---
title: "WINAICO WST-445NGX54-AW Solar Panel: Specs & Datasheet | ComparePV"
description: "WINAICO WST-445NGX54-AW solar panel. Specs: 22.80% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient."
source: "https://comparepv.com/panel/winaico-wst-445ngx54-aw"
image: "https://comparepv.com/og/panel/winaico-wst-445ngx54-aw.png"
updated: 2026-11-06
---

# WINAICO WST-445NGX54-AW

Efficiency leader, weak in heat

1,232 panels in the segment TOPCon 400-450 W


## Identity

- **Manufacturer:** WINAICO
- **Model:** WST-445NGX54-AW
- **Series:** WST-NGX54-AW
- **Rated power:** 445 W
- **Cell technology:** TOPCon
- **Bifacial:** yes


## How it compares

Compared against segment TOPCon 400-450 W (1232 panels).


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Power (Wp) | 445 W | 435 W | Strong - top 8% |  |
| Module efficiency | 22.80% | 22.00% | Strong - top 1% | 2,864 |
| Power density | 227.9 | 220.2 | Strong - top 2% | 2,942 |
| Temperature coefficient | -0.310 | -0.290 | Weak - bottom 11% | 8,230 |
| Weight (kg) | 25.0 kg | 22.0 kg | Weak - bottom 22% |  |
| Performance warranty | 30 yrs | 30 yrs | Typical | 31 |


### Full peer table


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Module efficiency | 22.80% | 22.00% | Strong - top 1% | 2,864 |
| Power density | 227.9 | 220.2 | Strong - top 2% | 2,942 |
| Temperature coefficient | -0.310 | -0.290 | Weak - bottom 11% | 8,230 |
| Weight per kWp | 56.2 | 51.7 | Weak - bottom 22% | 10,689 |
| Performance warranty | 30 yrs | 30 yrs | Typical | 31 |


### Strengths

- **22.80% module efficiency** - Top 1% of the TOPCon 400-450 W segment, against a median of 22.00%. Ranked 2,864th in the whole database.
- **227.9 watts per square metre** - Top 2% of the TOPCon 400-450 W segment, against a median of 220.2. Ranked 2,942nd in the whole database.


### Watch out for

- **-0.310 %/°C temperature coefficient** - Bottom 11% of the TOPCon 400-450 W segment, against a median of -0.290.
- **56.2 kg per kWp** - Bottom 22% of the TOPCon 400-450 W segment, against a median of 51.7.

- **Best for:** Residential, commercial and shaded-installations.
- **Not ideal for:** Hot climates and weight-limited structures.


## Specification


### Electrical

- **Rated power (Pmax):** 445 W
- **Efficiency:** 22.80 %
- **Voltage at Pmax (Vmp):** 33.32 V
- **Current at Pmax (Imp):** 13.36 A
- **Open-circuit voltage (Voc):** 39.30 V
- **Short-circuit current (Isc):** 13.88 A
- **Max system voltage:** 1500 V


### Temperature

- **Temperature coefficient of Pmax:** -0.310 %/degC
- **Temperature coefficient of Voc:** -0.250 %/degC
- **Temperature coefficient of Isc:** 0.050 %/degC
- **NOCT:** 42 degC


### Cell and construction

- **Cell type:** Monocrystalline
- **Cell technology:** TOPCon
- **Cell count:** 108
- **Bifacial:** yes
- **Bifacial gain:** 20.00


### Physical

- **Length:** 1722 mm
- **Width:** 1134 mm
- **Thickness:** 40 mm
- **Weight:** 25.0 kg
- **Area:** 1.95 m2
- **Power density:** 227.9 Wp/m2


### Warranty and degradation

- **Product warranty:** 15 years
- **Performance warranty:** 30 years
- **Output guaranteed at end of warranty:** 87.4 %
- **First-year degradation:** 1.00 %
- **Annual degradation:** 0.40 %
- **Output after 30 years:** 389 W


## Rank in the whole catalogue


| Measure | Position |
| --- | --- |
| Efficiency | 2864 of 14354 |
| Power density | 2942 of 14354 |
| Temperature coefficient | 8230 of 14354 |
| Weight | 10689 of 14354 |
| Warranty | 31 of 14354 |


