---
title: "WINAICO WST-405MGX-P3 Solar Panel: Specs & Datasheet | ComparePV"
description: "WINAICO WST-405MGX-P3 solar panel. Specs: 20.70% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient."
source: "https://comparepv.com/panel/winaico-wst-405mgx-p3"
image: "https://comparepv.com/og/panel/winaico-wst-405mgx-p3.png"
updated: 2026-11-14
---

# WINAICO WST-405MGX-P3

Middle of its segment, short guarantee

6,889 panels in the 305-505 W band, all technologies


## Identity

- **Manufacturer:** WINAICO
- **Model:** WST-405MGX-P3
- **Series:** WST-MGX-P3
- **Rated power:** 405 W
- **Cell technology:** Monocrystalline


## How it compares

Compared against 305-505 W band, all technologies (6889 panels).


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Power (Wp) | 405 W | 435 W | Typical |  |
| Module efficiency | 20.70% | 21.32% | Typical | 11,012 |
| Power density | 207.0 | 212.8 | Typical | 11,134 |
| Temperature coefficient | -0.350 | -0.300 | Weak - bottom 23% | 10,660 |
| Weight (kg) | 21.5 kg | 22.8 kg | Typical |  |
| Performance warranty | 25 yrs | 30 yrs | Weak - bottom 18% | 10,073 |


### Full peer table


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Module efficiency | 20.70% | 21.32% | Typical | 11,012 |
| Power density | 207.0 | 212.8 | Typical | 11,134 |
| Temperature coefficient | -0.350 | -0.300 | Weak - bottom 23% | 10,660 |
| Weight per kWp | 53.1 | 53.2 | Typical | 6,999 |
| Performance warranty | 25 yrs | 30 yrs | Weak - bottom 18% | 10,073 |


### Watch out for

- **25 year performance warranty** - Bottom 18% of the 305-505 W band, against a median of 30 yrs.
- **-0.350 %/°C temperature coefficient** - Bottom 23% of the 305-505 W band, against a median of -0.300.

- **Best for:** Residential, commercial and shaded-installations.
- **Not ideal for:** Owners who want a long output guarantee and hot climates.


## Specification


### Electrical

- **Rated power (Pmax):** 405 W
- **Efficiency:** 20.70 %
- **Voltage at Pmax (Vmp):** 30.82 V
- **Current at Pmax (Imp):** 13.15 A
- **Open-circuit voltage (Voc):** 37.31 V
- **Short-circuit current (Isc):** 13.81 A
- **Max system voltage:** 1500 V


### Temperature

- **Temperature coefficient of Pmax:** -0.350 %/degC
- **Temperature coefficient of Voc:** -0.270 %/degC
- **Temperature coefficient of Isc:** 0.040 %/degC
- **NOCT:** 44 degC


### Cell and construction

- **Cell type:** Monocrystalline
- **Cell count:** 108


### Physical

- **Length:** 1724 mm
- **Width:** 1135 mm
- **Thickness:** 40 mm
- **Weight:** 21.5 kg
- **Area:** 1.96 m2
- **Power density:** 207.0 Wp/m2


### Warranty and degradation

- **Product warranty:** 15 years
- **Performance warranty:** 25 years
- **Output guaranteed at end of warranty:** 85.3 %
- **First-year degradation:** 2.00 %
- **Annual degradation:** 0.53 %
- **Output after 30 years:** 335 W


## Rank in the whole catalogue


| Measure | Position |
| --- | --- |
| Efficiency | 11012 of 14354 |
| Power density | 11134 of 14354 |
| Temperature coefficient | 10660 of 14354 |
| Weight | 6999 of 14354 |
| Warranty | 10073 of 14354 |


## Pros

- **N-type TOPCon + half-cut cell technology** - The combination of n-type TOPCon cells with half-cut cell design reduces resistive losses and improves performance under partial shading, resulting in more stable annual energy yield and lower power degradation compared to legacy PERC modules.
- **High power density on 108-cell layout** - The 108-cell layout within a single frame delivers up to 455 Wp from a limited module footprint, which is a key advantage for residential and commercial installations with constrained roof area.
- **Robust build quality and IP68 connectors** - A reinforced frame and IP68-rated MC4 connectors provide resistance to harsh weather conditions (wind, snow, moisture), supporting a long and trouble-free system lifetime.
- **Tier-1 bankable manufacturer, 25-year power warranty** - WINAICO is a Tier-1 bankable manufacturer operating since 2003 (Taiwan), and the WST-MGX-P3 series carries a 25-year power output warranty, lowering long-term investment risk from an LCOE perspective.


