--- title: "Suntech STP670S-D66/Pmh+ 670W Solar Panel - Specs & Review | ComparePV" description: "Suntech STP670S-D66/Pmh+ 670W solar panel. Specs: 21.60% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/wuxi-suntech-power-co-ltd-stp670s-d66-pmh" updated: 2026-09-11 --- # Suntech STP670S-D66/Pmh+ Middle of its segment, weak in heat 249 panels in the segment TOPCon 650-700 W ## Identity - **Manufacturer:** Suntech - **Model:** STP670S-D66/Pmh+ - **Series:** Ultra X Plus - **Rated power:** 670 W - **Cell technology:** TOPCon - **Bifacial:** yes ## How it compares Compared against segment TOPCon 650-700 W (249 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 670 W | 665 W | Typical | | | Module efficiency | 21.60% | 22.40% | Weak - bottom 15% | 7,652 | | Power density | 215.7 | 223.7 | Weak - bottom 13% | 7,644 | | Temperature coefficient | -0.340 | -0.290 | Weak - bottom 6% | 8,778 | | Weight (kg) | 37.5 kg | 34.6 kg | Weak - bottom 21% | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 21.60% | 22.40% | Weak - bottom 15% | 7,652 | | Power density | 215.7 | 223.7 | Weak - bottom 13% | 7,644 | | Temperature coefficient | -0.340 | -0.290 | Weak - bottom 6% | 8,778 | | Weight per kWp | 56.0 | 53.2 | Weak - bottom 21% | 10,312 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **-0.340 %/°C temperature coefficient** - Bottom 6% of the TOPCon 650-700 W segment, against a median of -0.290. Ranked 8,778th in the whole database. - **215.7 watts per square metre** - Bottom 13% of the TOPCon 650-700 W segment, against a median of 223.7. - **21.60% module efficiency** - Bottom 15% of the TOPCon 650-700 W segment, against a median of 22.40%. - **Best for:** Utility-scale and shaded-installations. - **Not ideal for:** Hot climates, roofs where every square metre has to count and tight roof space. ## Specification ### Electrical - **Rated power (Pmax):** 670 W - **Efficiency:** 21.60 % - **Voltage at Pmax (Vmp):** 38.45 V - **Current at Pmax (Imp):** 17.43 A - **Open-circuit voltage (Voc):** 46.45 V - **Short-circuit current (Isc):** 18.43 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.340 %/degC - **Temperature coefficient of Voc:** -0.260 %/degC - **Temperature coefficient of Isc:** 0.050 %/degC - **NOCT:** 42 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** TOPCon - **Cell count:** 132 - **Bifacial:** yes - **Bifacial gain:** 25.00 ### Physical - **Length:** 2384 mm - **Width:** 1303 mm - **Thickness:** 35 mm - **Weight:** 37.5 kg - **Area:** 3.11 m2 - **Power density:** 215.7 Wp/m2 ### Warranty and degradation - **Product warranty:** 15 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 85.0 % - **First-year degradation:** 2.00 % - **Annual degradation:** 0.45 % - **Output after 30 years:** 569 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 7652 of 14005 | | Power density | 7644 of 14005 | | Temperature coefficient | 8778 of 14005 | | Weight | 10312 of 14005 | | Warranty | 21 of 14005 | ## About this series Ultra X Plus is a solar panel series built around **210mm monocrystalline silicon cells**, designed for large-scale commercial and industrial installations where every square meter of roof or ground space counts. The use of **PERC technology combined with half-cut and SMBB** cell design helps reduce current losses and improve heat dissipation, allowing the modules to perform reliably even under high temperatures and partial shading. The series is available in both monofacial and **bifacial** configurations, giving investors the flexibility to choose the solution best suited to a specific site and their goal of maximizing energy yield from the rear side of the panel. The large cell format translates into high power density per module, which meaningfully lowers the per-watt cost of the installation (BoS) and shortens installation time for the same panel count. This makes it a solution aimed primarily at installers of solar farms and utility-scale projects seeking high efficiency and lower LCOE without compromising on mechanical durability, confirmed by resistance to heavy snow and wind loads. Ultra X Plus thus combines production scale, proven cell technology, and configuration flexibility in one market-mature series. ## Notable figures - Efficiency of 21.6% is 0.8pp below the \*\*TOPCon 650-700W\*\* median (22.4%) - Power density of 215.7 W/m² is 8.0 W/m² below \*\*TOPCon 650-700W\*\* median (223.7 W/m²) - needs more roof space - -0.34%/°C temperature coefficient - 0.05pp worse than \*\*TOPCon 650-700W\*\* median (-0.29%/°C), expect higher hot weather losses - At 37.5 kg (2.9 kg above \*\*TOPCon 650-700W\*\* median of 34.6 kg), requires checking roof load capacity - Bifaciality factor of 70% can add 4-10% extra yield with reflective mounting surface ## Questions ### What is the maximum power output of the Suntech Ultra X Plus panel? Panels in the