15% annual energy gain under typical ground albedo of 20-30% (light gravel, snow, white TPO membrane) versus monofacial modules. The all-glass construction eliminates the rear EVA backsheet, blocking moisture ingress and electrochemical corrosion over a 30+ year service life.

30-year linear power warranty

JA Solar guarantees ≥87.4% of rated power after 30 years at ≤0.40% annual degradation - one of the longest warranty commitments in the 54-cell N-type segment. Direct peer comparables (KDM Kingdom Solar, Seraphim Nebula) do not publicly disclose 30-year warranty terms for equivalent power variants.

1500V system voltage - reduced BoS costs

Support for 1500 V system voltage allows 25-28 modules per string (vs. ~18 at 1000 V), reducing DC cable runs, combiner boxes, and MPPT inputs. For installations above 100 kWp, estimated BoS material savings reach 4-8% of total installed cost.

BNEF Tier-1 bankable manufacturer

JA Solar (founded 2005, HQ China) has maintained continuous BNEF Tier-1 bankable status and is listed in Q1 2026 summaries. Tier-1 status means project financing backed by these modules is accepted by banks and infrastructure funds without additional manufacturer-creditworthiness guarantees.

Trade-offs
12-year product warranty - below newer variants

The /GB/1500V series carries only a 12-year product warranty, while JA Solar's own newer variant from the same family - JAM54D40 LB BF 15Y - offers 15 years. In the premium N-type segment, 12 years is increasingly viewed as the market floor and may be a constraint in project-finance structures requiring extended material coverage.

22.5% max efficiency - Luxor reaches 22.86%

Among direct peer comparables, the Luxor ECO LINE N-TYPE TOPCON NON-REFLECT achieves 22.86% efficiency at the same 440 Wp peak power - 0.36 percentage points higher. For roof installations with tight area constraints (e.g., <20 m²), this translates to approximately 1.6% more energy from the same footprint.

Notes from the database
  • Efficiency of 21.3% is 0.6pp below the N-type 400-450W median (21.9%)
  • Power density of 212.5 W/m² is 5.9 W/m² below N-type 400-450W median (218.4 W/m²) - needs more roof space
  • At -0.30%/°C, hot weather performance is typical for N-type 400-450W panels
  • Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof
  • In the top 61% for efficiency among all N-type panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 415 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 21.30 % Weak Segment median 21.95%
Vmpp · Impp 31.59 V · 13.14 A Operating point at max power
Voc · Isc 37.92 V · 14.02 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 1722×1134×30 mm · 1.95 m² of roof
Weight 21.5 kg Typical Typical · median 22.0 kg
Cells 108 · N-type Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.300 %/°C Weak bottom 25% of its segment
Coefficient Voc · Isc -0.260 · 0.046 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 363 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.300 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
JA Solar JAM54D40-415/GB/1500V 415 W 21.30% -0.300 21.5 kg You are here
JST-EDMH-(445-465)W-TD (465W class) 465 W 23.81% -0.300 20.5 kg +50 W, lighter, +2.5 pp
LX-465M/182R-96+ GG 465 W 23.80% -0.260 23.5 kg +50 W, cooler, +2.5 pp
AIKO-A460-MAH54Mb 460 W 23.60% -0.290 20.5 kg +45 W, cooler, +2.3 pp
LX-465M/182R188-108+ GG 465 W 23.60% -0.290 24.5 kg +50 W, heavier, +2.3 pp
JST-EDMH-(445-465)W-TD (460W class) 460 W 23.56% -0.300 20.5 kg +45 W, lighter, +2.3 pp
LX-460M/182R-96+ GG 460 W 23.55% -0.260 23.5 kg +45 W, cooler, +2.2 pp
PS-MNB108(HCBF)-460W 460 W 23.53% -0.290 20.5 kg +45 W, cooler, +2.2 pp
JAT54S40-460/LR 460 W 23.50% -0.260 19.3 kg +45 W, cooler, +2.2 pp
JAM54S31-380/MR 380 W 19.50% -0.350 19.5 kg Hotter, -1.8 pp, -5 yr warranty
JAM54S31-385/MR 385 W 19.70% -0.350 19.5 kg Hotter, -1.6 pp, -5 yr warranty
JAM54D30-390/MB/1500V 390 W 19.90% -0.350 23.6 kg -25 W, hotter, -1.4 pp
JAM54S31-390/MR 390 W 20.00% -0.350 19.5 kg Hotter, -1.3 pp, -5 yr warranty
JAM54D30-395/MB/1500V 395 W 20.20% -0.350 23.6 kg Hotter, heavier, -1.1 pp
JAM54S31-395/MR 395 W 20.20% -0.350 19.5 kg Hotter, -1.1 pp, -5 yr warranty
JAM54S30-400/MR 400 W 20.50% -0.350 19.5 kg Hotter, -0.8 pp, -5 yr warranty
JAM54D30-400/MB/1500V 400 W 20.40% -0.350 23.6 kg Hotter, heavier, -0.9 pp
LR7-54HJD-510M 510 W 25.00% -0.240 23.5 kg +95 W, cooler, +3.7 pp