## Cons

- **Production discontinued (2022-2023)** - The WST-MGX-P3 series was discontinued after a short production run (launched 2022, discontinued 2023), meaning limited availability of matching modules for system expansion/replacement and potentially harder access to spare parts going forward.
- **Lower efficiency vs. segment peers** - At 20.3-21% efficiency, the series trails comparable 450+ Wp models on the market, such as LEDVANCE M435~455N54LB (22.77%), Sunlike SKT420~455M10 (22.8%), and Solitek SOLRIF D Black (22.56%) - a 1.5-2.5 pp gap means more roof area is needed to reach the same installed capacity.
- **Shorter product warranty than some competitors** - The 15-year product warranty (alongside a 25-year power warranty) meets market baseline, but some Tier-1 competitors in this segment now offer 20-25 year product warranties, which, combined with the discontinued production status, adds some risk for future service claims.


## About this series

The WINAICO WST-MGX-P3 series, also marketed as GEMINI, is built around **n-type TOPCon technology** and **half-cut cell** design, a combination that reduces current losses and keeps the panel performing better under partial shading. This construction translates into more stable year-round energy yield and lower power degradation over the panel's lifetime compared to conventional PERC modules. The 108-cell layout packed into a single frame delivers high power density per roof area, which matters most in residential and commercial installations where mounting space is limited. A robust frame and IP68-rated MC4 connectors give the module strong resistance to harsh weather conditions and support long-term reliability. WINAICO backs this series with a **25-year product warranty**, activated upon installation registration, adding an extra layer of protection for the investment. By pairing high conversion efficiency with low degradation rates, the WST-MGX-P3 series suits buyers focused on maximizing energy output on constrained roof space and lowering LCOE over the long run, without sacrificing durability.


## Notable figures

- Efficiency of 20.7% is 1.2pp below the \*\*database\*\* median (21.9%)
- 207.0 W/m² power density is 11.3 W/m² below \*\*database\*\* median (218.3 W/m²) - requires larger installation area
- -0.35%/°C temperature coefficient - 0.05pp worse than \*\*database\*\* median (-0.30%/°C), expect higher hot weather losses
- At 21.5 kg, this panel is 5.0 kg lighter than \*\*database\*\* median (26.5 kg) - easier handling during installation
- In the top 77% for efficiency among all N-type panels


## Questions


### Is the WINAICO WST-MGX-P3 (GEMINI) series still available for purchase?

The WST-MGX-P3 series, marketed as GEMINI, has been discontinued by WINAICO and replaced by newer TOPCon models. Availability is now limited to remaining distributor stock. Anyone planning to expand an existing installation with identical panels should act quickly, as matching the appearance and specifications may become impossible once stock runs out.


### What is the maximum power output of the WST-MGX-P3 series, and is it high?

Modules in the WST-MGX-P3 series reach a maximum power output of up to 455 Wp. This is a strong result for a 108-cell half-cut module, delivering high power density per roof area. For installations with limited space, this means fewer panels are needed to reach the same total system power compared to older PERC modules.


### What warranty applies to WINAICO WST-MGX-P3 panels?

WINAICO offers a 15-year product warranty and a 25-year power performance warranty on the WST-MGX-P3 series. The product warranty is activated after registering the installation on the manufacturer's website, an important step that protects the investor. Despite the series being discontinued, the warranty terms remain valid for already purchased and registered panels.


### How does TOPCon technology in the WST-MGX-P3 differ from older PERC panels?

The n-type TOPCon technology used in the WST-MGX-P3 reduces current losses and delivers lower power degradation over successive years of operation compared to classic PERC modules. Combined with half-cut cells, it further improves module performance under partial shading, such as from chimneys or antennas. In practice, this results in more stable year-round energy yield and a lower levelized cost of energy (LCOE) over the system's lifetime.


