--- title: "VSUN VSUN460N-120BMH-DG-BB 460W Solar Panel - Specs & Review | ComparePV" description: "VSUN VSUN460N-120BMH-DG-BB 460W solar panel. Specs: 21.26% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/vsun-vsun460n-120bmh-dg-bb" updated: 2026-09-11 --- # VSUN VSUN460N-120BMH-DG-BB Middle of its segment, modest efficiency 1,089 panels in the segment TOPCon 450-500 W ## Identity - **Manufacturer:** VSUN - **Model:** VSUN460N-120BMH-DG-BB - **Series:** VSUN N-120BMH-DG-BB (TOPCon bifacial, double-glass, black frame) - **Rated power:** 460 W - **Cell technology:** TOPCon - **Bifacial:** yes ## How it compares Compared against segment TOPCon 450-500 W (1089 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 460 W | 465 W | Typical | | | Module efficiency | 21.26% | 22.52% | Weak - bottom 4% | 8,894 | | Power density | 212.6 | 225.2 | Weak - bottom 4% | 8,778 | | Temperature coefficient | -0.300 | -0.290 | Weak - bottom 20% | 6,093 | | Weight (kg) | 26.7 kg | 24.0 kg | Weak - bottom 5% | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 21.26% | 22.52% | Weak - bottom 4% | 8,894 | | Power density | 212.6 | 225.2 | Weak - bottom 4% | 8,778 | | Temperature coefficient | -0.300 | -0.290 | Weak - bottom 20% | 6,093 | | Weight per kWp | 58.0 | 52.2 | Weak - bottom 5% | 11,546 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **21.26% module efficiency** - Bottom 4% of the TOPCon 450-500 W segment, against a median of 22.52%. Ranked 8,894th in the whole database. - **212.6 watts per square metre** - Bottom 4% of the TOPCon 450-500 W segment, against a median of 225.2. Ranked 8,778th in the whole database. - **58.0 kg per kWp** - Bottom 5% of the TOPCon 450-500 W segment, against a median of 52.2. Ranked 11,546th in the whole database. - **Best for:** Residential and commercial. - **Not ideal for:** Tight roof space, roofs where every square metre has to count and weight-limited structures. ## Specification ### Electrical - **Rated power (Pmax):** 460 W - **Efficiency:** 21.26 % - **Voltage at Pmax (Vmp):** 34.76 V - **Current at Pmax (Imp):** 13.24 A - **Open-circuit voltage (Voc):** 42.07 V - **Short-circuit current (Isc):** 13.99 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.300 %/degC - **Temperature coefficient of Voc:** -0.260 %/degC - **Temperature coefficient of Isc:** 0.046 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** TOPCon - **Cell count:** 120 - **Bifacial:** yes ### Physical - **Length:** 1908 mm - **Width:** 1134 mm - **Thickness:** 30 mm - **Weight:** 26.7 kg - **Area:** 2.16 m2 - **Power density:** 212.6 Wp/m2 ### Warranty and degradation - **Product warranty:** 25 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 402 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 8894 of 14005 | | Power density | 8778 of 14005 | | Temperature coefficient | 6093 of 14005 | | Weight | 11546 of 14005 | | Warranty | 21 of 14005 | ## About this series The VSUN N-120BMH-DG-BB series are **N-type TOPCon** modules with a **bifacial** design, specifically engineered to maximize energy yield not only from the front, but also from reflected light off the ground. This means improved performance in locations with bright roofs, gravel, concrete, snow, or carport structures - where traditional panels "lose" potential from the surrounding environment. The use of **double-glass** improves weather resistance and long-term stability, which is important for installations designed for long-term operation and predictable results. The TOPCon technology supports low degradation and more stable performance in varying temperatures, allowing the modules to better protect yield in hot weather and under less sunlight. The entire system is complemented by a **black frame**, which is a good choice when a consistent look is desired on modern roofs. This series is suitable for homes, commercial buildings, and premium projects where the balance of aesthetics, durability, and bifacial gain is key. ## Notable figures - Module efficiency of 21.3% is 1.3pp below average for \*\*TOPCon 450-500W\*\* panels (median: 22.5%) - Power density of 212.6 W/m² is 12.6 W/m² below \*\*TOPCon 450-500W\*\* median (225.2 W/m²) - needs more roof space - At -0.30%/°C, hot weather performance is typical for \*\*TOPCon 450-500W\*\* panels - Weight of 26.7 kg is 2.7 kg above \*\*TOPCon 450-500W\*\* median (24.0 kg) - verify structural support - Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface ## Questions ### What does TOPCon and bifacial mean for the VSUN N-120BMH-DG-BB panel, and is it worth it? TOPCon is an N-type cell technology