---
title: "WINAICO WST-505BKX54-B2 Solar Panel: Specs & Datasheet | ComparePV"
description: "WINAICO WST-505BKX54-B2 solar panel. Specs: 24.70% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient."
source: "https://comparepv.com/panel/winaico-wst-505bkx54-b2"
image: "https://comparepv.com/og/panel/winaico-wst-505bkx54-b2.png"
updated: 2026-11-15
---

# WINAICO WST-505BKX54-B2

Efficiency leader, no clear weak spot

38 panels in the segment Back Contact 500-550 W


## Identity

- **Manufacturer:** WINAICO
- **Model:** WST-505BKX54-B2
- **Series:** WBC Back Contact Series Ultra Black
- **Rated power:** 505 W
- **Cell technology:** Back Contact
- **Bifacial:** yes


## How it compares

Compared against segment Back Contact 500-550 W (38 panels).


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Power (Wp) | 505 W | 505 W | Typical |  |
| Module efficiency | 24.70% | 24.50% | Strong - top 13% | 52 |
| Power density | 247.4 | 245.0 | Strong - top 13% | 52 |
| Temperature coefficient | -0.260 | -0.260 | Typical | 521 |
| Weight (kg) | 25.0 kg | 23.5 kg | Typical |  |
| Performance warranty | 30 yrs | 30 yrs | Typical | 31 |


### Full peer table


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Module efficiency | 24.70% | 24.50% | Strong - top 13% | 52 |
| Power density | 247.4 | 245.0 | Strong - top 13% | 52 |
| Temperature coefficient | -0.260 | -0.260 | Typical | 521 |
| Weight per kWp | 49.5 | 46.6 | Typical | 3,076 |
| Performance warranty | 30 yrs | 30 yrs | Typical | 31 |


### Strengths

- **24.70% module efficiency** - Top 13% of the Back Contact 500-550 W segment, against a median of 24.50%.
- **247.4 watts per square metre** - Top 13% of the Back Contact 500-550 W segment, against a median of 245.0.

- **Best for:** Residential and BIPV.


## Specification


### Electrical

- **Rated power (Pmax):** 505 W
- **Efficiency:** 24.70 %
- **Voltage at Pmax (Vmp):** 35.64 V
- **Current at Pmax (Imp):** 14.18 A
- **Open-circuit voltage (Voc):** 40.94 V
- **Short-circuit current (Isc):** 15.28 A
- **Max system voltage:** 1500 V


### Temperature

- **Temperature coefficient of Pmax:** -0.260 %/degC
- **Temperature coefficient of Voc:** -0.220 %/degC
- **Temperature coefficient of Isc:** 0.050 %/degC
- **NOCT:** 45 degC


### Cell and construction

- **Cell type:** Monocrystalline
- **Cell technology:** Back Contact
- **Cell count:** 108
- **Bifacial:** yes
- **Bifacial gain:** 20.00


### Physical

- **Length:** 1800 mm
- **Width:** 1134 mm
- **Thickness:** 35 mm
- **Weight:** 25.0 kg
- **Area:** 2.04 m2
- **Power density:** 247.4 Wp/m2


### Warranty and degradation

- **Product warranty:** 30 years
- **Performance warranty:** 30 years
- **Output guaranteed at end of warranty:** 88.8 %
- **First-year degradation:** 1.00 %
- **Annual degradation:** 0.35 %
- **Output after 30 years:** 449 W


## Rank in the whole catalogue


| Measure | Position |
| --- | --- |
| Efficiency | 52 of 14354 |
| Power density | 52 of 14354 |
| Temperature coefficient | 521 of 14354 |
| Weight | 3076 of 14354 |
| Warranty | 31 of 14354 |


## Pros

- **Highest efficiency in its class** - The WBC Ultra Black module reaches 24.7% efficiency at 505 Wp, clearly ahead of comparable same-power modules - AE Solar AURORA MD-132 (21.29%), Sunova Tangra M Pro HD (22.7%), and Hiwatt HW-M12/100H (21%). A 2-3.7 pp advantage translates into a smaller installation footprint for the same generated power.
- **Back Contact cell technology** - The absence of visible busbars and front-side metallization grid eliminates shading losses from ribbons and delivers a uniform, aesthetic all-black appearance (Ultra Black), a key factor for residential installations.
- **30-year product and power warranty** - The manufacturer provides a 30-year product warranty and a 30-year linear power warranty, exceeding the market standard for PERC/TOPCon modules (typically 25 years) and guaranteeing over 87-89% of rated power after 30 years of operation.
- **Bifacial design with extra yield** - The bifacial glass-glass construction captures additional energy from reflected light off the ground, with the manufacturer stating this BC line can achieve up to roughly a 20% yield gain under optimal mounting conditions.
- **Tier-1 manufacturer with two decades of track record** - WINAICO (Taiwan, founded 2003) is a recognized Tier-1/bankable manufacturer, which simplifies project financing through banks and leasing institutions and increases confidence in long-term warranty fulfillment.


## Cons

- **Limited field track record** - The WBC Back Contact Ultra Black series launched in 2025, meaning there is no multi-year field performance data yet compared to the more established PERC/TOPCon technologies that have been on the market for several years.
- **Single power variant in the series** - The series is offered in only one power rating (505 Wp), limiting flexibility when matching module selection to different roof configurations or system sizes compared to competing series offering multiple power variants.


