--- title: "ZNShine ZXM8-TPLDD110-560W 560W Solar Panel - Specs & Review | ComparePV" description: "ZNShine ZXM8-TPLDD110-560W 560W solar panel. Specs: 21.43% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/znshine-zxm8-tpldd110-560w" updated: 2026-09-11 --- # ZNShine ZXM8-TPLDD110-560W Warranty pick, no clear weak spot 589 panels in the segment PERC 550-600 W ## Identity - **Manufacturer:** ZNShine - **Model:** ZXM8-TPLDD110-560W - **Series:** ZXM8-TPLDD110 - **Rated power:** 560 W - **Cell technology:** PERC - **Bifacial:** yes ## How it compares Compared against segment PERC 550-600 W (589 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 560 W | 560 W | Typical | | | Module efficiency | 21.43% | 21.29% | Typical | 8,274 | | Power density | 214.3 | 212.9 | Typical | 8,235 | | Temperature coefficient | -0.340 | -0.350 | Typical | 8,778 | | Weight (kg) | 32.5 kg | 30.8 kg | Typical | | | Performance warranty | 30 yrs | 27 yrs | Strong - top 25% | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 21.43% | 21.29% | Typical | 8,274 | | Power density | 214.3 | 212.9 | Typical | 8,235 | | Temperature coefficient | -0.340 | -0.350 | Typical | 8,778 | | Weight per kWp | 58.0 | 52.7 | Typical | 11,535 | | Performance warranty | 30 yrs | 27 yrs | Strong - top 25% | 21 | ### Strengths - **30 year performance warranty** - Top 25% of the PERC 550-600 W segment, against a median of 27 yrs. - **Best for:** Commercial, utility-scale, shaded-installations and hot-climate. ## Specification ### Electrical - **Rated power (Pmax):** 560 W - **Efficiency:** 21.43 % - **Voltage at Pmax (Vmp):** 32.00 V - **Current at Pmax (Imp):** 17.50 A - **Open-circuit voltage (Voc):** 38.40 V - **Short-circuit current (Isc):** 18.44 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.340 %/degC - **Temperature coefficient of Voc:** -0.290 %/degC - **Temperature coefficient of Isc:** 0.050 %/degC - **NOCT:** 43 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** PERC - **Cell count:** 110 - **Bifacial:** yes - **Bifacial gain:** 25.00 ### Physical - **Length:** 2384 mm - **Width:** 1096 mm - **Thickness:** 35 mm - **Weight:** 32.5 kg - **Area:** 2.61 m2 - **Power density:** 214.3 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 85.0 % - **First-year degradation:** 2.00 % - **Annual degradation:** 0.45 % - **Output after 30 years:** 476 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 8274 of 14005 | | Power density | 8235 of 14005 | | Temperature coefficient | 8778 of 14005 | | Weight | 11535 of 14005 | | Warranty | 21 of 14005 | ## About this series The ZXM8-TPLDD110 series represents a breakthrough in the bifacial module range, combining advanced N-type TOPCon cell technology with the exceptional durability of glass-glass construction. This solution effectively eliminates the problem of light-induced and potential-induced degradation, ensuring stable system operation for over three decades. A key technological differentiator is the **application of an innovative graphene coating**, which, thanks to its hydrophobic properties, facilitates self-cleaning and significantly increases light transmittance to the cells. Thanks to the **high bifaciality of the modules**, these panels generate additional energy from reflected radiation, which is particularly effective in ground-mounted installations and on roofs with light-colored surfaces. This series resolves the dilemma between extreme efficiency and resistance to micro-cracks, offering a **reinforced Double Glass structure** resistant to aggressive environmental conditions such as salt mist or ammonia. It is a product dedicated to investors seeking maximum return on investment in large commercial projects and PV farms. It stands out from the competition with its **minimal annual degradation rate** and excellent performance at high temperatures, guaranteeing the highest yields on hot days. The design based on 110 half-cut cells further reduces resistive losses, making this series one of the most sound choices for professional photovoltaics. ## Notable figures - At 21.4% efficiency, this panel is on par with typical \*\*PERC 550-600W\*\* modules - At 214.3 W/m² power density, roof space requirements are typical for \*\*PERC 550-600W\*\* panels - Temperature coefficient of -0.34%/°C matches the \*\*PERC 550-600W\*\* median - At 32.5 kg (1.7 kg above \*\*PERC 550-600W\*\* median of 30.8 kg), requires checking roof load capacity - 70% bifaciality enables rear-side power generation, boosting yield by 4-10% on reflective surfaces ## Questions ### What is the graphene coating on ZNShine ZXM8-TPLDD110 panels and what benefits does it offer? The graphene coating is applied to the front glass of the