--- title: "Vikram Solar HYPERSOL VSMDH.72.AAA.05 605W Solar Panel: Specs & Datasheet | ComparePV" description: "Vikram Solar HYPERSOL VSMDH.72.AAA.05 605W solar panel. Specs: 23.42% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/vikram-solar-hypersol-vsmdh-72-aaa-05" image: "https://comparepv.com/og/panel/vikram-solar-hypersol-vsmdh-72-aaa-05.png" updated: 2026-09-11 --- # Vikram Solar HYPERSOL VSMDH.72.AAA.05 Efficiency leader, weak in heat 368 panels in the segment N-type 600-650 W ## Identity - **Manufacturer:** Vikram Solar - **Model:** HYPERSOL VSMDH.72.AAA.05 - **Series:** HYPERSOL VSMDH.72.AAA.05 - **Rated power:** 605 W - **Cell technology:** N-type - **Bifacial:** yes ## How it compares Compared against segment N-type 600-650 W (368 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 605 W | 625 W | Weak - bottom 10% | | | Module efficiency | 23.42% | 22.77% | Strong - top 14% | 902 | | Power density | 234.2 | 227.7 | Strong - top 15% | 900 | | Temperature coefficient | -0.300 | -0.290 | Weak - bottom 11% | 6,152 | | Weight (kg) | 31.6 kg | 32.8 kg | Typical | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 23.42% | 22.77% | Strong - top 14% | 902 | | Power density | 234.2 | 227.7 | Strong - top 15% | 900 | | Temperature coefficient | -0.300 | -0.290 | Weak - bottom 11% | 6,152 | | Weight per kWp | 52.2 | 52.8 | Typical | 5,746 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Strengths - **23.42% module efficiency** - Top 14% of the N-type 600-650 W segment, against a median of 22.77%. - **234.2 watts per square metre** - Top 15% of the N-type 600-650 W segment, against a median of 227.7. ### Watch out for - **-0.300 %/°C temperature coefficient** - Bottom 11% of the N-type 600-650 W segment, against a median of -0.290. - **Best for:** Utility-scale, commercial and shaded-installations. - **Not ideal for:** Hot climates. ## Specification ### Electrical - **Rated power (Pmax):** 605 W - **Efficiency:** 23.42 % - **Voltage at Pmax (Vmp):** 43.80 V - **Current at Pmax (Imp):** 13.83 A - **Open-circuit voltage (Voc):** 51.90 V - **Short-circuit current (Isc):** 14.50 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.300 %/degC - **Temperature coefficient of Voc:** -0.260 %/degC - **Temperature coefficient of Isc:** 0.046 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** N-type - **Cell count:** 144 - **Bifacial:** yes ### Physical - **Length:** 2278 mm - **Width:** 1134 mm - **Thickness:** 30 mm - **Weight:** 31.6 kg - **Area:** 2.58 m2 - **Power density:** 234.2 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 529 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 902 of 14129 | | Power density | 900 of 14129 | | Temperature coefficient | 6152 of 14129 | | Weight | 5746 of 14129 | | Warranty | 21 of 14129 | ## About this series The HYPERSOL VSMDH.72.AAA.05 series from Vikram Solar was designed for commercial installations and utility-scale PV plants, where every watt of generated energy counts. The panels use **N-Type half-cut cells**, which translates into higher energy conversion efficiency and better performance under partial shading and low irradiance conditions. The **glass-glass bifacial** construction allows for additional energy harvest from light reflected off the ground, increasing the total energy yield of the installation without enlarging the roof or ground footprint. The series stands out for its **low power degradation over time**, thanks to high resistance to PID, LID, and LeTID effects, resulting in stable energy production throughout the entire service life. An additional advantage is **zero negative power tolerance**, which reduces the risk of losses caused by module mismatch within series strings. The manufacturer backs the series with a **30-year performance warranty**, giving investors confidence in the long-term return on their investment. Thanks to a low temperature coefficient, the panels maintain high efficiency even on hot days, making them a solid choice for installers looking to reduce BoS costs and lower the project's LCOE. ## Notable figures - Efficiency of 23.4% is 0.7pp above the \*\*N-type 600-650W\*\* median (22.8%) - Power density of 234.2 W/m² packs 6.5 W/m² more into the same footprint vs \*\*N-type 600-650W\*\* median (227.7 W/m²) - Temperature coefficient of -0.30%/°C matches the \*\*N-type 600-650W\*\* median - At 31.6 kg, this panel is 1.2 kg lighter than \*\*N-type 600-650W\*\* median (32.8 kg) - easier handling during installation - 75% bifaciality enables rear-side power generation, boosting yield by 4-11% on reflective surfaces ## Questions ### What is the maximum power output