Strong in heat, no clear weak spot
The Heckert Solar ZEUS 1.1 (445-450Wp) with a black frame is a glass-glass module that combines high efficiency with a refined black frame aesthetic. The use of n-type TOPCon monocrystalline cells ensures stable performance in challenging conditions, as well as better utilization of radiation under variable sunlight. A key advantage of this series is its bifacial design, which allows the module to generate energy from both sides - a real benefit for roofs, ground-mounted installations, and areas with light reflection.
In practice, the ZEUS 1.1 helps to reduce energy losses in hot weather thanks to its favorable temperature coefficient, and the robust glass-glass construction increases resistance to microcracks and aging. For investors focused on long-term costs, the long warranty period is also important. This is a good choice for homes and businesses that want to maximize production from a limited area, without compromising on the appearance of the installation.
Ranking
Signals from the data
Residential, commercial and hot-climate.
Top 4% of the TOPCon 400-450 W segment, against a median of -0.290. Ranked 1,309th in the whole database.
Top 10% of the TOPCon 400-450 W segment, against a median of 51.4. Ranked 1,433rd in the whole database.
Top 17% of the TOPCon 400-450 W segment, against a median of 22.00%.
A temperature coefficient of -0.28%/°C places the ZEUS 1.1 among the top performers in its segment — for reference, standard PERC modules typically achieve -0.34 to -0.36%/°C. At a typical summer cell temperature of 65°C, the module loses approximately 11.2% of its rated power, compared to approximately 14.4% for PERC, which translates to measurably higher annual energy yield under Polish climatic conditions.
The Glass-Glass construction with n-type TOPCon cells enables energy harvesting from the rear side (the manufacturer claims up to 25% additional yield with suitable ground albedo). Dual 2.0 mm tempered glass panes on both sides eliminate the risk of microcracks and moisture ingress, extending the practical service life beyond the standard 25 years.
The series carries a Class A fire resistance rating per IEC 61730 — the highest classification available — which is required for pitched-roof installations near other buildings in many EU municipalities. The peer-comparable Suntech Ultra V Pro Mini (monofacial, glass-glass) in this power class does not always explicitly declare a Class A rating.
Heckert Solar guarantees performance above 87.4% of nominal power after 30 years — the same time horizon covers both the product warranty and the linear power output warranty. Most Chinese Tier-1 manufacturers (JA Solar, LONGi) offer 25-year power warranties with degradation to approximately 84.8%.
Heckert Solar (est. 1992, Chemnitz) is the last PV module manufacturer maintaining continuous production in Germany — Solarwatt ceased production in Dresden in August 2024, and Meyer Burger in Freiberg in April 2024. The company has held the Top Brand PV certification uninterrupted since 2015, a relevant factor when assessing supplier risk in commercial installations.
The maximum module efficiency of the series is 22.5%, while the peer-comparable SunKean/Sunket SKT430–450M10-108D5 achieves 23.04% at the same 450 Wp power rating. The 0.54 percentage-point gap means that over the same roof area, the ZEUS 1.1 will generate approximately 2.3% less energy — a meaningful consideration where installation space is constrained.
At 23.7 kg, the module is approximately 2–3 kg heavier than typical glass-foil modules of equivalent power output. In large rooftop installations, this may require structural load verification or additional mounting hardware, adding cost and engineering time to the project.
- At 22.3% efficiency, this panel is on par with typical TOPCon 400-450W modules
- Power density of 222.7 W/m² matches the TOPCon 400-450W median
- At -0.28%/°C, hot weather performance is typical for TOPCon 400-450W panels
- At 20.9 kg, this panel is 1.1 kg lighter than TOPCon 400-450W median (22.0 kg) - easier handling during installation
- 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Found 1395 panels of the same or similar size to this one, within ±10 mm. See them here Found 1425 panels of the same or similar size to this one, within ±25 mm. See them here Found 3614 panels of the same or similar size to this one, within ±50 mm. See them here Found 3962 panels of the same or similar size to this one, within ±100 mm. See them here