Strong in heat, no clear weak spot
The Horay Solar HS 186R-132 TC-D Alpine panel series redefines performance standards through the use of advanced N-Type TOPCon cells. The use of 186R rectangular silicon wafers allows for better utilization of the module surface, which translates into higher power density while maintaining optimal dimensions. The Bifacial Double Glass design makes these panels extremely resistant to potential-induced degradation and atmospheric factors, guaranteeing the longevity of the installation even in difficult climatic conditions. They solve the problem of power losses at high temperatures by offering a low temperature coefficient. Thanks to the ability to generate energy from both sides of the module, the Alpine series is ideal for locations with high albedo, such as roofs covered with light membranes or ground-mounted structures. High efficiency in low light allows for the effective operation of the installation on cloudy days, which is crucial in the Polish latitude. This series is dedicated to demanding investors seeking Premium technology with low annual power degradation. Compared to the competition, Alpine stands out with a reinforced frame and resistance to snow loads, making it a safe choice for installations in mountain regions. It is a solution that combines aesthetics with the uncompromising durability of components.
Ranking
Signals from the data
Hot roofs and southern climates, roofs where every square metre counts and small roofs that need every watt.
Top 9% of the N-type 550-600 W segment, against a median of -0.290. Ranked 1,347th in the whole database.
Top 23% of the N-type 550-600 W segment, against a median of 224.5.
Top 24% of the N-type 550-600 W segment, against a median of 22.45%.
In a direct comparison with peer products (Exiom 21.7%, Fellow Energy 21.7%, Premier Energies 21.67%), the Alpine series outperforms the competition by 0.6-1.4 percentage points in module efficiency. For a typical 10 kWp system, this translates to approximately 0.5-1.2 m² less roof area required to achieve the same nominal system output.
N-type TOPCon cells exhibit LID degradation below 0.3%, while the P-type PERC cells used in peer comparables (Premier Energies) lose 1-2% of power during initial light exposure. The rectangular 186R wafer format improves cell packing density on the module compared to conventional square M10/M12 wafers, directly contributing to higher power output within standard module dimensions.
The dual-glass construction eliminates PID risk and provides superior resistance to moisture, ammonia, and UV versus backsheet-based modules. On installations with ~25% albedo (white TPO membrane, light-colored ground surfaces), the module's rear side can contribute an additional 8-15% energy yield - particularly beneficial for east-west and tracker-mounted systems.
Horay Solar backs the Alpine series with a 30-year linear performance warranty - the longest standard available for N-type TOPCon technology. For reference, peer comparable Premier Energies in the same power class (up to 560 Wp), based on PERC technology, typically carries a 25-year performance warranty.
Horay Solar is listed on the BNEF Tier-1 Module Manufacturers report (Q1 2026), confirming the company's bankability for project financing by banks and infrastructure funds without additional manufacturer-level due diligence. Tier-1 status was first achieved in 2025 - a relatively recent entry, which should be factored into track-record assessments.
The 15-year workmanship warranty is industry-standard, but select premium-segment TOPCon manufacturers (e.g., Sunpro Power) already offer 25-year product warranties. With a 30-year performance guarantee in place, the shorter product warranty period may be material for institutional investors and projects requiring fully aligned warranty coverage throughout the module's operational life.
Horay Solar's annual manufacturing capacity of ~2.5 GW is substantially below industry leaders (JA Solar ~70 GW, Jinko Solar ~85 GW, Longi ~85 GW). Over a 30-year performance warranty horizon, the smaller operational scale raises justified questions about the manufacturer's long-term financial resilience - a relevant factor in LCOE modeling and risk assessment for utility-scale and externally financed projects.
- At 22.7% efficiency, this panel is on par with typical N-type 550-600W modules
- At 226.6 W/m² power density, roof space requirements are typical for N-type 550-600W panels
- At -0.28%/°C, hot weather performance is typical for N-type 550-600W panels
- 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces
- Ranked #3364 out of 14129 panels for efficiency in the database
Specifications
Datasheet charts
Measured curves published by Horay Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 550 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Alternatives
Found 15 panels of the same or similar size to this one, within ±10 mm. See them here Found 21 panels of the same or similar size to this one, within ±25 mm. See them here Found 520 panels of the same or similar size to this one, within ±50 mm. See them here Found 879 panels of the same or similar size to this one, within ±100 mm. See them here
About the HS 186R-132 TC-D Alpine series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.