Skip to main content

DAS-DH108NA-420

420 Wp TOPCon Bifacial 80%
ComparePV verdict

Middle of its segment, modest efficiency

Rank 8,653 of 14,005
Compare panels Datasheet PDF
Power (Wp)
420
Weak · bottom 16%
Efficiency (%)
21.50
Weak · bottom 17%
Density (Wp/m²)
215.1
Weak · bottom 19%
Temp (%/°C)
-0.300
Typical · median -0.290
Weight (kg)
23.7
Weak · 1.7 kg above median
Warranty (yrs)
30
Typical · median 30 yrs

The DAS Solar DAON mini Bifacial Double Glass Module series is an advanced solution based on N-type TOPCon cell technology, setting new efficiency standards in the compact module segment. Thanks to its glass-glass construction, these panels feature extreme resistance to external factors and degradation, making them an ideal choice for the Polish climate. Bifacial module activity allows for the efficient use of reflected light, significantly increasing total energy production compared to monofacial counterparts. A key differentiator of the series is its optimized dimensions and low weight, which solves the problem of installation on roofs with limited load-bearing capacity or complex geometry. DAS Solar DAON mini also offers exceptional performance under low light conditions, resulting in longer system operating times throughout the day. Unlike standard products, this series has a very low annual degradation rate, guaranteeing financial security and a fast return on investment for investors. This product is designed for demanding residential users who do not want to choose between aesthetics and the ultimate durability of double glass technology, while maintaining maximum power density from the available space.

Ranking

1,218 panels in the segment TOPCon 400-450 W
Metric This panel Median Position in segment Overall rank
Module efficiency 21.50% 22.00% Weak · bottom 17% 7,958
Power density 215.1 220.2 Weak · bottom 19% 7,882
Temperature coefficient -0.300 -0.290 Typical 6,093
Weight per kWp 56.4 51.4 Weak · bottom 18% 10,649
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 5 caution
Best for

Residential and shaded-installations.

Not ideal for

Tight roof space, weight-limited structures and roofs where every square metre has to count.

Watch-outs
21.50% module efficiency

Bottom 17% of the TOPCon 400-450 W segment, against a median of 22.00%.

56.4 kg per kWp

Bottom 18% of the TOPCon 400-450 W segment, against a median of 51.4.

215.1 watts per square metre

Bottom 19% of the TOPCon 400-450 W segment, against a median of 220.2.

What owners get
N-type TOPCon – Low Degradation and High Efficiency

N-type TOPCon cells exhibit an annual degradation rate of ~0.4% (from year 2 onward), which is lower than the ~0.55% typical of the P-type PERC cells used in the comparable Hyundai DG G12 PERC Shingled. The manufacturer guarantees ≥87.4% power output after 30 years, and the series reaches an efficiency of 21.8%, marginally outperforming peer comparables (Hyundai 21.4%, Trina Vertex S 21.3%, Tongwei TERRA 5K 21.4%).

30-Year Linear Power Warranty

While Trina Solar Vertex S and Tongwei TERRA 5K standardly offer a 25-year power warranty (down to ~84.8%), DAS Solar DAON mini guarantees ≥87.4% output over 30 years. The additional 5-year warranty extension at a higher power threshold translates into a measurably higher cumulative energy yield over a long investment horizon.

Bifacial Glass-Glass Construction

The dual-glass design eliminates the risk of PID degradation and moisture ingress, extending module service life beyond the standard 25 years. Bifaciality delivers an additional yield gain of 5–15% from reflected irradiance (particularly advantageous in the Polish climate due to snow cover and light-colored surfaces), representing a clear advantage over monofacial equivalents in this power class.

Mini Format – Installation on Challenging Roofs

Built on 108 half-cut cells (vs. 144 in standard large-format modules), the series offers lower weight and reduced dimensions, directly addressing the challenge of mounting on roofs with limited load-bearing capacity or irregular geometry. This is a tangible advantage over the larger utility-class modules used by some competing manufacturers.

Confirmed BNEF Tier-1 Status

DAS Solar has appeared on the BloombergNEF Tier-1 bankable manufacturers list for several consecutive quarters (confirmed Q1 2026), ranking as the 9th largest global module supplier in 2024 and the 2nd largest TOPCon manufacturer in the world. This status is required by financing institutions for PV installations and reduces project risk.

Trade-offs
Financial Losses and Ownership Uncertainty

DAS Solar reported significant net losses in 2024 and warned of their continuation into 2025 (margin pressure, inventory write-downs). In January 2026, exclusive negotiations were announced with TCL Zhonghuan regarding the acquisition of a controlling stake. The ownership change and ongoing losses represent a real risk to the fulfillment of 25–30-year warranty obligations by the current legal entity.

Limited Operating History (est. 2018)

DAS Solar has only 6–7 years of manufacturing history, compared to Trina Solar (est. 1997) or Hyundai Energy Solutions, which have extensive, verifiable field installation portfolios. The stated degradation rate of 0.4%/year for N-type TOPCon is technically well-founded, but has not yet been confirmed by long-term real-world data from DAS Solar's own products.