of the Vikram Solar HYPERSOL VSMDH.72.AAA.05 panel? The most powerful variant in the HYPERSOL VSMDH.72.AAA.05 series reaches 605 Wp, with module efficiency of around 23.4%. The panel uses 144 N-type half-cut cells, delivering high energy yield per unit of surface area. This makes it a strong choice for utility-scale PV farms and large commercial installations where maximizing installed power on limited roof or ground space is critical. ### How does bifacial technology in Vikram Solar HYPERSOL panels differ from standard single-sided modules? The HYPERSOL VSMDH.72.AAA.05 modules use a glass-glass construction, so the rear side also generates energy from light reflected off the ground. Depending on the surface albedo (white gravel, light-colored roofing, snow), the additional yield can range from a few to over ten percent. This is especially cost-effective for ground-mount installations on tall racking and for flat roofs with highly reflective, light-colored surfaces. ### What warranty applies to Vikram Solar HYPERSOL VSMDH.72.AAA.05 panels? The manufacturer provides a 12-year product warranty covering material and workmanship defects, plus a 30-year linear performance warranty. Thanks to low annual degradation and zero negative power tolerance, investors can be confident the module will still deliver a significant share of its rated output after decades of operation, directly supporting project profitability over a 25-30 year horizon. ### Are Vikram Solar HYPERSOL panels suitable for a large utility-scale PV farm? Yes, the VSMDH.72.AAA.05 series is designed for utility-scale and commercial installations, where high unit power and low BoS cost per watt installed are essential. Strong resistance to PID, LID, and LeTID ensures stable energy production across large series strings, while a low temperature coefficient limits power losses on hot days, helping reduce the project's LCOE. ### Is Vikram Solar a Tier 1 manufacturer, and where are HYPERSOL panels made? Yes, Vikram Solar is a Tier 1 manufacturer headquartered in India, listed among reputable PV module suppliers with proven financial stability and bankability. This status matters for financing large-scale PV projects, since banks and investment funds are more willing to lend for installations using panels from established Tier 1 manufacturers. ### How do N-type half-cut cells in HYPERSOL panels perform under low light conditions? N-type cells degrade less over time and respond better to low irradiance than standard P-type cells, so the panel generates more energy in the morning, evening, and on overcast days. Splitting cells into halves (half-cut) reduces resistive losses and limits the impact of partial shading on the module, improving overall system productivity under real-world operating conditions. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/HYPERSOL-M10R-580-605W-144-CELLS-3-bb174eab5669.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [AIKO AIKO-A650-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a650-mae72mw) | 650 W | +45 W, lighter, +1.8 pp | | [AIKO AIKO-A645-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a645-mae72mw) | 645 W | +40 W, lighter, +1.6 pp | | [Longi Solar LR7-60HVH-560M](https://comparepv.com/panel/longi-lr7-60hvh-560m) | 560 W | -45 W, lighter, +1.4 pp | | [AIKO AIKO-A640-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a640-mae72mw) | 640 W | Cooler, lighter, +1.4 pp | | [Longi Solar LR7-60HVH-555M](https://comparepv.com/panel/longi-lr7-60hvh-555m) | 555 W | -50 W, lighter, +1.2 pp | | [AIKO AIKO-A635-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a635-mae72mw) | 635 W | Cooler, lighter, +1.2 pp | | [Vikram Solar PREXOS VSMDHT.72.535.05](https://comparepv.com/panel/vikram-solar-prexos-vsmdht-72-535-05) | 535 W | -70 W, hotter, -2.7 pp | | [Vikram Solar PARADEA VSMDH.72.AAA.05-540](https://comparepv.com/panel/vikram-solar-paradea-vsmdh-72-aaa-05-540) | 540 W | -65 W, hotter, -2.5 pp | | [Vikram Solar PREXOS VSMDHT.72.540.05](https://comparepv.com/panel/vikram-solar-prexos-vsmdht-72-540-05) | 540 W | -65 W, hotter, -2.5 pp | | [Vikram Solar PARADEA VSMDH.72.AAA.05-545](https://comparepv.com/panel/vikram-solar-paradea-vsmdh-72-aaa-05-545) | 545 W | -60 W, hotter, -2.3 pp | | [Vikram Solar PREXOS VSMDHT.72.545.05](https://comparepv.com/panel/vikram-solar-prexos-vsmdht-72-545-05) | 545 W | -60 W, hotter, -2.3 pp | | [AIKO AIKO-A630-MAH72Dw](https://comparepv.com/panel/aiko-aiko-a630-mah72dw) | 630 W | +25 W, cooler, +1.0 pp | --- Source: https://comparepv.com/panel/vikram-solar-hypersol-vsmdh-72-aaa-05 Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.