### Is WINAICO a reliable manufacturer, and where are WST-MGX-P3 panels made?

WINAICO is a Taiwan-based Tier 1 manufacturer, indicating strong financial stability and warranty reliability confirmed by independent industry rankings. WST-MGX-P3 series panels are produced under rigorous quality standards, with a solid frame and IP68-rated MC4 connectors ensuring resistance to harsh weather conditions throughout the installation's lifetime.


### Are WST-MGX-P3 panels bifacial, and does that matter for installation?

No, the WST-MGX-P3 series consists of monofacial panels, not bifacial ones. This means energy production occurs only on the front side of the module, eliminating the need for a light-reflective surface beneath the panel. For typical pitched-roof installations, this makes the panels simpler to install while remaining just as efficient as other single-sided TOPCon modules.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/WINAICO_WST-410MGX-P3_TW_0923-fd3b22e47d79.pdf)


## Alternatives


| Panel | Power | How it differs |
| --- | --- | --- |
| [AIKO AIKO-455-MAH54Db](https://comparepv.com/panel/aiko-aiko-455-mah54db) | 455 W | +50 W, cooler, +2.6 pp |
| [Longi Solar LR5-54HTH-455M](https://comparepv.com/panel/longi-lr5-54hth-455m) | 455 W | +50 W, cooler, +2.6 pp |
| [Yingli YL455CF54 e/2](https://comparepv.com/panel/yingli-yl455cf54-e-2) | 455 W | +50 W, cooler, +2.6 pp |
| [Einnova Solarline ESM-455T](https://comparepv.com/panel/einnova-solarline-esm-455t) | 455 W | +50 W, +2.6 pp, +5 yr warranty |
| [SunEvo Solar SE5-54HBC-455W](https://comparepv.com/panel/sunevo-solar-se5-54hbc-455w) | 455 W | +50 W, cooler, +2.6 pp |
| [Just Solar JST-EDMH-(445-465)W-TD (455W class)](https://comparepv.com/panel/just-solar-jst-edmh-445-465-w-td-455w-class) | 455 W | +50 W, +2.6 pp, +5 yr warranty |
| [Luxor Solar LX-455M/182R-96+ GG](https://comparepv.com/panel/luxor-lx-455m-182r-96-gg) | 455 W | +50 W, cooler, +2.6 pp |
| [WINAICO WST-400MGX-P3 Full Black](https://comparepv.com/panel/winaico-wst-400mgx-p3-full-black) | 400 W | -0.3 pp |
| [WINAICO WST-400MGX-P1 Full Black](https://comparepv.com/panel/winaico-wst-400mgx-p1-full-black) | 400 W | -0.3 pp |
| [WINAICO WST-405MGX-E5](https://comparepv.com/panel/winaico-wst-405mgx-e5) | 405 W | Cooler |
| [WINAICO WST-410MGX-P3](https://comparepv.com/panel/winaico-wst-410mgx-p3) | 410 W | +0.2 pp |
| [WINAICO WST-410MGX-E3](https://comparepv.com/panel/winaico-wst-410mgx-e3) | 410 W | +0.3 pp |
| [Jinko Solar JKM510T-48HL6M-DB](https://comparepv.com/panel/jinko-solar-jkm510t-48hl6m-db) | 510 W | +105 W, cooler, +4.8 pp |
| [Jinko Solar JKM505T-48HL6M-DB](https://comparepv.com/panel/jinko-solar-jkm505t-48hl6m-db) | 505 W | +100 W, cooler, +4.6 pp |
| [Jinko Solar JKM500T-48HL6M-DB](https://comparepv.com/panel/jinko-solar-jkm500t-48hl6m-db) | 500 W | +95 W, cooler, +4.3 pp |
| [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | +105 W, cooler, +4.3 pp |


---

Source: https://comparepv.com/panel/winaico-wst-405mgx-p3

Not in this file, on the page: a thirty-year output simulator and alternatives filtered by how closely they match these dimensions.