module and, thanks to its hydrophobic properties, repels water and dirt, enabling self-cleaning during rainfall. It also increases light transmittance to the cells, boosting energy yield, especially in dusty regions or areas with infrequent rainfall where conventional panels lose efficiency faster due to soiling. ### How much extra energy do ZXM8-TPLDD110 panels produce thanks to bifacial technology? The exact gain depends on ground albedo, but bifacial panels installed on ground-mount systems or light-colored roofs (white membrane, gravel, PVC) can generate an extra few to over ten percent of energy compared to a monofacial equivalent. The module delivers up to 560 Wp on the front side, while the rear side adds output from reflected light, making it especially cost-effective for PV farms and trackers. ### What warranty comes with ZNShine ZXM8-TPLDD110 panels? The manufacturer provides a 12-year product warranty covering material and workmanship defects, plus a 30-year power output warranty, above the industry average. This results from using low-degradation N-type TOPCon cells in a glass-glass structure, which effectively limits light- and potential-induced degradation, ensuring more stable energy production throughout the system's long service life. ### Are ZXM8-TPLDD110 panels suitable for coastal installations or near livestock farms? Yes, this series' double-glass construction is resistant to harsh environments, including salt mist and ammonia exposure, confirmed by corrosion resistance certifications. As a result, ZXM8-TPLDD110 panels perform well both in coastal installations and on agricultural building roofs, where standard framed modules typically corrode and degrade the laminate faster. ### How many ZXM8-TPLDD110 panels are needed for a 10 kWp installation? With a unit power of up to 560 Wp, a 10 kWp system requires roughly 18 modules from this series, though the exact number depends on available roof space, orientation, and inverter sizing. Note that due to bifaciality, the actual energy yield from such a set can exceed that of monofacial panels with the same nominal DC power. ### How does the ZXM8-TPLDD110 series differ from standard monofacial PERC panels? The key difference is the use of N-type TOPCon cells instead of PERC, resulting in a lower annual degradation rate and better performance in high temperatures, meaning higher yields on hot days. Additionally, the 110 half-cut cell layout reduces resistive losses, and the bifacial design captures extra energy from the rear side, something single-sided framed panels cannot offer. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/ZXM8-TPLDD110-210-2384-1096-35-30NH-535-560W-350mm-20220829-091bedf21c4e.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | Cooler, lighter, +3.6 pp | | [Longi Solar LR7-60HVH-560M](https://comparepv.com/panel/longi-lr7-60hvh-560m) | 560 W | Cooler, lighter, +3.4 pp | | [Longi Solar LR7-60HVH-555M](https://comparepv.com/panel/longi-lr7-60hvh-555m) | 555 W | Cooler, lighter, +3.2 pp | | [Longi Solar LR7-60HVHL-550M](https://comparepv.com/panel/longi-lr7-60hvhl-550m) | 550 W | Cooler, 16 kg lighter, +3.0 pp | | [JA Solar JAT60S40-540/LR](https://comparepv.com/panel/ja-solar-jat60s40-540-lr) | 540 W | Cooler, lighter, +3.0 pp | | [Gokin GK-5-60HG-540M](https://comparepv.com/panel/gokin-gk-5-60hg-540m) | 540 W | Cooler, lighter, +3.0 pp | | [Jinko Solar JKM545-54QL6-DV-F1-EU](https://comparepv.com/panel/jinko-solar-jkm545-54ql6-dv-f1-eu) | 545 W | Cooler, lighter, +2.8 pp | | [ZNShine ZXM8-TPLD110-535](https://comparepv.com/panel/znshine-zxm8-tpld110-535) | 535 W | -25 W, -0.9 pp | | [ZNShine ZXM8-TPLD110-540](https://comparepv.com/panel/znshine-zxm8-tpld110-540) | 540 W | -20 W, -0.8 pp | | [ZNShine ZXM8-TPLD110-545](https://comparepv.com/panel/znshine-zxm8-tpld110-545) | 545 W | -15 W, -0.6 pp | | [ZNShine ZXM8-TPLD110-550](https://comparepv.com/panel/znshine-zxm8-tpld110-550) | 550 W | -10 W, -0.4 pp | | [AIKO AIKO-A680-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a680-mde72mw) | 680 W | +120 W, cooler, +3.8 pp | | [AIKO AIKO-A675-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a675-mde72mw) | 675 W | +115 W, cooler, +3.6 pp | | [AIKO AIKO-A700-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a700-mae78dw) | 700 W | +140 W, cooler, +3.6 pp | | [AIKO AIKO-A695-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a695-mae78dw) | 695 W | +135 W, cooler, +3.5 pp | | [AIKO AIKO-G670-MCH72Mw](https://comparepv.com/panel/aiko-aiko-g670-mch72mw) | 670 W | +110 W, cooler, +3.4 pp | --- Source: https://comparepv.com/panel/znshine-zxm8-tpldd110-560w Not in this file, on the page: a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.