--- title: "Yingli LF535M10-72H Solar Panel: Specs & Datasheet | ComparePV" description: "Yingli LF535M10-72H solar panel. Specs: 20.70% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/yingli-lf535m10-72h" image: "https://comparepv.com/og/panel/yingli-lf535m10-72h.png" updated: 2026-09-11 --- # Yingli LF535M10-72H Middle of its segment, weak in heat 142 panels in the segment N-type 500-550 W ## Identity - **Manufacturer:** Yingli - **Model:** LF535M10-72H - **Series:** LFxxxM10-72H - **Rated power:** 535 W - **Cell technology:** N-type ## How it compares Compared against segment N-type 500-550 W (142 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 535 W | 520 W | Strong - top 18% | | | Module efficiency | 20.70% | 22.55% | Weak - bottom 5% | 10,842 | | Power density | 207.0 | 225.3 | Weak - bottom 5% | 10,927 | | Temperature coefficient | -0.354 | -0.290 | Weak - bottom 1% | 12,365 | | Weight (kg) | 28.5 kg | 26.2 kg | Typical | | | Performance warranty | 25 yrs | 30 yrs | Weak - bottom 8% | 9,912 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 20.70% | 22.55% | Weak - bottom 5% | 10,842 | | Power density | 207.0 | 225.3 | Weak - bottom 5% | 10,927 | | Temperature coefficient | -0.354 | -0.290 | Weak - bottom 1% | 12,365 | | Weight per kWp | 53.3 | 50.0 | Typical | 7,191 | | Performance warranty | 25 yrs | 30 yrs | Weak - bottom 8% | 9,912 | ### Watch out for - **-0.354 %/°C temperature coefficient** - Bottom 1% of the N-type 500-550 W segment, against a median of -0.290. Ranked 12,365th in the whole database. - **20.70% module efficiency** - Bottom 5% of the N-type 500-550 W segment, against a median of 22.55%. Ranked 10,842nd in the whole database. - **207.0 watts per square metre** - Bottom 5% of the N-type 500-550 W segment, against a median of 225.3. Ranked 10,927th in the whole database. - **Best for:** Commercial, utility-scale and shaded-installations. - **Not ideal for:** Hot climates, tight roof space and roofs where every square metre has to count. ## Specification ### Electrical - **Rated power (Pmax):** 535 W - **Efficiency:** 20.70 % - **Voltage at Pmax (Vmp):** 41.51 V - **Current at Pmax (Imp):** 12.89 A - **Open-circuit voltage (Voc):** 49.87 V - **Short-circuit current (Isc):** 13.68 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.354 %/degC - **Temperature coefficient of Voc:** -0.266 %/degC - **Temperature coefficient of Isc:** 0.046 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** N-type ### Physical - **Length:** 2279 mm - **Width:** 1134 mm - **Thickness:** 35 mm - **Weight:** 28.5 kg - **Area:** 2.58 m2 - **Power density:** 207.0 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 25 years - **Output guaranteed at end of warranty:** 80.0 % - **Output after 30 years:** 407 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 10842 of 14129 | | Power density | 10927 of 14129 | | Temperature coefficient | 12365 of 14129 | | Weight | 7191 of 14129 | | Warranty | 9912 of 14129 | ## About this series The Yingli LFxxxM10-72H series has been designed for installations where stable energy production is crucial, even under challenging conditions on rooftops or the ground. The use of **monocrystalline PERC cells** and a **half-cut** architecture allows for reduced internal losses and better performance under partial shading - when shadows from chimneys, eaves, or trees can reduce output in standard modules. The **M10 technology** also plays a significant role in this series, supporting high power density while maintaining good performance on warmer days - which is important in Polish rooftop installations where modules heat up in the summer. The manufacturer emphasizes **enhanced resistance to demanding environments** thanks to high-quality lamination materials and a well-designed module structure, which reduces the risk of micro-cracks and performance degradation over time. Yingli LFxxxM10-72H is a good choice for installers and investors looking for modules for larger commercial installations, solar farms, and extensive prosumer systems, where repeatability of parameters and predictable yields are key. ## Notable figures - At 20.7% efficiency, this panel is 1.9pp below the \*\*N-type 500-550W\*\* median of 22.6% - At 207.0 W/m², this panel generates 18.3 W/m² less per unit area than \*\*N-type 500-550W\*\* median (225.3 W/m²) - Temperature coefficient of -0.35%/°C is 0.06pp worse than \*\*N-type 500-550W\*\* median (-0.29%/°C) - higher