Middle of its segment, heavy for its output
The Huayao HYPER N60 series was designed to maximize energy yield under real-world operating conditions - including when the roof has a complex geometry, shade occurs periodically, or the installation operates in varying weather. A key advantage is the use of N-type cells in the TOPCon architecture, which helps minimize losses and maintain stable production over the long term. In practice, this means better investment profitability and reduced sensitivity to typical operational issues.
Another feature of the HYPER N60 is its half-cut design, which improves module performance under partial shading and supports lower resistive losses. The application of multi-busbar technology facilitates better light capture and increases resistance to micro-cracking. For investors, high safety and lamination durability, as well as a favorable performance characteristic at elevated temperatures, are also crucial. This is particularly relevant for rooftop and ground installations during summer months. It is an excellent choice for homes, businesses, and C&I projects where predictable energy yield and long-term reliability are key.
Ranking
Signals from the data
Residential, commercial and shaded-installations.
Weight-limited structures and hot climates.
Bottom 17% of the TOPCon 450-500 W segment, against a median of 52.2.
Bottom 20% of the TOPCon 450-500 W segment, against a median of -0.290.
N-type TOPCon cells exhibit virtually zero LID and full immunity to LeTID - degradation modes common in P-type PERC. Annual degradation is approximately 0.4-0.5%/year vs. 0.6-0.8%/year for PERC, translating into meaningfully higher cumulative energy yield over a 30-year project horizon.
The HYPER N60 efficiency range (22.17-23.09%) clearly outperforms peer comparables Emmvee GRAPHITE (21.03%) and Lina Energy LEPV 132 HC ICON PLUS (21.06%), allowing ~5-10% more installed capacity on the same roof footprint.
The bifacial module construction captures reflected irradiance from the ground surface. With bifaciality typical for TOPCon at 80-85%, and a light-colored ground cover (gravel, snow, concrete), additional energy yield can reach 5-15% over monofacial equivalents, improving overall LCOE.
The manufacturer provides a 30-year linear power warranty alongside a 15-year product warranty. The extended warranty horizon simplifies financial modeling and supports favorable project insurance terms.
Half-cut cell design reduces resistive losses and limits the impact of partial shading on module output. Multi busbar technology shortens current paths and improves resistance to microcracking, extending the effective service life of the laminate.
Huayao does not appear on BloombergNEF's bankable manufacturer lists (Q1 2026 data). For C&I projects financed through bank loans or leasing, this may result in requirements for additional production insurance or outright financing refusal - unlike modules from certified Tier-1 manufacturers such as Jinko, LONGi, or Canadian Solar.
Peer comparable Gokin GK-3-54HGF achieves 24.5% efficiency, approximately 1.4 percentage points above the HYPER N60's peak of 23.09%. On constrained roof areas this gap translates into measurably lower installed capacity within the same module footprint.
- At 22.6% efficiency, this panel is on par with typical TOPCon 450-500W modules
- At 226.3 W/m² power density, roof space requirements are typical for TOPCon 450-500W panels
- Temperature coefficient of -0.30%/°C matches the TOPCon 450-500W median
- At 26.9 kg (2.9 kg above TOPCon 450-500W median of 24.0 kg), requires checking roof load capacity
- Ranked #3679 out of 14129 panels for efficiency in the database
Specifications
Datasheet charts
Measured curves published by Huayao in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 490 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Alternatives
Found 751 panels of the same or similar size to this one, within ±10 mm. See them here Found 760 panels of the same or similar size to this one, within ±25 mm. See them here Found 917 panels of the same or similar size to this one, within ±50 mm. See them here Found 1508 panels of the same or similar size to this one, within ±100 mm. See them here
About the HYPER N60 series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.