Middle of its segment, needs the roof space
The Hanersun HiTouch 5N series is an advanced solution based on N-type TOPCon cell technology, which redefines efficiency standards in modern photovoltaics. Thanks to the SMBB (Super Multi-Busbar) design, these panels offer significantly better current flow and higher resistance to micro-cracks, which directly translates into the longevity of the installation. A key benefit for the investor is the exceptionally low power degradation rate, ensuring that the modules maintain high efficiency even after many years of intensive operation in varying weather conditions. This series effectively solves the problem of yield drops on hot days thanks to an optimized temperature coefficient, clearly distinguishing it from traditional older generation modules. HiTouch 5N also features excellent low-light performance, generating energy more efficiently on cloudy days as well as during morning and evening hours. It is an ideal choice for both demanding residential prosumers and large commercial farms, where achieving the lowest cost of energy production is key. The robust construction of the modules guarantees increased mechanical resistance to extreme snow and wind loads, making them a reliable foundation for any modern solar power plant.
Ranking
Signals from the data
Residential, commercial, utility-scale and hot-climate.
Roofs where every square metre has to count, tight roof space and hot climates.
Bottom 5% of the TOPCon 450-500 W segment, against a median of 225.2. Ranked 8,195th in the whole database.
Bottom 5% of the TOPCon 450-500 W segment, against a median of 22.52%. Ranked 8,240th in the whole database.
Bottom 6% of the TOPCon 450-500 W segment, against a median of -0.290. Ranked 8,005th in the whole database.
N-type TOPCon cells exhibit near-zero light-induced degradation (LID/LeTID), resulting in an annual degradation rate of approximately 0.4% compared to ~0.55% typical of PERC modules. The SMBB (Super Multi-Busbar) design further reduces series resistance and the risk of microcracks, extending the system's service life.
The maximum module efficiency of 22.65% is on par with the top peer comparable Q-SUN Solar Qrystal N8 (22.65%) and surpasses the Risen RSM144-9-560-585BNDG (22.6%). The Pmax temperature coefficient of -0.31%/°C limits power output losses on hot days compared to PERC modules (~-0.35%/°C).
Hanersun Energy earned Top Performer recognition in both the 10th and 11th editions of the Kiwa PVEL PV Module Reliability Scorecard — an independent module reliability assessment. The company is among the few manufacturers outside the top ten by market share to hold this distinction for two consecutive years, confirming consistent production quality.
The best variants in the series offer a 30-year linear power warranty maintaining >80% of nominal power output, backed by a 15-year product warranty. Standard mid-tier peer comparables typically operate at 25 years / 84.8% — the extended warranty horizon lowers LCOE in projects with long financing tenors.
The modules are certified for a 5,400 Pa static front-side load, meeting the requirements of Snow Load Zone IV per PN-EN 1991-1-3 and extreme wind exposure categories. This qualifies the modules for installation in challenging locations without additional structural reinforcement.
According to the contextual data (`tier_1_bankable: false`), the series does not currently hold BNEF Tier 1 bankable status. This may be a limiting factor in commercial projects financed through non-recourse project finance, where lenders typically require modules from manufacturers with an active BNEF Tier 1 status.
The HiTouch 5N series in its monofacial configuration (`is_bifacial: false`) does not generate energy from the module's rear side. The peer comparable Risen RSM144-9-560-585BNDG is available in a bifacial version, enabling an additional yield of 5–25% at ground albedo >20% (e.g., light gravel, snow), which is relevant for ground-mounted commercial installations.
The product warranty period of 12–15 years varies by specific variant. Models at the lower threshold of 12 years fall below the 15-year standard established by premium manufacturers (e.g., REC, Panasonic). When selecting a variant within this series, buyers should verify which option carries the full 15-year product warranty — a material consideration for projects with long financing horizons.
- Efficiency of 21.5% is 1.1pp below the TOPCon 450-500W median (22.5%)
- Power density of 214.7 W/m² is 10.5 W/m² below TOPCon 450-500W median (225.2 W/m²) - needs more roof space
- Temperature coefficient of -0.31%/°C is 0.02pp worse than TOPCon 450-500W median (-0.29%/°C) - higher losses in summer heat
- At 25.5 kg, this panel is 1.5 kg heavier than the TOPCon 450-500W median (24.0 kg) - more demanding for installation crews
- 82% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces
Specifications
Datasheet charts
Measured curves published by Hanersun in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 465 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Found 751 panels of the same or similar size to this one, within ±10 mm. See them here Found 755 panels of the same or similar size to this one, within ±25 mm. See them here Found 1049 panels of the same or similar size to this one, within ±50 mm. See them here Found 1503 panels of the same or similar size to this one, within ±100 mm. See them here