Skip to main content
HY SOLAR HY-NT10/54GDF-465W
HY SOLAR Brand review

HY-NT10/54GDF-465W

465 Wp TOPCon Bifacial 80%
ComparePV verdict

Efficiency leader, no clear weak spot

Rank 6,863 of 14,005
Compare panels Datasheet PDF
Power (Wp)
465
Typical for its class
Efficiency (%)
23.30
Strong · top 9%
Density (Wp/m²)
232.7
Strong · top 10%
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
24.5
Typical · median 24.0 kg
Warranty (yrs)
30
Typical · median 30 yrs

The HY SOLAR HY-NT10/54GDF series is a double-sided N-type TOPCon module that effectively increases energy yield not only from the front, but also from reflected light from the ground. This makes it ideal for locations where maximum power generation from a limited area is crucial, such as rooftops of homes and businesses, carports, and ground-mounted installations. The use of SMBB and half-cut cell technology improves performance under partial shading and reduces losses due to internal resistance, resulting in more stable generation under typical, variable conditions in Poland. The modules also stand out due to high PID resistance, which is important for long-term operation, and good performance at high temperatures, which helps maintain efficiency on hot days. The entire system is complemented by a long, multi-year warranty, which is important for investors who expect predictability and security in their projects. Compared to many competing PERC panels, this series offers a more modern cell architecture and better performance in low-light conditions.

Ranking

1,089 panels in the segment TOPCon 450-500 W
Metric This panel Median Position in segment Overall rank
Module efficiency 23.30% 22.52% Strong · top 9% 1,017
Power density 232.7 225.2 Strong · top 10% 1,115
Temperature coefficient -0.290 -0.290 Typical 2,165
Weight per kWp 52.7 52.2 Typical 6,318
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

6 positive · 2 caution
Best for

Residential, commercial, shaded-installations and hot-climate.

Strengths
23.30% module efficiency

Top 9% of the TOPCon 450-500 W segment, against a median of 22.52%. Ranked 1,017th in the whole database.

232.7 watts per square metre

Top 10% of the TOPCon 450-500 W segment, against a median of 225.2.

What owners get
Module Efficiency of 22.3–23.3%: Clearly Above Peer Comparables

Direct competitors in this power class reach 21.48% (Jinko Solar JS182MHC120) and 20.91% (Vikram Solar SOMERA). The advantage of up to +2.4 percentage points translates into measurable area savings — on a 10 kWp rooftop system, that means approximately 0.5–1 fewer modules to achieve the same installed capacity.

Low Temperature Coefficient Pmax: −0.29%/°C

N-type TOPCon technology delivers a significantly more favorable temperature coefficient than typical PERC modules (−0.34 to −0.36%/°C). At a summer module operating temperature of 65°C, power losses are reduced by approximately 1.3–1.75 percentage points, with a measurable positive impact on summer energy yield in the Polish climate.

30-Year Power Output Warranty, Retention ≥87.4%

The power warranty terms are on par with leading Tier-1 brands — Jinko Solar likewise guarantees 30 years at 87.4% retention for its bifacial module series. For investors, this enables a credible LCOE calculation over the full system lifetime.

Independent pvmagazine Rating: 5★ (91/100)

The HY SOLAR N-type TOPCon series received a "Very Good" rating in a pvmagazine test conducted by Gsola laboratory on 5 randomly sampled modules from mass production. Independent third-party validation is rare among manufacturers outside the BNEF Tier-1 list and represents a meaningful risk-mitigation argument for quality-conscious investors.

Trade-offs
No BNEF Tier-1 Status (Q1 2026)

HY SOLAR does not appear on the BNEF Tier-1 list as of Q1 2026 data. In practice, this creates a barrier to project finance for commercial installations and utility-scale PV plants above 50 kWp, where financial institutions routinely require modules from Tier-1-listed manufacturers as a condition for granting loans or leasing agreements.

Product Warranty of 15 Years vs. the 25-Year Industry Standard

Leading Tier-1 manufacturers — Jinko Solar, Trina Solar, and JA Solar — standardly offer a 25-year product warranty (materials and workmanship) on their new TOPCon series as of 2025–2026. HY SOLAR's coverage is limited to 15 years, which represents a real gap in risk protection for projects with long financing horizons of 20 years or more.

