---
title: "WINAICO WST-333MG Solar Panel: Specs & Datasheet | ComparePV"
description: "WINAICO WST-333MG solar panel. Specs: 20.27% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient."
source: "https://comparepv.com/panel/winaico-wst-333mg"
image: "https://comparepv.com/og/panel/winaico-wst-333mg.png"
updated: 2026-11-14
---

# WINAICO WST-333MG

Solid all-round for its segment

3,500 panels in the 233-433 W band, all technologies


## Identity

- **Manufacturer:** WINAICO
- **Model:** WST-333MG
- **Series:** WST-MG GEMINI
- **Rated power:** 333 W
- **Cell technology:** Monocrystalline


## How it compares

Compared against 233-433 W band, all technologies (3500 panels).


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Power (Wp) | 333 W | 397 W | Weak - bottom 17% |  |
| Module efficiency | 20.27% | 20.41% | Typical | 12,136 |
| Power density | 202.7 | 203.9 | Typical | 12,104 |
| Temperature coefficient | -0.350 | -0.340 | Typical | 10,660 |
| Weight (kg) | 18.6 kg | 21.4 kg | Typical |  |
| Performance warranty | 25 yrs | 25 yrs | Typical | 10,073 |


### Full peer table


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Module efficiency | 20.27% | 20.41% | Typical | 12,136 |
| Power density | 202.7 | 203.9 | Typical | 12,104 |
| Temperature coefficient | -0.350 | -0.340 | Typical | 10,660 |
| Weight per kWp | 55.9 | 55.3 | Typical | 10,461 |
| Performance warranty | 25 yrs | 25 yrs | Typical | 10,073 |

- **Best for:** Residential, commercial and shaded-installations.


## Specification


### Electrical

- **Rated power (Pmax):** 333 W
- **Efficiency:** 20.27 %
- **Voltage at Pmax (Vmp):** 30.80 V
- **Current at Pmax (Imp):** 10.82 A
- **Open-circuit voltage (Voc):** 36.72 V
- **Short-circuit current (Isc):** 11.39 A
- **Max system voltage:** 1000 V


### Temperature

- **Temperature coefficient of Pmax:** -0.350 %/degC
- **Temperature coefficient of Voc:** -0.280 %/degC
- **Temperature coefficient of Isc:** 0.040 %/degC
- **NOCT:** 44 degC


### Cell and construction

- **Cell type:** Monocrystalline
- **Cell count:** 108


### Physical

- **Length:** 1589 mm
- **Width:** 1034 mm
- **Thickness:** 35 mm
- **Weight:** 18.6 kg
- **Area:** 1.64 m2
- **Power density:** 202.7 Wp/m2


### Warranty and degradation

- **Product warranty:** 25 years
- **Performance warranty:** 25 years
- **Output guaranteed at end of warranty:** 85.3 %
- **First-year degradation:** 2.00 %
- **Annual degradation:** 0.53 %
- **Output after 30 years:** 275 W


## Rank in the whole catalogue


| Measure | Position |
| --- | --- |
| Efficiency | 12136 of 14354 |
| Power density | 12104 of 14354 |
| Temperature coefficient | 10660 of 14354 |
| Weight | 10461 of 14354 |
| Warranty | 10073 of 14354 |


## Pros

- **High power output for standard module size** - Using half-cut cell technology with multi-busbar interconnection, the series reaches up to 375 Wp at up to 20.62% efficiency, placing it among the top mono-PERC designs from 2021 and on par with current competitors such as ENCOR EC (20.59%).
- **Tier-1 manufacturer, bankable investment** - WINAICO is a Tier-1, bankable manufacturer from Taiwan, operating since 2003 and recognized as an EUPD Top Brand PV, which improves project financeability with banks and leasing providers.
- **25-year product and performance warranty** - The series carries a 25-year product warranty and a 25-year performance warranty, matching the upper end of market standards for mono-PERC modules from this era and exceeding the typical 10-12 year product warranty offered by Tier-2 manufacturers.
- **PID and LeTID resistance** - GEMINI series modules pass PID testing (IEC TS 62804-1) and show LeTID resistance, limiting early-years power degradation compared to standard PERC cells without additional stabilization treatment.
- **100% electroluminescence quality control** - Every module undergoes electroluminescence inspection to eliminate microcracks invisible to the naked eye, a practice typically reserved for premium manufacturers rather than a segment-wide standard.