Notes from the database
  • At 21.5% efficiency, this panel is on par with typical TOPCon 400-450W modules
  • Power density of 215.1 W/m² is 5.1 W/m² below TOPCon 400-450W median (220.2 W/m²) - needs more roof space
  • At -0.30%/°C, hot weather performance is typical for TOPCon 400-450W panels
  • At 23.7 kg (1.7 kg above TOPCon 400-450W median of 22.0 kg), requires checking roof load capacity
  • Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof

Specifications

Open datasheet PDF
Nominal power (Pmax) 420 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 21.50 % Weak Segment median 22.00%
Vmpp · Impp 32.02 V · 13.12 A Operating point at max power
Voc · Isc 38.48 V · 13.78 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 1722×1134×30 mm · 1.95 m² of roof
Weight 23.7 kg Weak Weak · 1.7 kg above median
Cells 108 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.300 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
NOCT 42 °C At 800 W/m², 20 °C ambient
Product warranty 25 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 367 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by DAS Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 420 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.300 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
DAS Solar DAS-DH108NA-420 420 W 21.50% -0.300 23.7 kg You are here
JST-EDMH-(445-465)W-TD (465W class) 465 W 23.81% -0.300 20.5 kg +45 W, lighter, +2.3 pp
LX-465M/182R-96+ GG 465 W 23.80% -0.260 23.5 kg +45 W, cooler, +2.3 pp
SPR-MAX7-470 470 W 23.70% -0.270 21.1 kg +50 W, +2.2 pp, +10 yr warranty
AIKO-A470-MAH54Mb 470 W 23.60% -0.260 21.5 kg +50 W, cooler, +2.1 pp
AIKO-A460-MAH54Mb 460 W 23.60% -0.290 20.5 kg +40 W, lighter, +2.1 pp
HSM-BD54-LA470 470 W 23.60% -0.260 21.5 kg +50 W, cooler, +2.1 pp
DAS-DH108NA-410W 410 W 21.00% -0.300 23.7 kg -10 W, -0.5 pp
DAS-DH108NA-415W 415 W 21.30% -0.300 23.7 kg Very close match
DAS-DH108NA-425W 425 W 21.80% -0.300 20.5 kg Lighter, +0.3 pp
DAS-DH108NA-430W 430 W 22.00% -0.300 20.5 kg +10 W, lighter, +0.5 pp
LR7-54HJD-510M 510 W 25.00% -0.240 23.5 kg +90 W, cooler, +3.5 pp
AIKO-A495-MCE54Mw 495 W 24.80% -0.260 21.0 kg +75 W, cooler, +3.3 pp
LR7-54HJD-505M 505 W 24.70% -0.240 23.5 kg +85 W, cooler, +3.2 pp
AIKO-A490-MCE54Mw 490 W 24.50% -0.260 21.0 kg +70 W, cooler, +3.0 pp
LR7-54HJD-500M 500 W 24.50% -0.240 23.5 kg +80 W, cooler, +3.0 pp
CIPRO-TN9C54M-500W 500 W 24.50% -0.260 21.4 kg +80 W, cooler, +3.0 pp

Found 1783 panels of the same or similar size to this one, within ±10 mm. See them here Found 1914 panels of the same or similar size to this one, within ±25 mm. See them here Found 3392 panels of the same or similar size to this one, within ±50 mm. See them here Found 3970 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
Are the DAS Solar DAON mini Bifacial panels suitable for roofs with limited load-bearing capacity?
Yes, the DAON mini series was specifically designed for installations on roofs with complex geometry or low structural load capacity. The compact dimensions and optimized module weight simplify on-roof transport and make installation on lighter substructures more practical. This is one of the key differentiators of this series compared to standard, heavier 72-cell modules.
What warranty is offered on the DAS Solar DAON mini Double Glass panels?
The DAON mini series is covered by a 25-year product warranty (covering material and workmanship defects) and a 30-year linear power output warranty. This means the manufacturer guarantees a specified minimum energy production level for three decades. Such an extended power warranty is the industry standard for glass-glass modules based on N-type TOPCon technology, which exhibits exceptionally low annual degradation rates.
What is TOPCon technology and why should I choose it in the DAS Solar DAON mini panels?
TOPCon (Tunnel Oxide Passivated Contact) is an N-type cell technology that delivers higher efficiency and lower annual degradation than the widely used P-type PERC cells. In practice, this translates into greater energy yield from the same roof area and a slower decline in power output over time. For DAS Solar DAON mini modules, annual degradation after the first year is typically around 0.4%, resulting in a better return on investment throughout the full 30-year operational lifetime.
Does the bifacial DAS Solar DAON mini module generate more energy in the Polish climate?
Yes, although the rear-side gain depends on the type of surface beneath the array. In Poland, the greatest benefits are achieved in ground-mounted installations over light-colored gravel or snow cover, where the albedo coefficient can reach 80–90%. On roofs covered with dark tiles the bifacial gain is lower; however, the glass-glass construction still provides longer service life and superior resistance to the weather conditions typical of the Polish climate.
What is the peak power output of the DAS Solar DAON mini panels and how many modules do I need for a 10 kWp installation?
The peak power output of a single DAON mini module is 425 Wp. To build a 10 kWp system, approximately 24 panels from this series are therefore required. Thanks to the module's compact form factor, this number of panels can fit even on roofs with a smaller available area while maintaining a high power density per square meter.
Do the DAS Solar DAON mini panels perform well under cloudy conditions and low irradiance?
Yes, one of the primary advantages of the N-type TOPCon technology used in the DAON mini series is its high performance under diffuse and low-light conditions. The modules generate more energy on overcast days and during low-sun periods than their P-type PERC counterparts. This translates into a longer effective daily generation window and higher annual energy yield in the Polish climate.
Add to compare