--- title: "Vikram Solar HYPERSOL VSMDH.66.AAA.05-715 715W Solar Panel - Specs & Review | ComparePV" description: "Vikram Solar HYPERSOL VSMDH.66.AAA.05-715 715W solar panel. Specs: 23.02% efficiency, Monocrystalline cells." source: "https://comparepv.com/panel/vikram-solar-hypersol-vsmdh-66-aaa-05-715" updated: 2026-09-11 --- # Vikram Solar HYPERSOL VSMDH.66.AAA.05-715 Strong in heat, heavy for its output 90 panels in the segment N-type 700-750 W ## Identity - **Manufacturer:** Vikram Solar - **Model:** HYPERSOL VSMDH.66.AAA.05-715 - **Series:** HYPERSOL VSMDH.66.AAA.05 - **Rated power:** 715 W - **Cell technology:** N-type - **Bifacial:** yes ## How it compares Compared against segment N-type 700-750 W (90 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 715 W | 710 W | Typical | | | Module efficiency | 23.02% | 22.88% | Typical | 1,797 | | Power density | 230.2 | 228.6 | Typical | 2,018 | | Temperature coefficient | -0.280 | -0.290 | Strong - top 19% | 1,309 | | Weight (kg) | 39.5 kg | 38.0 kg | Weak - bottom 9% | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 23.02% | 22.88% | Typical | 1,797 | | Power density | 230.2 | 228.6 | Typical | 2,018 | | Temperature coefficient | -0.280 | -0.290 | Strong - top 19% | 1,309 | | Weight per kWp | 55.2 | 53.5 | Weak - bottom 9% | 9,680 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Strengths - **-0.280 %/°C temperature coefficient** - Top 19% of the N-type 700-750 W segment, against a median of -0.290. ### Watch out for - **55.2 kg per kWp** - Bottom 9% of the N-type 700-750 W segment, against a median of 53.5. Ranked 9,680th in the whole database. - **Best for:** Utility-scale, commercial and agrivoltaic. - **Not ideal for:** Weight-limited structures. ## Specification ### Electrical - **Rated power (Pmax):** 715 W - **Efficiency:** 23.02 % - **Voltage at Pmax (Vmp):** 41.00 V - **Current at Pmax (Imp):** 17.45 A - **Open-circuit voltage (Voc):** 49.20 V - **Short-circuit current (Isc):** 18.48 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.280 %/degC - **Temperature coefficient of Voc:** -0.260 %/degC - **Temperature coefficient of Isc:** 0.046 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** N-type - **Cell count:** 132 - **Bifacial:** yes ### Physical - **Length:** 2384 mm - **Width:** 1303 mm - **Thickness:** 35 mm - **Weight:** 39.5 kg - **Area:** 3.11 m2 - **Power density:** 230.2 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 625 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 1797 of 14005 | | Power density | 2018 of 14005 | | Temperature coefficient | 1309 of 14005 | | Weight | 9680 of 14005 | | Warranty | 21 of 14005 | ## About this series The **Vikram Solar HYPERSOL VSMDH.66.AAA.05** series consists of bifacial glass-glass solar modules built for installers and investors who want the highest possible yield from every square meter of roof or ground space. Thanks to **half-cut N-type G12 cells**, these panels reduce current-mismatch losses across the string, resulting in more stable performance for the entire array. What sets this series apart is its **bifaciality of up to 80 percent**, allowing it to capture additional energy reflected from the ground, which is especially valuable in ground-mount installations and light-colored surfaces. The manufacturer also implemented a **zero negative power tolerance**, so the actual output of installed panels never falls below the stated nominal value. A design resistant to PID, LID, and LeTID degradation ensures better durability under demanding operating conditions, while an independently verified hail test confirms the strong mechanical resistance of the front glass. Backed by a **30-year linear power warranty**, this series is an attractive choice for both commercial rooftop projects and large utility-scale solar farms, where a low LCOE and predictable long-term performance matter most. ## Notable figures - At 23.0% efficiency, this panel is on par with typical \*\*N-type 700-750W\*\* modules - Power density of 230.2 W/m² matches the \*\*N-type 700-750W\*\* median - At -0.28%/°C, hot weather performance is typical for \*\*N-type 700-750W\*\* panels - Weight of 39.5 kg is 1.5 kg above \*\*N-type 700-750W\*\* median (38.0 kg) - verify structural support - Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof ## Questions ### What is the warranty on Vikram Solar HYPERSOL VSMDH.66.AAA.05 modules? The series comes with a standard 12-year product warranty and a 30-year linear power warranty, guaranteeing high energy output even after three decades of operation. This is one of the longer warranty periods on the market, making the model an attractive