## Cons

- **Discontinued production, limited availability** - The WST-MG GEMINI series (launched in 2021) has been discontinued, meaning limited availability for expanding existing installations and potential difficulties fulfilling warranty claims requiring identical replacement modules.
- **Efficiency below current N-type solutions** - A maximum efficiency of 20.62% is typical for 2021-era mono-PERC technology but lower than newer N-type/TOPCon competitors (e.g., JS Solar JSHC166M120 at 21.3%), meaning lower energy yield for the same roof area.
- **No bifacial variant** - The series is monofacial only, excluding the additional albedo-driven energy yield available with bifacial series of comparable power class in ground-mount or high-reflectance installations.


## About this series

The WST-MG GEMINI series from WINAICO is engineered for maximum power density on limited roof space, making it a strong fit for both residential and commercial installations. At its core is **half-cut cell technology with a multi-busbar design** combined with reflective interconnect wiring, which reduces resistive losses and improves partial shading tolerance, translating into higher real-world energy yield. The modules use monocrystalline silicon cells with enhanced thermal stability, resulting in lower power degradation over time. The series stands out for its **resistance to PID and LeTID degradation**, verified through testing that goes well beyond IEC standards, and **100% electroluminescence quality inspection**, which eliminates micro-cracks and defects invisible to the naked eye. WINAICO, a Taiwanese manufacturer operating since 2008 and recognized with the EUPD Top Brand PV award, backs this series with a **25-year product and performance warranty**, making it a secure long-term investment. An elegant **Full Black version** is also available, ideal for installers and homeowners who want a uniform, modern roof aesthetic without compromising on energy performance.


## Notable figures

- Efficiency of 20.3% is 1.6pp below the \*\*database\*\* median (21.9%)
- 202.7 W/m² power density is 15.6 W/m² below \*\*database\*\* median (218.3 W/m²) - requires larger installation area
- Temperature coefficient of -0.35%/°C is 0.05pp worse than \*\*database\*\* median (-0.30%/°C) - higher losses in summer heat
- 18.6 kg weight - 7.9 kg lighter than \*\*database\*\* median (26.5 kg), reducing installation effort
- Ranked #12136 out of 14354 panels for efficiency in the database


## Questions


### Is the WINAICO WST-MG GEMINI series still available for purchase?

The WST-MG GEMINI series has been discontinued and replaced by newer WINAICO models. This means new units may only be available through remaining distributor stock, and once that inventory is depleted, the panel will no longer be manufactured. Despite discontinuation, the 25-year product and performance warranty remains fully honored by WINAICO for modules already purchased and installed.


### What is the maximum power output of WST-MG GEMINI panels, and is it competitive among monocrystalline panels?

WST-MG GEMINI modules reach a maximum power output of up to 375 Wp. This is achieved through half-cut cell technology with multi-busbar interconnection, which reduces resistive losses and increases power density per panel area. At the time this series launched, this was a very competitive rating for monocrystalline panels in the residential and commercial segments.


### How does half-cut cell technology in the WST-MG GEMINI differ from standard full-size cells?

Half-cut technology splits a standard cell into two halves, reducing internal resistive losses and limiting the current flowing through each individual cell. In practice, this results in higher efficiency, better tolerance to partial shading (such as from a chimney or leaves), and lower risk of hot spots. Additionally, the reflective ribbon wire used in the WST-MG GEMINI bounces light back onto the cells, further increasing energy yield.


### Are WST-MG GEMINI panels resistant to PID and LeTID degradation?

Yes, the WST-MG GEMINI series passed testing for Potential-Induced Degradation (PID) and Light and Elevated Temperature-Induced Degradation (LeTID), exceeding IEC standard requirements. This means lower power loss over the system's lifetime, even in high-voltage installations or warmer climates, where LeTID effects tend to be more pronounced in lower-quality panels.


