Skip to main content

ASM vs Lexron - solar panel manufacturer comparison

ASM
Australia Founded 2009
Read the ASM review
VS
Lexron
Turkey Founded 2010
Read the Lexron review
At a glance

Lexron has the broader catalog (12 vs 1 models). Lexron leads on peak efficiency at 23.23%.

Both catalogues are read from the manufacturers' own datasheets. A brand is not scored against the market here, only against the other brand on this page.

Panel models
1 12
Highest power
170 Wp 600 Wp
Best efficiency
16.0% 23.2%
Average efficiency
16.0% 21.9%
Bifacial share
0% 0%
Average warranty
- 30 yrs
01

The two companies

Company facts, not datasheet figures
ASM

Australian Solar Manufacturing (ASM) is a small Australian solar panel assembler that produces crystalline monocrystalline modules domestically using components sourced from Germany, Japan, the USA, and China. The company focuses on providing locally assembled PV modules tailored to Australian conditions, supporting...

Founded
2009
Headquarters
Hallam, Victoria, Australia
Employees
1-10
Lexron

Lexron is a solar panel brand of ACS Enerji ve Teknoloji, a Turkish manufacturer and distributor based in Izmir. The company produces mono- and polycrystalline solar panels ranging from small off-grid modules to large half-cut PERC modules, alongside inverters, batteries, and charge controllers. It primarily serves...

Founded
2010
Headquarters
Izmir, Turkey
Employees
50-200
02

Catalogue against catalogue

Averages over every model in the database
Metric ASM Lexron
Catalog & Power
Panel Models 1 12+11
Max Power 170 W 600 W+430 W
Avg Power 170 W 502 W+332 W
Efficiency
Max Efficiency 16.00% 23.23%+7.23 pp
Avg Efficiency 16.00% 21.87%+5.87 pp
Reliability & Warranty
Avg Temp Coefficient -0.438%/°C -0.350%/°C+0.088
Bifacial Share 0 (0%) 0 (0%)
Avg Warranty - 30.0 yrs

An average over a catalogue describes the range a manufacturer publishes, not the module you would buy. A brand with two flagship panels and eighty older ones averages worse than one that has retired its back catalogue.

03

What each of them builds

Cell technology across the market
Efficiency spread
Share of each catalogue in every efficiency band

Lexron skews to higher efficiency: 17% of lineup is 23%+

Power spread
Share of each catalogue in every power band

Lexron offers more 600W+ panels (8% of lineup)

ASM cell technology
Share of their models by cell architecture
Lexron cell technology
Share of their models by cell architecture

Dominant cell tech: <strong>PERC</strong> (50%)

04

The flagships

Highest-power models from each brand
05

Written summary

Checking cache...

ASM (Australian Solar Manufacturing Pty Ltd) is an Australian company founded in 2009 and headquartered in Australia. Rather than manufacturing photovoltaic cells itself, ASM specialises in domestic panel assembly using components sourced from Germany, Japan, the United States, and China. Its catalog has historically focused on monocrystalline modules in the 170-200 Wp range, positioning it as a niche, locally assembled brand rather than a volume producer. ASM does not appear on BloombergNEF Tier 1 lists, and no independent source confirmed a bankability rating for it. Lexron is the solar panel brand of ACS Enerji, a Turkish company established in 2015 and based in Izmir. ACS Enerji has expanded its range significantly and now offers N-Type TOPCon modules alongside older monocrystalline and polycrystalline lines, with the newer models reaching output ratings in the 680-700 W range. Neither brand carries confirmed Tier 1 status, but Lexron has a broader distribution footprint within Turkey and the surrounding regional market, giving it the larger institutional presence of the two.

On the product side, ASM's assembled panels are primarily suited to residential and small commercial rooftop installations in Australia, where the locally assembled provenance carries regulatory and supply-chain appeal. The power classes covered are relatively modest by 2025 standards, and no TOPCon or HJT line was confirmed by available sources. Lexron, under ACS Enerji, markets modules for a wider range of applications - residential rooftops, commercial systems, agriculture, and grid-connected plants - and its adoption of TOPCon cell technology in newer models brings it closer to the mainstream global product tier.

For a typical buyer in 2025, neither brand is an obvious default outside its home market. ASM makes sense for Australian buyers who specifically want a domestically assembled product and value the associated local warranty support, but its limited power range and small production scale are real constraints. Lexron offers more current cell technology and broader product choice, but the lack of Tier 1 bankability and reported logistics concerns around panel breakage during shipping mean buyers outside Turkey should verify local distribution and warranty support before committing. If either criterion - local assembly or modern cell technology - is not a deciding factor, buyers would be better served by a globally bankable Tier 1 brand.

Generated by Claude Sonnet · 2026-06-09

06

Other brand comparisons

Build your own
Manufacturers
ASM A.B. Energy
Manufacturers
AE Solar Lexron
Manufacturers
ASM AEET
Manufacturers
AIKO Lexron
Manufacturers
ASM AKCOME
Manufacturers
ARTsolar Lexron
Something missing from a catalogue? Both lists are built from the datasheets in the database. If a model is absent, it has not been ingested yet.

Comparisons are computed from manufacturer datasheets held in the ComparePV database and may not reflect a brand's complete current lineup. Nothing on this page is paid placement.