choice for commercial installations and PV farms where predictable long-term ROI matters. ### What benefit does the up to 80% bifaciality of the HYPERSOL VSMDH.66.AAA.05 panels provide? Thanks to the glass-glass construction and a bifaciality factor of up to 80%, the rear side of the module captures additional light reflected from the ground, roof, or surroundings. In ground-mount installations, on light gravel, white roofs, or agri-PV farms, this can boost energy yield by several percent compared to monofacial panels, without increasing the installed footprint. ### How do N-type half-cut G12 cells differ from classic PERC cells? N-type cells have lower light-induced degradation (LID) and light- and elevated temperature-induced degradation (LeTID), plus higher efficiency than older P-type PERC cells. The half-cut format in the G12 size splits each cell in half, reducing current losses and internal resistance, improving module performance under partial shading, and boosting total panel power up to 720 Wp. ### Are the HYPERSOL VSMDH.66.AAA.05 panels suitable for large solar farms? Yes, the high unit power of 720 Wp combined with bifaciality and resistance to PID, LID, and LeTID make this series designed for large ground-mount and commercial installations where a low levelized cost of energy (LCOE) per watt matters. Fewer modules are needed to reach a given capacity, lowering mounting structure, cabling, and installation labor costs. ### What does zero negative power tolerance mean for these panels? Zero negative power tolerance means the actual output of every manufactured panel is never lower than the value stated on the label — it can only be equal to or slightly higher. For investors, this guarantees that the purchased system capacity will be fully delivered, removing the risk of underestimated energy production from day one. ### Is Vikram Solar a proven manufacturer, and where are HYPERSOL panels made? Vikram Solar is an Indian PV module manufacturer with Tier 1 classification, confirming its financial stability and production track record as recognized by market analysts such as BloombergNEF. HYPERSOL VSMDH.66.AAA.05 panels are manufactured in India, and their PID-, LID-, and LeTID-resistant construction along with a passed independent hail impact test confirm solid build quality. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/HYPERSOL-G12-695-720W-132-CELLS-d16a6f45a332.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [AIKO AIKO-A680-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a680-mde72mw) | 680 W | -35 W, lighter, +2.2 pp | | [AIKO AIKO-A675-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a675-mde72mw) | 675 W | -40 W, lighter, +2.0 pp | | [AIKO AIKO-A700-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a700-mae78dw) | 700 W | Cooler, lighter, +2.0 pp | | [AIKO AIKO-A695-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a695-mae78dw) | 695 W | Cooler, lighter, +1.9 pp | | [AIKO AIKO-G670-MCH72Mw](https://comparepv.com/panel/aiko-aiko-g670-mch72mw) | 670 W | -45 W, lighter, +1.8 pp | | [Longi Solar LR7-72HVHF-670M](https://comparepv.com/panel/longi-lr7-72hvhf-670m) | 670 W | -45 W, lighter, +1.8 pp | | [Jinko Solar JKM650-670N-66QL6-BDV (670W class)](https://comparepv.com/panel/jinko-solar-jkm650-670n-66ql6-bdv-670w-class) | 670 W | -45 W, lighter, +1.8 pp | | [Vikram Solar PARADEA VSMDH.66.AAA.05-655](https://comparepv.com/panel/vikram-solar-paradea-vsmdh-66-aaa-05-655) | 655 W | -60 W, hotter, -1.9 pp | | [Vikram Solar PARADEA VSMDH.66.AAA.05-660](https://comparepv.com/panel/vikram-solar-paradea-vsmdh-66-aaa-05-660) | 660 W | -55 W, hotter, -1.8 pp | | [Vikram Solar PARADEA VSMDH.66.AAA.05-665](https://comparepv.com/panel/vikram-solar-paradea-vsmdh-66-aaa-05-665) | 665 W | -50 W, hotter, -1.6 pp | | [AIKO AIKO-A805-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a805-grh78dw) | 805 W | +90 W, cooler, +2.1 pp | | [AIKO AIKO-A800-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a800-grh78dw) | 800 W | +85 W, cooler, +1.9 pp | | [AIKO AIKO-A795-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a795-grh78dw) | 795 W | +80 W, cooler, +1.8 pp | | [AIKO AIKO-A790-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a790-grh78dw) | 790 W | +75 W, cooler, +1.6 pp | | [Trina Solar TSM-NEG21C.20Q-760](https://comparepv.com/panel/trina-solar-tsm-neg21c-20q-760) | 760 W | +45 W, cooler, +1.5 pp | | [AIKO AIKO-A785-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a785-grh78dw) | 785 W | +70 W, cooler, +1.4 pp | --- Source: https://comparepv.com/panel/vikram-solar-hypersol-vsmdh-66-aaa-05-715 Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.