--- title: "Wanze Energy DLXN-M10-100W 100W Solar Panel - Specs & Review | ComparePV" description: "Wanze Energy DLXN-M10-100W 100W solar panel. Specs: 17.00% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/wanze-energy-dlxn-m10-100w" updated: 2026-09-11 --- # Wanze Energy DLXN-M10-100W Space saver, weak in heat 223 panels in the 0-200 W band, all technologies ## Identity - **Manufacturer:** Wanze Energy - **Model:** DLXN-M10-100W - **Series:** DLXN-M10 - **Rated power:** 100 W - **Cell technology:** Monocrystalline ## How it compares Compared against 0-200 W band, all technologies (223 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 100 W | 140 W | Weak - bottom 17% | | | Module efficiency | 17.00% | 15.70% | Typical | 13,453 | | Power density | 183.4 | 156.3 | Strong - top 15% | 13,131 | | Temperature coefficient | -0.410 | -0.370 | Weak - bottom 6% | 13,738 | | Weight (kg) | 5.8 kg | 11.2 kg | Strong - top 18% | | | Performance warranty | 10 yrs | 25 yrs | Weak - bottom 15% | 13,806 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 17.00% | 15.70% | Typical | 13,453 | | Power density | 183.4 | 156.3 | Strong - top 15% | 13,131 | | Temperature coefficient | -0.410 | -0.370 | Weak - bottom 6% | 13,738 | | Weight per kWp | 58.3 | 72.0 | Strong - top 18% | 11,646 | | Performance warranty | 10 yrs | 25 yrs | Weak - bottom 15% | 13,806 | ### Strengths - **183.4 watts per square metre** - Top 15% of the 0-200 W band, against a median of 156.3. - **58.3 kg per kWp** - Top 18% of the 0-200 W band, against a median of 72.0. ### Watch out for - **-0.410 %/°C temperature coefficient** - Bottom 6% of the 0-200 W band, against a median of -0.370. Ranked 13,738th in the whole database. - **10 year performance warranty** - Bottom 15% of the 0-200 W band, against a median of 25 yrs. - **Best for:** Roofs where every square metre counts and weight-limited structures. - **Not ideal for:** Hot climates and owners who want a long output guarantee. ## Specification ### Electrical - **Rated power (Pmax):** 100 W - **Efficiency:** 17.00 % - **Voltage at Pmax (Vmp):** 21.03 V - **Current at Pmax (Imp):** 4.76 A - **Open-circuit voltage (Voc):** 24.47 V - **Short-circuit current (Isc):** 5.02 A - **Max system voltage:** 1000 V ### Temperature - **Temperature coefficient of Pmax:** -0.410 %/degC - **Temperature coefficient of Voc:** -0.340 %/degC - **Temperature coefficient of Isc:** 0.060 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell count:** 36 ### Physical - **Length:** 940 mm - **Width:** 580 mm - **Thickness:** 25 mm - **Weight:** 5.8 kg - **Area:** 0.55 m2 - **Power density:** 183.4 Wp/m2 ### Warranty and degradation - **Product warranty:** 5 years - **Performance warranty:** 10 years - **First-year degradation:** 3.00 % - **Annual degradation:** 0.55 % - **Output after 30 years:** 81 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 13453 of 14005 | | Power density | 13131 of 14005 | | Temperature coefficient | 13738 of 14005 | | Weight | 11646 of 14005 | | Warranty | 13806 of 14005 | ## About this series The Wanze Energy DLXN-M10 photovoltaic panel series utilizes **modern M10-type cells** with an optimal size of 182 mm, which translates into significantly higher power density and better conversion efficiency compared to market standards. Thanks to the use of **Half-Cut and Multi-Busbar** technology, these modules exhibit minimal energy losses due to internal resistance and excellent resistance to the negative effects of shading. This is a key solution for investors looking for maximum yield from limited roof or ground space. The DLXN-M10 design has been precisely engineered to reduce balance of system (BOS) costs, offering an ideal balance between voltage and current, which significantly simplifies inverter selection and lowers cabling expenses. These panels are distinguished by **exceptional resistance to PID degradation** and above-average mechanical strength against atmospheric loads. They solve the common problem of efficiency drops at high temperatures, ensuring stable and safe power production for many years. This series is designed for demanding residential users and professional solar farms that prioritize the **lowest Levelized Cost of Energy (LCOE)**. What distinguishes them from the competition is an innovative approach to material durability and rigorous quality testing, which guarantees reliability in any climate. ## Notable figures - At 17.0% efficiency, this panel is 4.8pp below the \*\*database\*\* median of 21.8% - At 183.4 W/m², this panel generates 34.7 W/m² less per unit area than \*\*database\*\* median (218.1 W/m²) - At -0.41%/°C, loses 0.11pp more power per degree than \*\*database\*\* median (-0.30%/°C) - 5.8 kg weight - 20.7 kg lighter than \*\*database\*\* median (26.5 kg), reducing installation effort - In the top 96% for efficiency among all N-type panels ## Questions ### How do the M10 cells used