Skip to main content
Gamko New Energy GKA182N132-530W
Gamko New Energy Brand review

GKA182N132-530W

530 Wp TOPCon Bifacial 2500%
ComparePV verdict

Light for its output, weak in heat

Rank 6,249 of 14,129
Compare panels Datasheet PDF
Power (Wp)
530
Strong · top 15%
Efficiency (%)
22.32
Weak · bottom 22%
Density (Wp/m²)
223.2
Weak · bottom 21%
Temp (%/°C)
-0.300
Weak · bottom 21%
Weight (kg)
23.0
Strong · 4.0 kg below median
Warranty (yrs)
30
Typical · median 30 yrs

The Gamko GKA182N132 photovoltaic panel series utilizes innovative N-type TOPCon cell technology, placing it at the forefront of solutions in terms of efficiency and durability. The use of large 182 mm silicon wafers combined with a half-cut design significantly reduces resistance losses, which translates into stable module operation even in difficult lighting conditions typical for the Polish climate. A key advantage of this series is its exceptionally low temperature coefficient, thanks to which the panels maintain high efficiency on hot days when traditional modules lose power. The use of N-type cells effectively eliminates the problem of light-induced degradation (LID), guaranteeing investors a longer lifespan and higher energy yields over decades of operation. This solution is dedicated primarily to large commercial installations and demanding prosumers looking for an optimal balance between modern technology and a fast return on investment. The solid frame construction ensures high resistance to mechanical loads, such as heavy snow or strong wind, making the GKA182N132 series a safe choice for rooftop and ground-mounted farms. Thanks to precise quality control, these panels offer consistent parameters, which sets them apart from standard products available on the market.

Ranking

435 panels in the segment TOPCon 500-550 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.32% 22.74% Weak · bottom 22% 5,128
Power density 223.2 227.4 Weak · bottom 21% 5,112
Temperature coefficient -0.300 -0.290 Weak · bottom 21% 6,152
Weight per kWp 43.4 52.4 Strong · top 2% 296
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

6 positive · 4 caution
Best for

Commercial, residential and shaded-installations.

Not ideal for

Hot climates, roofs where every square metre has to count and tight roof space.

Strengths
43.4 kg per kWp

Top 2% of the TOPCon 500-550 W segment, against a median of 52.4. Ranked 296th in the whole database.

Watch-outs
-0.300 %/°C temperature coefficient

Bottom 21% of the TOPCon 500-550 W segment, against a median of -0.290.

223.2 watts per square metre

Bottom 21% of the TOPCon 500-550 W segment, against a median of 227.4.

22.32% module efficiency

Bottom 22% of the TOPCon 500-550 W segment, against a median of 22.74%.

What owners get
Premium-Class Efficiency: Up to 23.16%

The top-tier variant in this series achieves 23.16% module efficiency, while directly comparable products - Goldi Solar GS10-B144-TF, IBC Solar 182M, and S-Energy SL65-72BGJ - top out at 21.3%. The ~1.86 percentage-point advantage translates into meaningfully higher energy yield from the same roof or ground area.

N-Type TOPCon Technology - No LID Effect

N-type TOPCon cells eliminate light-induced degradation (LID), which in legacy PERC modules can cause up to 2-3% power loss during the first months of operation. The lower temperature coefficient inherent to this technology also ensures higher power output on hot days, which is particularly relevant during summer generation peaks in Poland.

Bifacial Design - Additional Yield from the Rear Side

The bifacial construction enables absorption of irradiance reflected from the ground surface. In ground-mounted installations with a light-colored substrate or snow cover, this can increase annual energy yield by 5-15% compared to a monofacial module of equivalent STC power rating.

30-Year Power Output Warranty

The manufacturer provides a 30-year performance warranty, exceeding the 25-year standard offered by most peers in this price class (Goldi Solar, S-Energy). For commercial installations with longer financing horizons, this represents a significant advantage in LCOE analysis.

High Mechanical Load Ratings: 5400 Pa Snow / 2400 Pa Wind

Certified mechanical load ratings per IEC 61215 (5400 Pa snow, 2400 Pa wind) make this series well suited for Polish climatic conditions, including mountainous regions with heavy snowfall, without requiring additional structural reinforcements.

Trade-offs
No Tier 1 Status on BNEF / Wood Mackenzie Lists

Gamko New Energy (annual production capacity ~1.2 GW as of 2023 data) does not appear on the BloombergNEF Tier 1 or Wood Mackenzie H1 2025/Q1 2026 module lists, which serve as the reference standard for institutions financing utility-scale PV projects. This may complicate or preclude bank financing for larger commercial installations that require a bankable equipment list.

Notes from the database
  • At 22.3% efficiency, this panel is on par with typical TOPCon 500-550W modules
  • 223.2 W/m² power density is 4.2 W/m² below TOPCon 500-550W median (227.4 W/m²) - requires larger installation area
  • At -0.30%/°C, hot weather performance is typical for TOPCon 500-550W panels
  • 23.0 kg weight - 4.0 kg lighter than TOPCon 500-550W median (27.0 kg), reducing installation effort
  • In the top 36% for efficiency among all TOPCon panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 530 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.32 % Weak Segment median 22.74%
Vmpp · Impp 39.70 V · 13.35 A Operating point at max power
Voc · Isc 47.41 V · 14.28 A Sizes the string length
Dimensions 2094×1134×30 mm · 2.37 m² of roof
Weight 23.0 kg Strong Strong · 4.0 kg below median
Cells 132 · TOPCon Monocrystalline
Bifaciality 2500 % Rear output as a share of front
Coefficient Pmax -0.300 %/°C Weak bottom 21% of its segment
Coefficient Voc · Isc -0.250 · 0.046 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 463 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Gamko New Energy in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 530 Wp appear here. The rest cover the whole series.