offering lower degradation and better high-temperature performance than standard PERC. Bifacial design lets the panel generate power from the rear side using light reflected off the ground. In the VSUN N-120BMH-DG-BB these traits complement each other - the bifacial gain typically adds several to over ten percent extra yield, especially on bright roofs, gravel, or carport structures, shortening the payback period. ### What is the maximum power and efficiency of the VSUN N-120BMH-DG-BB module? The top variant in this series reaches 475 Wp at roughly 21.95% efficiency, thanks to 120 half-cut N-type TOPCon cells. Dimensions are about 1908x1134x30 mm and weight is around 26.7 kg - this needs to be factored into the mounting structure design, since the glass-glass build is heavier than standard backsheet panels. ### Are VSUN N-120BMH-DG-BB panels a good fit for bright roofing or ground-mount installations? Yes, this is one of the series' main strengths. The bifacial design makes best use of high-albedo surroundings - a bright roof, gravel, concrete, or winter snow all increase the amount of reflected light reaching the rear side of the module. Ground-mount racking and carports, where the panel has open clearance underneath, allow the bifacial gain to be fully realized. ### What is the product and power warranty for the VSUN N-120BMH-DG-BB series? The manufacturer provides a 25-year product warranty and a 30-year linear power warranty, guaranteeing at least 87.4% of rated power at the end of that period. First-year degradation is capped at 0.4%, with roughly 1% cumulative degradation per subsequent year - a standard consistent with modern TOPCon modules and a solid safeguard for a long-term investment. ### Does the VSUN N-120BMH-DG-BB perform well on hot days? Yes, thanks to TOPCon technology the temperature coefficient of power is only around -0.3%/°C, lower than typical PERC panels (usually -0.35% to -0.40%/°C). In practice this means a smaller output drop on hot summer days, when panel temperature on a roof can exceed 50-60°C, which matters for installations on poorly ventilated roof surfaces. ### Is VSUN a Tier 1 manufacturer, and does that matter when choosing panels? VSUN does not currently appear on the BNEF Tier 1 list, despite having a European headquarters. This doesn't imply lower technical quality - the Tier 1 classification mainly reflects financial stability and production scale rather than the panel's own specifications. It's still worth checking warranty service terms and local technical support availability from your distributor, rather than basing the decision on this label alone. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/661e0dbd59bae-28ad29c99400.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | +50 W, cooler, +3.7 pp | | [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | Cooler, lighter, +3.5 pp | | [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | +45 W, cooler, +3.4 pp | | [AIKO AIKO-A490-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a490-mce54mw) | 490 W | Cooler, lighter, +3.2 pp | | [Longi Solar LR7-54HJD-500M](https://comparepv.com/panel/longi-lr7-54hjd-500m) | 500 W | +40 W, cooler, +3.2 pp | | [Talesun CIPRO-TN9C54M-500W](https://comparepv.com/panel/talesun-cipro-tn9c54m-500w) | 500 W | +40 W, lighter, +3.2 pp | | [VSUN VSUN455N-120MH](https://comparepv.com/panel/vsun-vsun455n-120mh) | 455 W | Lighter, -0.2 pp | | [VSUN VSUN465N-120BMH-DG-BB](https://comparepv.com/panel/vsun-vsun465n-120bmh-dg-bb) | 465 W | +0.2 pp | | [VSUN VSUN470N-120MH-BB](https://comparepv.com/panel/vsun-vsun470n-120mh-bb) | 470 W | +10 W, lighter, +0.5 pp | | [Longi Solar LR7-60HVH-560M](https://comparepv.com/panel/longi-lr7-60hvh-560m) | 560 W | +100 W, cooler, +3.5 pp | | [Longi Solar LR7-60HVH-555M](https://comparepv.com/panel/longi-lr7-60hvh-555m) | 555 W | +95 W, cooler, +3.3 pp | | [Longi Solar LR7-60HVHL-550M](https://comparepv.com/panel/longi-lr7-60hvhl-550m) | 550 W | +90 W, lighter, +3.1 pp | | [JA Solar JAT60S40-540/LR](https://comparepv.com/panel/ja-solar-jat60s40-540-lr) | 540 W | +80 W, cooler, +3.1 pp | | [Gokin GK-5-60HG-540M](https://comparepv.com/panel/gokin-gk-5-60hg-540m) | 540 W | +80 W, cooler, +3.1 pp | | [Jinko Solar JKM545-54QL6-DV-F1-EU](https://comparepv.com/panel/jinko-solar-jkm545-54ql6-dv-f1-eu) | 545 W | +85 W, cooler, +3.0 pp | | [Longi Solar LR7-60HVH-545M](https://comparepv.com/panel/longi-lr7-60hvh-545m) | 545 W | +85 W, cooler, +2.9 pp | --- Source: https://comparepv.com/panel/vsun-vsun460n-120bmh-dg-bb Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.