losses in summer heat - At 28.5 kg (2.3 kg above \*\*N-type 500-550W\*\* median of 26.2 kg), requires checking roof load capacity - In the top 77% for efficiency among all N-type panels ## Questions ### What is the maximum power output of the Yingli LFxxxM10-72H panel? Panels from the LFxxxM10-72H series reach a maximum power output of up to 555 Wp. This high output results from M10 cell technology with larger cells and half-cut architecture, allowing more energy to be generated per unit of roof or ground area compared to smaller, older modules of similar dimensions. ### What warranty comes with the Yingli LFxxxM10-72H series? The manufacturer provides a 12-year product warranty and a 25-year linear power output warranty. This means Yingli guarantees a defined minimum power production level for a quarter of a century, giving investors confidence in the long-term profitability of commercial installations and solar farms. ### How do N-type cells in the LFxxxM10-72H differ from standard PERC panels? N-type cells have a lower degradation rate over time and reduced susceptibility to light-induced degradation (LID) compared to standard P-type cells. This translates into more stable energy yields throughout the system's lifetime, particularly noticeable after a decade or more of operation. ### Are the Yingli LFxxxM10-72H panels bifacial? No, this series uses monofacial modules rather than bifacial ones. Energy is generated only from the front side of the panel, which is a standard, proven solution for typical rooftop and ground-mounted installations without requiring specially reflective ground surfaces. ### What types of installations are the Yingli LFxxxM10-72H panels suited for? The LFxxxM10-72H series is designed for larger commercial installations, solar farms, and extensive prosumer systems. The high power rating per module and consistent parameters make it easier to design large-scale installations where predictable yields and optimized string sizing are critical. ### Is Yingli a Tier 1 manufacturer, and is it a safe choice for a large investment? Yes, Yingli holds Tier 1 manufacturer status, reflecting strong financial stability and decades of experience in global photovoltaic module production. For installers and investors, this is a key indicator that manufacturer warranties will be honored and that material quality and production processes undergo rigorous control. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/LF535-555M10-72H-EN-53b25d4c6482.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | Cooler, lighter, +4.3 pp | | [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | Cooler, lighter, +4.1 pp | | [Longi Solar LR7-60HVH-560M](https://comparepv.com/panel/longi-lr7-60hvh-560m) | 560 W | Cooler, +4.1 pp, +5 yr warranty | | [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | Cooler, lighter, +4.0 pp | | [WINAICO WST-505BKX54-A2](https://comparepv.com/panel/winaico-wst-505bkx54-a2) | 505 W | Cooler, +4.0 pp, +5 yr warranty | | [Longi Solar LR7-60HVH-555M](https://comparepv.com/panel/longi-lr7-60hvh-555m) | 555 W | Cooler, +3.9 pp, +5 yr warranty | | [AIKO AIKO-A490-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a490-mce54mw) | 490 W | Cooler, lighter, +3.8 pp | | [Yingli YL530DF72 e/2](https://comparepv.com/panel/yingli-yl530df72-e-2) | 530 W | Heavier, +5 yr warranty | | [Yingli YL535DF72 e/2](https://comparepv.com/panel/yingli-yl535df72-e-2) | 535 W | Heavier, +5 yr warranty | | [Yingli YL540DF72 e/2](https://comparepv.com/panel/yingli-yl540df72-e-2) | 540 W | Heavier, +5 yr warranty | | [Yingli LF540M10-72H](https://comparepv.com/panel/yingli-lf540m10-72h) | 540 W | Very close match | | [AIKO AIKO-A650-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a650-mae72mw) | 650 W | +115 W, cooler, +4.5 pp | | [AIKO AIKO-A645-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a645-mae72mw) | 645 W | +110 W, cooler, +4.3 pp | | [AIKO AIKO-A640-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a640-mae72mw) | 640 W | +105 W, cooler, +4.1 pp | | [AIKO AIKO-A635-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a635-mae72mw) | 635 W | +100 W, cooler, +3.9 pp | | [AIKO AIKO-A630-MAH72Dw](https://comparepv.com/panel/aiko-aiko-a630-mah72dw) | 630 W | +95 W, cooler, +3.7 pp | --- Source: https://comparepv.com/panel/yingli-lf535m10-72h Not in this file, on the page: a thirty-year output simulator and alternatives filtered by how closely they match these dimensions.