I-V Curve vs Irradiance (Cell Temp = 25°C) I-V Curve vs Irradiance (Cell Temp = 25°C) Whole series I-V Curve vs Cell Temperature (1000 W/m²) I-V Curve vs Cell Temperature (1000 W/m²) Whole series

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.300 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Gamko New Energy GKA182N132-530W 530 W 22.32% -0.300 23.0 kg You are here
LR7-54HJD-510M 510 W 25.00% -0.240 23.5 kg -20 W, cooler, +2.7 pp
AIKO-A495-MCE54Mw 495 W 24.80% -0.260 21.0 kg -35 W, cooler, +2.5 pp
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg +30 W, cooler, +2.5 pp
LR7-54HJD-505M 505 W 24.70% -0.240 23.5 kg -25 W, cooler, +2.4 pp
WST-505BKX54-A2 505 W 24.70% -0.260 25.0 kg -25 W, cooler, +2.4 pp
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg +25 W, cooler, +2.3 pp
AIKO-A490-MCE54Mw 490 W 24.50% -0.260 21.0 kg -40 W, cooler, +2.2 pp
GKA182M132S-485 485 W 20.42% -0.360 23.0 kg -45 W, hotter, -1.9 pp
GKA182M132S-490 490 W 20.64% -0.360 23.0 kg -40 W, hotter, -1.7 pp
GKA182M132S-495 495 W 20.85% -0.360 23.0 kg -35 W, hotter, -1.5 pp
GKA182M132S-500 500 W 21.06% -0.360 23.0 kg -30 W, hotter, -1.3 pp
GKA182M132S-505 505 W 21.27% -0.360 23.0 kg -25 W, hotter, -1.1 pp
GKA120N-PRO-590W 590 W 23.82% -0.300 26.7 kg +60 W, heavier, +1.5 pp
GKA120N-PRO-585W 585 W 23.62% -0.300 26.7 kg +55 W, heavier, +1.3 pp
BGO 580 580 W 23.50% -0.290 26.0 kg +50 W, heavier, +1.2 pp
GKA120N-PRO-580W 580 W 23.42% -0.300 26.7 kg +50 W, heavier, +1.1 pp

Found 405 panels of the same or similar size to this one, within ±10 mm. See them here Found 416 panels of the same or similar size to this one, within ±25 mm. See them here Found 433 panels of the same or similar size to this one, within ±50 mm. See them here Found 961 panels of the same or similar size to this one, within ±100 mm. See them here

About the GKA182N132 series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

What warranty does the Gamko GKA182N132 series carry and what does it cover?
The GKA182N132 series comes with a 12-year product warranty covering material and workmanship defects, along with a 30-year power output warranty. The manufacturer guarantees that after 30 years of operation the module will retain at least 87.4% of its nominal power. N-type TOPCon cell technology effectively eliminates LID degradation, so real-world energy yields remain more stable throughout the entire warranty period compared to legacy P-type cells.
What does it mean that the Gamko GKA182N132 is bifacial, and does it make sense for a rooftop installation?
A bifacial module harvests light through both its front and rear cell surfaces. On a pitched roof the rear-side gain is limited and depends on the albedo of the underlying surface, but in ground-mounted systems or over high-reflectivity substrates it can contribute an additional 5-15% of energy yield. For rooftop installations, the primary benefit of bifaciality in this module lies in the inherently higher cell efficiency of N-type TOPCon technology, which reaches 23.16% for this module.
Can the Gamko GKA182N132 550 W modules handle heavy snow loads typical in Poland?
Yes. The GKA182N132 module is certified for a snow load of 5,400 Pa and a wind load of 2,400 Pa. Polish standards for snow loads typically range from 1,000 to 2,000 Pa depending on the climatic zone, so the module exceeds those requirements with a substantial safety margin. The anodized aluminum frame and 3.2 mm tempered glass ensure structural integrity throughout the entire service life.
Does TOPCon technology in the GKA182N132 series genuinely deliver better performance on overcast days?
Yes. N-type TOPCon cells exhibit higher sensitivity to diffuse irradiance than conventional PERC cells. In typical Polish conditions-characterized by frequent cloud cover-this means the module generates proportionally more energy than older technologies of comparable nominal power. In addition, the exceptionally low temperature coefficient ensures that on hot days the GKA182N132 suffers less power loss than P-type modules.
What types of installations is the Gamko GKA182N132 550 Wp series best suited for?
The GKA182N132 550 Wp series is primarily designed for large commercial installations, utility-scale ground-mounted solar farms, and industrial applications where a high per-module power rating reduces BoS costs, including mounting hardware and cabling. The module's physical dimensions (2,094 × 1,134 mm) require appropriately engineered racking structures. Demanding prosumers with large roof surfaces or land available can also deploy this series successfully, achieving a faster return on investment.
How does the Gamko GKA182N132 differ from this manufacturer's older M-type (PERC) models?
The fundamental difference is cell technology: the GKA182N132 uses N-type TOPCon cells, whereas older Gamko series (e.g., GKA182M132) are based on P-type PERC cells. N-type cells offer higher efficiency (up to 23.16% vs. approximately 21% for PERC), zero LID degradation, and a superior temperature coefficient. This translates into higher annual energy yields and greater long-term power stability over a 30-year operating lifetime.
Add to compare