## Pros

- **N-type TOPCon cells** - N-type TOPCon technology delivers higher efficiency (up to 23%) and lower LID/LeTID degradation compared to classic P-type PERC cells, resulting in higher lifetime energy yield.
- **Glass-glass construction and bifacial design** - Double glass instead of a rear polymer backsheet significantly improves resistance to moisture, PID, and microcracks, while the bifacial design captures additional ground-reflected light, meaningfully lowering LCOE over decades of operation.
- **30-year linear power warranty** - A 30-year performance warranty is in line with top-tier standards for glass-glass modules and clearly exceeds the typical 25-year warranty offered on standard glass-backsheet panels.
- **Tier-1 manufacturer with two decades of track record** - WINAICO (Taiwan, founded 2003) is a bankable Tier-1 manufacturer, meaning lower insolvency risk and more reliable warranty enforcement compared to lesser-known peer brands such as SunKean or Sunket New Energy.
- **Half-cut cells in 6 independent strings** - The six-string half-cut cell layout limits power loss under partial shading (e.g., from chimneys or trees), a meaningful advantage in non-ideal installation conditions.


## Cons

- **Slightly lower efficiency than some peers** - The 23% peak efficiency is marginally lower than the 23.04% claimed by SunKean and Sunket New Energy at the same 450 Wp power class - the gap is practically negligible in real-world yield but worth noting in a spec-sheet comparison.


## About this series

The **WST-NGX54-AW** series is built for commercial and residential installations where getting the most energy out of every available rooftop or ground-mount square meter matters most. The modules use **N-type TOPCon cells** in a **glass-glass** construction, delivering better resistance to microcracks, PID degradation, and moisture ingress than conventional glass-backsheet panels. Thanks to the **bifacial** design, the panels capture additional reflected energy from the ground or roof surface, which meaningfully lowers the levelized cost of energy (LCOE) over the system's operating life. The half-cut cell layout, arranged across six independent strings, reduces losses under partial shading, while a low power temperature coefficient keeps output stable even on hot summer days. This makes the series a strong fit for investors who prioritize durability and predictable returns over headline wattage alone. A robust frame, a sealed IP68 junction box, and certified fire resistance round out a module built for installers and owners who value system safety along with the manufacturer's long-term warranty, which includes a linear performance guarantee stretched across decades of operation.


## Notable figures

- Efficiency of 22.8% is 0.8pp above the \*\*TOPCon 400-450W\*\* median (22.0%)
- Power density of 227.9 W/m² packs 7.7 W/m² more into the same footprint vs \*\*TOPCon 400-450W\*\* median (220.2 W/m²)
- Temperature coefficient of -0.31%/°C is 0.02pp worse than \*\*TOPCon 400-450W\*\* median (-0.29%/°C) - higher losses in summer heat
- Weight of 25.0 kg is 3.0 kg above \*\*TOPCon 400-450W\*\* median (22.0 kg) - verify structural support
- Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof


## Questions


### Are WST-NGX54-AW panels bifacial and how does that affect energy production?

Yes, the WST-NGX54-AW series uses a bifacial glass-glass design, allowing the module to capture light reflected off the ground on its rear side as well. This typically results in an additional energy yield compared to monofacial panels, especially over bright surfaces such as gravel, concrete, or white roofing membrane. This effect meaningfully lowers the LCOE over the system's operating lifetime.


### How does the N-type TOPCon technology in WST-NGX54-AW differ from older PERC cells?

N-type TOPCon cells offer higher conversion efficiency and a lower power temperature coefficient than conventional P-type PERC cells, meaning smaller output losses on hot days. TOPCon also shows lower PID degradation and better resistance to microcracks, especially when paired with the glass-glass construction used in this series. For investors, this means more stable energy yield over the long term.


### What warranty comes with WINAICO WST-NGX54-AW panels?

The manufacturer provides a 15-year product warranty along with a 30-year linear performance warranty. This means the module is expected to maintain its rated power output for significantly longer than standard panels with typical 25-year warranties, which is characteristic of premium solutions built on TOPCon cells and double glass.