### What is the warranty on WINAICO WST-MG GEMINI panels, and can it be relied on?

WINAICO provides a 25-year product warranty and a 25-year performance warranty on the WST-MG GEMINI series, which was one of the longer terms in the industry at the time of launch. WINAICO has operated since 2008, is a Tier 1 Taiwanese manufacturer, and has repeatedly received the EUPD Top Brand PV award, which supports the credibility of such a long warranty commitment even after the series was discontinued.


### Is a black version of the WST-MG GEMINI panels available for modern roofs?

Yes, the WST-MG GEMINI series was also available in a Full Black version, featuring a black frame and black laminate backsheet with no white gaps between cells. This version is chosen by installers and homeowners who want a uniform, modern rooftop appearance without any compromise in electrical performance compared to the standard silver-framed version.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/d62S2_Datasheet_WST-333MG_AUS_1221_mailing-3-d797bdee7fc2.pdf)


## Alternatives


| Panel | Power | How it differs |
| --- | --- | --- |
| [JA Solar NS-300MH-72](https://comparepv.com/panel/ja-solar-ns-300mh-72) | 300 W | Cooler, lighter, +3.1 pp |
| [PolyCrown Solar Tech NS-300MH-72](https://comparepv.com/panel/polycrown-solar-tech-ns-300mh-72) | 300 W | Cooler, lighter, +3.1 pp |
| [JA Solar NS-330MH-80](https://comparepv.com/panel/ja-solar-ns-330mh-80) | 330 W | Cooler, lighter, +2.9 pp |
| [PolyCrown Solar Tech NS-330MH-80](https://comparepv.com/panel/polycrown-solar-tech-ns-330mh-80) | 330 W | Cooler, lighter, +2.9 pp |
| [Heckert Solar ZEUS 3.2 285WP FullBlack](https://comparepv.com/panel/heckert-solar-zeus-3-2-285wp-fullblack) | 285 W | Cooler, +2.9 pp, +5 yr warranty |
| [Gamko New Energy GKA182M285W](https://comparepv.com/panel/gamko-new-energy-gka182m285w) | 285 W | Lighter, +2.7 pp, +5 yr warranty |
| [Gamko New Energy GKA182M300W](https://comparepv.com/panel/gamko-new-energy-gka182m300w) | 300 W | -33 W, +2.7 pp, +5 yr warranty |
| [Gamko New Energy GKA210M320W](https://comparepv.com/panel/gamko-new-energy-gka210m320w) | 320 W | Lighter, +2.7 pp, +5 yr warranty |
| [Gamko New Energy GKA210M340W](https://comparepv.com/panel/gamko-new-energy-gka210m340w) | 340 W | Lighter, +2.7 pp, +5 yr warranty |
| [Gamko New Energy GKA210M360W](https://comparepv.com/panel/gamko-new-energy-gka210m360w) | 360 W | +27 W, +2.7 pp, +5 yr warranty |
| [Phono Solar NS-360MH-60](https://comparepv.com/panel/phono-solar-ns-360mh-60) | 360 W | +27 W, cooler, +1.9 pp |
| [PolyCrown Solar Tech NS-360MH-60](https://comparepv.com/panel/polycrown-solar-tech-ns-360mh-60) | 360 W | +27 W, cooler, +1.9 pp |
| [DMEGC GH410M10RT-G48HSW-LC](https://comparepv.com/panel/hengdian-group-dmegc-magnetics-co-ltd-dmegc-solar-gh410m10rt-g48hsw-lc) | 410 W | +77 W, cooler, +1.6 pp |
| [DMEGC GH405M10RT-G48HSW-LC](https://comparepv.com/panel/hengdian-group-dmegc-magnetics-co-ltd-dmegc-solar-gh405m10rt-g48hsw-lc) | 405 W | +72 W, cooler, +1.4 pp |
| [Phono Solar NS-350MH-60](https://comparepv.com/panel/phono-solar-ns-350mh-60) | 350 W | +17 W, cooler, +1.2 pp |
| [PolyCrown Solar Tech NS-350MH-60](https://comparepv.com/panel/polycrown-solar-tech-ns-350mh-60) | 350 W | +17 W, cooler, +1.2 pp |


---

Source: https://comparepv.com/panel/winaico-wst-333mg

Not in this file, on the page: a thirty-year output simulator and alternatives filtered by how closely they match these dimensions.

