Skip to main content
SUN2000-100KTL-M1 (@480 V) vs SE100K (Synergy, 380/400V) 6 of 16 identical Swap Change inverters

Huawei SUN2000-100KTL-M1 (@480 V) vs SolarEdge SE100K (Synergy, 380/400V)

Huawei SUN2000-100KTL-M1 (@480 V)
Huawei
SUN2000-100KTL-M1 (@480 V)
100 kW 98.6 % euro Grid-tie
Open inverter page Datasheet PDF
VS
SolarEdge SE100K (Synergy, 380/400V)
SolarEdge
SE100K (Synergy, 380/400V)
100 kW 98.0 % euro Grid-tie
Open inverter page Datasheet PDF
The verdict

SUN2000-100KTL-M1 (@480 V) leads on the differences that matter

The largest is european efficiency: 0.6 pp more efficient. 6 of 16 comparable parameters are identical, with 16 more left out because at least one datasheet does not publish them.

See all 10 differences
How alike are they
6 of 16 comparable
parameters are identical
identical differs not published
01

What actually differs

10 of 16 parameters
Parameter SUN2000-100KTL-M1 (@480 V) SE100K (Synergy, 380/400V) Difference
European efficiency 98.6 % 98.0 % 0.6 pp more efficient
Max DC voltage 1100 V 1000 V 100 V apart
Max AC power 110.00 kW 100.00 kW 10.00 kW apart
Weight 90.0 kg 32.0 kg 58.0 kg lighter
Max efficiency 98.8 % 98.3 % 0.5 pp more efficient
Weight per kW 0.9 kg/kW 0.3 kg/kW 0.6 kg/kW lighter
Max AC current 133.7 A 145.0 A 11.3 A apart
Ingress protection IP66 IP65 IP66 vs IP65
MPPT voltage range 200-1000 V 680-1000 V 200-1000 V vs 680-1000 V
Dimensions 700x1035x365 mm 558x328x273 mm 700x1035x365 mm vs 558x328x273 mm
02

Full specification

Parameter SUN2000-100KTL-M1 (@480 V) SE100K (Synergy, 380/400V) Difference
AC output
Rated AC power 100.00 kW 100.00 kW Same
Max AC power 110.00 kW 100.00 kW 10.00 kW apart
Grid connection 3-phase 3-phase Same
Nominal AC voltage - 400 V Not published by Huawei
Max AC current 133.7 A 145.0 A 11.3 A apart
PV input
Max PV power - 175.00 kW Not published by Huawei
DC/AC ratio - 1.75 Not published by Huawei
Max DC voltage 1100 V 1000 V 100 V apart
MPPT voltage range 200-1000 V 680-1000 V 200-1000 V vs 680-1000 V
Start voltage 200 V - Not published by SolarEdge
MPP trackers 10 - Not published by SolarEdge
Strings per tracker 2 - Not published by SolarEdge
Max input current per tracker 26.0 A - Not published by SolarEdge
Efficiency
European efficiency 98.6 % 98.0 % +0.6 pp for SUN2000-100KTL-M1 (@480 V)
Max efficiency 98.8 % 98.3 % +0.5 pp for SUN2000-100KTL-M1 (@480 V)
CEC efficiency - - Neither datasheet publishes this
Battery
Battery input - - Neither datasheet publishes this
Battery voltage - - Neither datasheet publishes this
Max charge current - - Neither datasheet publishes this
Backup power - - Neither datasheet publishes this
Physical
Weight 90.0 kg 32.0 kg -58.0 kg for SE100K (Synergy, 380/400V)
Weight per kW 0.9 kg/kW 0.3 kg/kW -0.6 kg/kW for SE100K (Synergy, 380/400V)
Dimensions 700x1035x365 mm 558x328x273 mm 700x1035x365 mm vs 558x328x273 mm
Ingress protection IP66 IP65 IP66 vs IP65
Cooling forced-air forced-air Same
Noise - 67 dB Not published by Huawei
Max operating temperature 60 °C 60 °C Same
Connectivity and safety
Wi-Fi Yes Yes Same
Ethernet - Yes Not published by Huawei
Arc fault protection - Yes Not published by Huawei
Integrated DC switch Yes Yes Same
Warranty
Warranty - 20 yrs Not published by Huawei
03

More useful comparisons

Open all inverters
Same type, similar size
Huawei
Huawei SUN2000-100KTL-M1 (@480 V) vs Huawei SUN2000-100KTL-M2
3 differences, the largest is max input current per tracker
Same type, similar size
Sungrow
Huawei SUN2000-100KTL-M1 (@480 V) vs Sungrow SG110CX
5 differences, the largest is max ac current
Same type, similar size
SMA Solar
Huawei SUN2000-100KTL-M1 (@480 V) vs SMA Solar Sunny Highpower PEAK3 SHP 100-21
8 differences, the largest is mpp trackers
04

Written summary

Every figure here is from the manufacturers' own datasheets - a dash means the value is not published, never an estimate.