in Wanze Energy DLXN-M10 panels differ from older cell types? M10 cells measure 182 mm, larger than older wafer standards, allowing more active surface area on the same module footprint. This lets the panel generate higher power from the same roof or ground space. Combined with Half-Cut and Multi-Busbar technology, this results in better conversion efficiency and reduced current losses under partial shading. ### What are Half-Cut and Multi-Busbar technologies in the DLXN-M10 series, and do they matter when buying? Half-Cut means cells are split in two, reducing resistive losses and improving performance under partial shading, such as from a chimney or antenna. Multi-Busbar increases the number of conductive paths between cells, reducing microcrack-related losses. For buyers, this means higher real-world energy yield in less-than-ideal sunlight conditions, especially relevant for partially shaded roofs. ### What warranty comes with Wanze Energy DLXN-M10 panels? The manufacturer offers a 5-year product warranty covering material and workmanship defects, plus a 10-year power warranty guaranteeing a defined output level over time. These are standard industry terms, though some Tier 1 manufacturers offer longer periods, so it's worth checking the detailed degradation curve in the datasheet when comparing offers. ### Are DLXN-M10 panels heat resistant and suitable for full sun exposure in summer? Yes, the DLXN-M10 series is engineered to reduce the typical efficiency drop of silicon cells at high operating temperatures. Thanks to Half-Cut technology and lower resistive losses, the panels maintain more stable energy output on hot days compared to older, full-size cell modules. ### Is the Wanze Energy DLXN-M10 a bifacial panel? No, the DLXN-M10 series is monofacial, designed for standard installation on sloped roofs or ground-mounted structures without capturing reflected light on the rear side. Investors seeking extra yield from ground albedo, for example on a ground-mount farm with a reflective surface, should look at a separate bifacial series from the manufacturer. ### Is Wanze Energy a Tier 1 manufacturer, and does that matter when choosing DLXN-M10 panels? Wanze Energy is not currently listed as a Tier 1 manufacturer, a bankability classification based on project financing scale rather than technical quality directly. For a residential buyer this matters less than for large bank-financed solar farms, where Tier 1 status is often a lending requirement. It's more useful to check independent quality certifications and PID resistance test results instead. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/solar-photovoltaic-folding-panns-and-instructions-20240907-7-2320880fb670.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [Gamko New Energy GKA182M150W](https://comparepv.com/panel/gamko-new-energy-gka182m150w) | 150 W | +50 W, +6.0 pp, +20 yr warranty | | [Gamko New Energy GKA182M120W](https://comparepv.com/panel/gamko-new-energy-gka182m120w) | 120 W | +20 W, +6.0 pp, +20 yr warranty | | [Gamko New Energy GKA182M135W](https://comparepv.com/panel/gamko-new-energy-gka182m135w) | 135 W | +35 W, +6.0 pp, +20 yr warranty | | [Gamko New Energy GKA182M100W](https://comparepv.com/panel/gamko-new-energy-gka182m100w) | 100 W | +6.0 pp, +20 yr warranty | | [Gamko New Energy GKA182M110W](https://comparepv.com/panel/gamko-new-energy-gka182m110w) | 110 W | +10 W, +6.0 pp, +20 yr warranty | | [JA Solar NS-100MH-36](https://comparepv.com/panel/ja-solar-ns-100mh-36) | 100 W | Cooler, +4.3 pp, +15 yr warranty | | [PolyCrown Solar Tech NS-100MH-36](https://comparepv.com/panel/polycrown-solar-tech-ns-100mh-36) | 100 W | Cooler, +4.3 pp, +15 yr warranty | | [Renesola YH120W-18M](https://comparepv.com/panel/renesola-yh120w-18m) | 120 W | Cooler, +2.6 pp, +20 yr warranty | | [Easun Power YH100W-12M](https://comparepv.com/panel/easun-power-yh100w-12m) | 100 W | Lighter, +2.6 pp | | [Isola New Energy YH120W-18M](https://comparepv.com/panel/isola-new-energy-yh120w-18m) | 120 W | Cooler, +2.6 pp, +20 yr warranty | | [Renesola YH115W-18M](https://comparepv.com/panel/renesola-yh115w-18m) | 115 W | Cooler, +1.8 pp, +20 yr warranty | | [Isola New Energy YH115W-18M](https://comparepv.com/panel/isola-new-energy-yh115w-18m) | 115 W | Cooler, +1.8 pp, +20 yr warranty | | [LinkSol LKS-5M-115](https://comparepv.com/panel/linksol-lks-5m-115) | 115 W | +15 W | | [Longi Solar DLXN-M10-100W](https://comparepv.com/panel/longi-solar-dlxn-m10-100w) | 100 W | Very close match | | [LinkSol LKS-5M-110](https://comparepv.com/panel/linksol-lks-5m-110) | 110 W | +10 W, -0.5 pp | | [Runtech China RT120WM](https://comparepv.com/panel/runtech-china-rt120wm) | 120 W | +20 W, cooler, -1.1 pp | --- Source: https://comparepv.com/panel/wanze-energy-dlxn-m10-100w Not in this file, on the page: a thirty-year output simulator and alternatives filtered by how closely they match these dimensions.