### Are WST-NGX54-AW modules suitable for commercial installations on large roof areas?

Yes, the WST-NGX54-AW series was specifically designed for commercial installations and larger ground-mounted systems where maximizing the use of available mounting area matters. With up to 450 Wp per module and six independent strings dividing the cells, shading losses are minimized, which is important on large industrial roofs with obstructions such as vents or air conditioning units.


### Is it worth choosing the glass-glass WST-NGX54-AW over a cheaper glass-backsheet module?

The glass-glass construction increases resistance to moisture, microcracks, and PID degradation compared to a standard glass-backsheet laminate, resulting in longer lifespan and lower risk of power loss over time. This is particularly justified for installations in harsh climates or for budgets planned around a 25-30 year operating horizon, where material durability outweighs a lower upfront purchase cost.


### Is WINAICO a reliable Tier 1 solar panel manufacturer?

WINAICO is a Taiwan-based Tier 1 classified manufacturer, indicating strong financial stability, bankability, and a proven ability to honor warranty obligations over the long term. This classification matters to investors and project financiers since it reduces the risk associated with manufacturer insolvency during the warranty period.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/WINAICO_WST-450NGX54-AW_TW_0326-537ed3c20d26.pdf)


## Alternatives


| Panel | Power | How it differs |
| --- | --- | --- |
| [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | +50 W, cooler, +2.0 pp |
| [Jinko Solar JKM495T-48HL6M-DB](https://comparepv.com/panel/jinko-solar-jkm495t-48hl6m-db) | 495 W | +50 W, cooler, +2.0 pp |
| [Jinko Solar JKM490T-48HL6M-DB](https://comparepv.com/panel/jinko-solar-jkm490t-48hl6m-db) | 490 W | +45 W, cooler, +1.7 pp |
| [AIKO AIKO-A490-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a490-mce54mw) | 490 W | +45 W, cooler, +1.7 pp |
| [Suntech STP-NT11/48QGSF-490](https://comparepv.com/panel/suntech-stp-nt11-48qgsf-490) | 490 W | +45 W, cooler, +1.7 pp |
| [JA Solar JAT54S40-485/LR](https://comparepv.com/panel/ja-solar-jat54s40-485-lr) | 485 W | Cooler, lighter, +1.5 pp |
| [AIKO AIKO-A485-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a485-mce54mw) | 485 W | +40 W, cooler, +1.5 pp |
| [Longi Solar LR7-54HJD-495M](https://comparepv.com/panel/longi-lr7-54hjd-495m) | 495 W | +50 W, cooler, +1.5 pp |
| [WINAICO WST-400MGX-P3 Full Black](https://comparepv.com/panel/winaico-wst-400mgx-p3-full-black) | 400 W | -45 W, -2.4 pp, -5 yr warranty |
| [WINAICO WST-400MGX-P1 Full Black](https://comparepv.com/panel/winaico-wst-400mgx-p1-full-black) | 400 W | -45 W, -2.4 pp, -5 yr warranty |
| [WINAICO WST-405MGX-E5](https://comparepv.com/panel/winaico-wst-405mgx-e5) | 405 W | -40 W, -2.0 pp, -5 yr warranty |
| [WINAICO WST-405MGX-P3](https://comparepv.com/panel/winaico-wst-405mgx-p3) | 405 W | -40 W, -2.1 pp, -5 yr warranty |
| [WINAICO WST-410MGX-P3](https://comparepv.com/panel/winaico-wst-410mgx-p3) | 410 W | Hotter, -1.9 pp, -5 yr warranty |
| [WINAICO WST-410MGX-E3](https://comparepv.com/panel/winaico-wst-410mgx-e3) | 410 W | -35 W, -1.8 pp, -5 yr warranty |
| [Jinko Solar JKM510T-48HL6M-DB](https://comparepv.com/panel/jinko-solar-jkm510t-48hl6m-db) | 510 W | +65 W, cooler, +2.7 pp |
| [Jinko Solar JKM505T-48HL6M-DB](https://comparepv.com/panel/jinko-solar-jkm505t-48hl6m-db) | 505 W | +60 W, cooler, +2.5 pp |


---

Source: https://comparepv.com/panel/winaico-wst-445ngx54-aw

Not in this file, on the page: a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.