## About this series

The WINAICO WBC Back Contact Ultra Black series answers the growing demand for a visually seamless rooftop installation, free of the silver grid lines that typically run across conventional panels. The modules use N-type monocrystalline cells built on **back contact** technology, where all electrical contacts are moved to the rear of the cell - this keeps the front surface completely free of visible **busbars** and gives the module a deep, uniform black appearance. A dual-coated front and rear glass further supports this consistent coloring by eliminating the discoloration and glare common in standard panels. The series relies on **bifacial** cells, allowing additional energy capture from light reflected off the mounting surface and increasing real-world yield per square meter of roof. This makes it a strong fit for the residential and premium segment, where rooftop appearance matters as much as energy output. WINAICO backs the technology with a **30-year product warranty** and a linear performance warranty, while IEC certification confirms compliance with international safety and quality standards. It's a series built for those seeking a balance between modern design and high energy efficiency.


## Notable figures

- At 24.7% efficiency, this panel is on par with typical \*\*Back Contact 500-550W\*\* modules
- At 247.4 W/m² power density, roof space requirements are typical for \*\*Back Contact 500-550W\*\* panels
- At -0.26%/°C, hot weather performance is typical for \*\*Back Contact 500-550W\*\* panels
- At 25.0 kg (1.5 kg above \*\*Back Contact 500-550W\*\* median of 23.5 kg), requires checking roof load capacity
- Bifaciality factor of 40% can add 2-6% extra yield with reflective mounting surface


## Questions


### What is Back Contact technology in the WINAICO WBC Ultra Black panels and how does it differ from standard half-cut modules?

In Back Contact technology, all electrodes and busbars are located on the rear side of the cell, leaving the front surface free of visible metallization grids. This results in higher conversion efficiency, a cleaner uniform black appearance, and reduced shading losses from front-side busbars. Unlike conventional half-cut modules, WBC panels make better use of the cell surface area for light absorption.


### Are the WINAICO WBC Ultra Black 505 Wp panels bifacial, and is ground-mounting worthwhile?

Yes, the WBC Ultra Black series uses bifacial cells that generate additional energy from light reflected off the surface beneath the panel. On ground-mount systems or flat roofs with a light-colored surface, such as white gravel or PVC membrane, energy yield can increase by several to over ten percent compared to a monofacial module. The mounting structure should allow unobstructed light access to the rear side of the panel.


### What warranty does WINAICO offer on the WBC Back Contact Series Ultra Black solar panels?

WINAICO provides a 30-year product warranty and a 30-year power performance warranty on the WBC Ultra Black series, among the longest warranty periods available on the market. This level of coverage is typical for Tier 1 manufacturers and reflects confidence in the high-quality materials used, including n-type cells and double-glass construction, ensuring long-term durability.


### Is WINAICO a Tier 1 solar panel manufacturer, and what does that mean for buyers investing in a PV installation?

Yes, WINAICO, headquartered in Taiwan, is listed as a Tier 1 manufacturer according to Bloomberg New Energy Finance. Tier 1 status indicates financial stability, extensive production experience, and bankability, which matters when financing an installation through a loan or lease. For buyers, it also provides greater assurance that the 30-year warranty will be honored throughout its term.


### Do WBC Ultra Black modules perform well in high temperatures, and does summer heat affect their output?

The WBC Ultra Black series, like most n-type monocrystalline modules, has a relatively low power temperature coefficient (around -0.26%/°C), meaning less output loss at high operating temperatures compared to older p-type technologies. The glass-glass construction also aids heat dissipation, which matters for roofs with limited ventilation during summer months.


### Does the uniform all-black appearance of the WBC Ultra Black panels reduce their rated power compared to standard panels?

No, the aesthetic black frame and black backsheet area between cells in the WBC Ultra Black series do not significantly reduce power output compared to standard white-backsheet versions, since Back Contact technology eliminates visible front-side busbars. This allows the module to reach up to 505 Wp while maintaining the uniform black aesthetic valued in residential installations visible from street level.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/WINAICO_WST-505BKX54-B2_AUS_CEC_0926-27b653b106b0.pdf)


## Alternatives


| Panel | Power | How it differs |
| --- | --- | --- |
| [Jinko Solar JKM510T-48HL6M-DB](https://comparepv.com/panel/jinko-solar-jkm510t-48hl6m-db) | 510 W | Cooler, lighter, +0.8 pp |
| [Jinko Solar JKM505T-48HL6M-DB](https://comparepv.com/panel/jinko-solar-jkm505t-48hl6m-db) | 505 W | Cooler, lighter, +0.6 pp |
| [Jinko Solar JKM500T-48HL6M-DB](https://comparepv.com/panel/jinko-solar-jkm500t-48hl6m-db) | 500 W | Cooler, lighter, +0.3 pp |
| [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | Cooler, lighter, +0.3 pp |
| [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | -10 W, lighter |
| [Jinko Solar JKM495T-48HL6M-DB](https://comparepv.com/panel/jinko-solar-jkm495t-48hl6m-db) | 495 W | -10 W, cooler, lighter |
| [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | Cooler, lighter |
| [Maxeon SPR-BE54-HD505](https://comparepv.com/panel/maxeon-spr-be54-hd505) | 505 W | Heavier, +10 yr warranty |
| [WINAICO WST-475BDX54-A2](https://comparepv.com/panel/winaico-wst-475bdx54-a2) | 475 W | -30 W, -1.4 pp |
| [WINAICO WST-480BDX54-B2](https://comparepv.com/panel/winaico-wst-480bdx54-b2) | 480 W | -25 W, -1.2 pp |
| [WINAICO WST-485BDX54-A2](https://comparepv.com/panel/winaico-wst-485bdx54-a2) | 485 W | -20 W, -0.9 pp |
| [WINAICO WST-490BDX54-A2](https://comparepv.com/panel/winaico-wst-490bdx54-a2) | 490 W | -15 W, -0.7 pp |


---

Source: https://comparepv.com/panel/winaico-wst-505bkx54-b2

Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.