Found 1797 panels of the same or similar size to this one, within ±10 mm. See them here Found 1928 panels of the same or similar size to this one, within ±25 mm. See them here Found 3413 panels of the same or similar size to this one, within ±50 mm. See them here Found 4007 panels of the same or similar size to this one, within ±100 mm. See them here

About the JAM54D40 415-440/GB/1500V Series series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

How does the N-type cell technology in the JAM54D40 415-440/GB/1500V series differ from standard PERC modules?
The N-type cells used in the JAM54D40 415-440/GB/1500V series exhibit significantly lower light-induced degradation (LID) compared to P-type PERC cells. In practical terms, the module retains more of its rated power after the initial weeks of operation than PERC counterparts. Module efficiency reaches approximately 22.5%, a level difficult to achieve with standard PERC technology. For the investor, this translates into measurably higher energy yield over the full 30-year linear power warranty period.
How does bifacial technology work in the JAM54D40 415-440/GB series, and does it make sense on a typical sloped residential roof?
Bifacial technology allows JAM54D40 415-440/GB modules to generate electricity from both the front and rear surfaces thanks to the Double Glass construction. Bifaciality is rated at approximately 80%, meaning the rear side can deliver up to 80% of the front-side output. On sloped roofs, rear-side gains are limited due to the close proximity of the roofing surface. However, the Double Glass design still delivers a key benefit: superior resistance to microcracks and chemical corrosion, extending system lifespan in variable Central European climates.
What is the temperature coefficient of the JAM54D40 440W panels and what does it mean for summer performance?
The power temperature coefficient for the JAM54D40 415-440/GB/1500V series is -0.29%/°C. Typical PERC modules reach around -0.35%/°C. In summer, when module temperature climbs to 65°C (40°C above STC), the JAM54D40 loses approximately 11.6% of its rated power, whereas a PERC module would lose around 14%. At 440 Wp, this means roughly 10-11 W more output on a hot day - a difference that adds up to a noticeably higher annual energy yield.
What warranty does the JAM54D40 415-440/GB/1500V series carry and what exactly is covered?
JA Solar provides a 12-year product warranty on the JAM54D40 415-440/GB/1500V series, covering material and manufacturing defects. In addition, a 30-year linear power warranty applies - after 30 years the module retains at least 87.4% of its nominal power. JA Solar holds Bloomberg NEF Tier 1 manufacturer status, which reduces counterparty risk when it comes to honoring warranty claims over the long investment horizon.
Is the JAM54D40 415-440/GB/1500V series compatible with 1000V inverters, or does it require specialized equipment?
The JAM54D40 415-440/GB/1500V series is optimized for 1500V DC systems, but modules can operate in 1000V systems as well - the system designer simply configures shorter strings accordingly. The 1500V standard is most beneficial in commercial and utility-scale PV plants: it allows more modules per string, reducing BoS costs and the number of MPPT inputs required. For residential prosumer installations, standard 1000V inverters are fully compatible with these modules.
What are the dimensions and weight of the JAM54D40 440W panels, and can they be self-installed on a rooftop?
The JAM54D40 415-440/GB/1500V panel measures 1722 × 1134 × 30 mm and weighs approximately 21.5 kg. The Double Glass construction makes it slightly heavier than conventional glass-backsheet modules, which must be accounted for in the structural roof assessment and racking system selection. DIY installation without proper training and certifications is not recommended - correct DC wiring requires qualified electrical credentials, and improper installation may void the product warranty.
Add to compare