Ultra X Plus series reach a maximum power output of up to 675 Wp. This is achieved through large 210 mm silicon cells combined with half-cut and SMBB technology, which increase power density within the module. As a result, fewer panels are needed to reach the same installed capacity, shortening installation time and reducing mounting structure costs. ### What is TOPCon technology used in the Ultra X Plus, and how does it differ from PERC? TOPCon (Tunnel Oxide Passivated Contact) is a newer-generation cell technology than PERC, used in the Ultra X Plus series. An additional passivation layer on the rear side of the cell reduces carrier recombination, resulting in higher module efficiency and a smaller power loss at high temperatures compared to standard PERC panels. In practice, this means higher energy yield, especially during summer and under high irradiance. ### What warranty comes with Suntech Ultra X Plus panels? The manufacturer provides a 15-year product warranty covering material and workmanship defects, along with a 30-year linear power output warranty. This means the panel must maintain a guaranteed percentage of its initial power throughout its service life, and as a Tier 1 manufacturer, Suntech offers reliable after-sales support for the entire warranty period. ### Is the Suntech Ultra X Plus a bifacial panel? No, this specific variant of the Ultra X Plus series is a monofacial module, generating energy only from the front side. The manufacturer also offers this series in a bifacial version, but choosing between the two depends on the mounting type and site conditions - the monofacial version is best suited for rooftops and installations without reflective ground surfaces. ### Is Suntech a reliable manufacturer, and what does Tier 1 status mean? Suntech is a Chinese manufacturer with Tier 1 status according to BloombergNEF's classification, indicating financial stability, in-house production lines, and a proven track record of supplying modules to large-scale energy projects worldwide. For investors, Tier 1 status matters for bank financing, as lenders and insurers often require Tier 1 panels as a condition for approving project loans. ### Are Ultra X Plus panels suitable for large-scale solar farms? Yes, the Ultra X Plus series was designed for commercial, industrial, and utility-scale installations. The large cell format and power output of up to 675 Wp reduce the number of panels, support structures, and cabling needed for a given installed capacity, directly lowering Balance of System (BoS) costs and the levelized cost of electricity (LCOE). ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/STP650-670S-D66-Pmh_EN-b2f13847103e.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [AIKO AIKO-A650-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a650-mae72mw) | 650 W | Cooler, lighter, +3.6 pp | | [AIKO AIKO-A680-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a680-mde72mw) | 680 W | Cooler, lighter, +3.6 pp | | [AIKO AIKO-A675-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a675-mde72mw) | 675 W | Cooler, lighter, +3.4 pp | | [AIKO AIKO-A645-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a645-mae72mw) | 645 W | Cooler, lighter, +3.4 pp | | [AIKO AIKO-A700-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a700-mae78dw) | 700 W | +30 W, cooler, +3.4 pp | | [AIKO AIKO-A695-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a695-mae78dw) | 695 W | Cooler, lighter, +3.3 pp | | [AIKO AIKO-G670-MCH72Mw](https://comparepv.com/panel/aiko-aiko-g670-mch72mw) | 670 W | Cooler, lighter, +3.2 pp | | [Suntech STP650S-D66/Pmh+](https://comparepv.com/panel/wuxi-suntech-power-co-ltd-stp650s-d66-pmh) | 650 W | -20 W, -0.7 pp | | [Suntech STP655S-D66/Wmh](https://comparepv.com/panel/suntech-stp655s-d66-wmh) | 655 W | Lighter, -0.5 pp, -5 yr warranty | | [Suntech STP660S-D66/Wmh](https://comparepv.com/panel/suntech-stp660s-d66-wmh) | 660 W | Lighter, -0.4 pp, -5 yr warranty | | [Suntech STP665S-D66/Wmh](https://comparepv.com/panel/suntech-stp665s-d66-wmh) | 665 W | Lighter, -0.2 pp, -5 yr warranty | | [Suntech STP675S-D66/Wmh](https://comparepv.com/panel/suntech-stp675s-d66-wmh) | 675 W | Lighter, -5 yr warranty | | [AIKO AIKO-A805-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a805-grh78dw) | 805 W | +135 W, cooler, +3.5 pp | | [AIKO AIKO-A800-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a800-grh78dw) | 800 W | +130 W, cooler, +3.3 pp | | [AIKO AIKO-A795-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a795-grh78dw) | 795 W | +125 W, cooler, +3.2 pp | | [AIKO AIKO-A790-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a790-grh78dw) | 790 W | +120 W, cooler, +3.0 pp | --- Source: https://comparepv.com/panel/wuxi-suntech-power-co-ltd-stp670s-d66-pmh Not in this file, on the page: a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.