Notes from the database
  • 23.3% module efficiency - 0.8pp better than the TOPCon 450-500W median of 22.5%
  • 232.7 W/m² power density - 7.5 W/m² more than TOPCon 450-500W median (225.2 W/m²), more power per roof area
  • At -0.29%/°C, hot weather performance is typical for TOPCon 450-500W panels
  • Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof
  • Ranked #1017 out of 14005 panels for efficiency in the database

Specifications

Open datasheet PDF
Nominal power (Pmax) 465 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 23.30 % Strong Segment median 22.52%
Vmpp · Impp 33.43 V · 13.91 A Operating point at max power
Voc · Isc 39.95 V · 14.69 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 1762×1134×30 mm · 2.00 m² of roof
Weight 24.5 kg Typical Typical · median 24.0 kg
Cells 108 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.240 · 0.043 %/°C
NOCT 42 °C At 800 W/m², 20 °C ambient
Product warranty 15 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 406 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by HY SOLAR in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 465 Wp appear here. The rest cover the whole series.

IEC61215 requirements 5% IEC61215 requirements 5% Whole series

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Alternatives

All HY SOLAR panels
Filter these
Size
Panel Power Eff. Temp. Weight Difference
HY SOLAR HY-NT10/54GDF-465W 465 W 23.30% -0.290 24.5 kg You are here
LR7-54HJD-510M 510 W 25.00% -0.240 23.5 kg +45 W, cooler, +1.7 pp
AIKO-A495-MCE54Mw 495 W 24.80% -0.260 21.0 kg +30 W, lighter, +1.5 pp
LR7-54HJD-505M 505 W 24.70% -0.240 23.5 kg +40 W, cooler, +1.4 pp
AIKO-A490-MCE54Mw 490 W 24.50% -0.260 21.0 kg Cooler, lighter, +1.2 pp
LR7-54HJD-500M 500 W 24.50% -0.240 23.5 kg +35 W, cooler, +1.2 pp
CIPRO-TN9C54M-500W 500 W 24.50% -0.260 21.4 kg +35 W, lighter, +1.2 pp
HY-NT10/54GDF-445W 445 W 22.30% -0.290 24.5 kg -20 W, -1.0 pp
HY-NT10/54GDF-450 450 W 22.50% -0.290 24.5 kg -15 W, -0.8 pp

Found 1395 panels of the same or similar size to this one, within ±10 mm. See them here Found 1425 panels of the same or similar size to this one, within ±25 mm. See them here Found 3614 panels of the same or similar size to this one, within ±50 mm. See them here Found 3962 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What warranty does the HY SOLAR HY-NT10/54GDF series come with?
The HY-NT10/54GDF series carries a 15-year product warranty covering material and workmanship defects, and a 30-year power output warranty guaranteeing at least 87.4% of rated power after 30 years of operation. This is one of the longer power warranties available in this product class, providing reliable return-on-investment predictability over three full decades.
What does bifacial mean for the HY-NT10/54GDF and how much extra energy can it generate?
A bifacial panel harvests light from both the front side and reflected light from the ground or surroundings. The HY-NT10/54GDF has a bifaciality factor of 80–85%, which can deliver 5–15% additional energy depending on surface albedo — light gravel, white membranes, and concrete improve reflection. On pitched roofs the gain is lower than in ground-mounted systems.
Do HY-NT10/54GDF panels handle partial shading from a chimney or tree well?
Yes. SMBB and half-cut cell technology mean that shading one section of the module does not proportionally reduce output for the entire panel. Each half-cell string operates independently, significantly limiting losses from typical roof-level shading caused by chimneys, antennas, or tree branches — compared to conventional PERC modules.
How does TOPCon technology in the HY-NT10/54GDF series differ from older PERC technology?
TOPCon (Tunnel Oxide Passivated Contact) is a newer N-type cell architecture offering higher efficiency (up to 23.3% for this series), better performance under low irradiance, and a lower temperature coefficient of −0.29 %/°C versus a typical −0.35 %/°C for PERC. This means smaller power losses on hot days and higher energy yield under real-world conditions — overcast mornings and variable spring and autumn weather.
What are the dimensions and weight of the HY-NT10/54GDF panel — will it fit on a residential roof?
The module measures 1762 × 1134 × 30 mm and weighs 24.5 kg. A standard pitched residential roof typically accommodates 15 to 25 modules, yielding a system in the 7–12 kWp range — suitable for most single-family homes. Dimensions are close to common PERC panels, so no custom mounting hardware is required.
How does the HY-NT10/54GDF series perform during hot summer days?
With a low temperature coefficient of Pmax at −0.29 %/°C, the HY-NT10/54GDF loses less power on hot days than typical PERC modules rated at −0.35 %/°C. At a cell temperature of 65 °C, the module retains approximately 88.7% of rated power. This translates into higher yields in July and August, when rooftop surface temperatures in Poland can exceed 70 °C.
Add to compare