--- title: "Trina Solar TSM-460 NEG9R.28 460W Solar Panel - Specs & Review | ComparePV" description: "Trina Solar TSM-460 NEG9R.28 460W solar panel. Specs: 23.00% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/trina-solar-tsm-460-neg9r-28" updated: 2026-09-11 --- # Trina Solar TSM-460 NEG9R.28 Light for its output, no clear weak spot 1,089 panels in the segment TOPCon 450-500 W ## Identity - **Manufacturer:** Trina Solar - **Model:** TSM-460 NEG9R.28 - **Series:** Vertex S+ - **Rated power:** 460 W - **Cell technology:** TOPCon - **Bifacial:** yes ## How it compares Compared against segment TOPCon 450-500 W (1089 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 460 W | 465 W | Typical | | | Module efficiency | 23.00% | 22.52% | Strong - top 22% | 1,919 | | Power density | 230.2 | 225.2 | Strong - top 20% | 1,876 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,165 | | Weight (kg) | 21.0 kg | 24.0 kg | Strong - top 11% | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 23.00% | 22.52% | Strong - top 22% | 1,919 | | Power density | 230.2 | 225.2 | Strong - top 20% | 1,876 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,165 | | Weight per kWp | 45.7 | 52.2 | Strong - top 11% | 805 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Strengths - **45.7 kg per kWp** - Top 11% of the TOPCon 450-500 W segment, against a median of 52.2. - **230.2 watts per square metre** - Top 20% of the TOPCon 450-500 W segment, against a median of 225.2. - **23.00% module efficiency** - Top 22% of the TOPCon 450-500 W segment, against a median of 22.52%. - **Best for:** Residential, commercial, shaded-installations and hot-climate. ## Specification ### Electrical - **Rated power (Pmax):** 460 W - **Efficiency:** 23.00 % - **Voltage at Pmax (Vmp):** 45.40 V - **Current at Pmax (Imp):** 10.14 A - **Open-circuit voltage (Voc):** 53.80 V - **Short-circuit current (Isc):** 10.81 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.290 %/degC - **Temperature coefficient of Voc:** -0.240 %/degC - **Temperature coefficient of Isc:** 0.040 %/degC - **NOCT:** 43 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** TOPCon - **Cell count:** 144 - **Bifacial:** yes ### Physical - **Length:** 1762 mm - **Width:** 1134 mm - **Thickness:** 30 mm - **Weight:** 21.0 kg - **Area:** 2.00 m2 - **Power density:** 230.2 Wp/m2 ### Warranty and degradation - **Product warranty:** 25 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 402 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 1919 of 14005 | | Power density | 1876 of 14005 | | Temperature coefficient | 2165 of 14005 | | Weight | 805 of 14005 | | Warranty | 21 of 14005 | ## About this series The Trina Solar Vertex S+ series are modules designed for rooftops, where yield, durability, and aesthetics are key factors. The key differentiator is the combination of **n-type i-TOPCon cell technology** with the **dual-glass construction**, which uses a second glass sheet instead of a traditional backsheet. This provides better protection against moisture and material aging, performing exceptionally well in more demanding environmental conditions. In practice, this means more stable performance over time and lower risk of degradation compared to older solutions. The Vertex S+ addresses a common challenge for investors: achieving high yield from limited rooftop space without compromising on appearance. Available variants (including the version with enhanced black finish) offer **modern, cohesive aesthetics** for premium homes, while simultaneously maintaining installer-friendly parameters - **compatibility with popular inverters and optimizers**, along with a format that simplifies installation. This is an excellent choice for residential and small commercial installations where long-term quality and predictable energy yield are essential. ## Notable figures - Efficiency of 23.0% matches the \*\*TOPCon 450-500W\*\* median - 230.2 W/m² power density - 5.0 W/m² more than \*\*TOPCon 450-500W\*\* median (225.2 W/m²), more power per roof area - Temperature coefficient of -0.29%/°C matches the \*\*TOPCon 450-500W\*\* median - At 21.0 kg, this panel is 3.0 kg lighter than \*\*TOPCon 450-500W\*\* median (24.0 kg) - easier handling during installation - #1919 for efficiency, #2165 for temperature performance out of 14005 panels ## Questions ### What is n-type i-TOPCon cell technology in Trina Solar Vertex S+ panels and how does it differ from standard p-type cells? i-TOPCon is an n-type cell technology that reduces light-induced degradation (LID) and temperature-related losses compared to more common p-type cells. In practice this means higher initial efficiency, a slower power decline over time, and better performance on hot rooftops in summer. For homeowners, this translates into higher real-world energy yield across the panel's 30-year service life. ### How many Trina Solar Vertex S+ 510 Wp panels are needed for a 6 kW residential system? With a unit power of 510 Wp, a roughly 6 kW system requires about 11-12 panels, covering approximately 22-24 m² of roof space. That's a real space saving compared to older, less efficient modules, where the same output often required several extra panels. The exact number depends on roof pitch, orientation, and local solar irradiance. ### What warranty comes with Trina Solar Vertex S+ panels and what does it cover? The manufacturer provides a 25-year product warranty covering material and workmanship defects, plus a 30-year linear power output warranty. This means that even after 30 years, the module should still deliver a guaranteed, high percentage of its original power. As a Tier 1 manufacturer with a long track record, Trina Solar adds extra confidence that these warranty claims will actually be honored. ### How does the dual-glass construction in Vertex S+ differ from a standard backsheet panel, and is it worth the cost? Instead of a polymer backsheet, the panel uses a second glass layer on the back side, offering better protection against moisture, microcracks, and material aging, especially in harsher climates. Purchase cost is only slightly higher than a backsheet version, but it translates into greater durability and lower failure risk over decades of operation, supporting the 30-year power warranty. ### Are Trina Solar Vertex S+ panels bifacial, generating extra energy from the rear side? No, this Vertex S+ configuration is a monofacial module despite its dual-glass construction. The second glass layer serves a protective function rather than capturing reflected light for extra generation. This is a deliberate design choice by the manufacturer, balancing aesthetics and universal compatibility with sloped roof installations, where bifacial gains would be minimal anyway. ### Is Trina Solar a reliable, trustworthy manufacturer for residential solar panels? Yes, Trina Solar is a China-based manufacturer classified as Tier 1, meaning it has a solid financial standing, in-house production lines, and a long track record of module deliveries worldwide. This status matters practically when filing warranty claims years later - Tier 1 status lowers the risk that the manufacturer disappears from the market and leaves the warranty unenforceable. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/Datasheet_Vertex_S_NEG9R28_EN_2024_C_web-7de48f181210.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | +50 W, cooler, +2.0 pp | | [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | +35 W, cooler, +1.8 pp | | [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | +45 W, cooler, +1.7 pp | | [AIKO AIKO-A490-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a490-mce54mw) | 490 W | +30 W, cooler, +1.5 pp | | [Longi Solar LR7-54HJD-500M](https://comparepv.com/panel/longi-lr7-54hjd-500m) | 500 W | +40 W, cooler, +1.5 pp | | [Talesun CIPRO-TN9C54M-500W](https://comparepv.com/panel/talesun-cipro-tn9c54m-500w) | 500 W | +40 W, cooler, +1.5 pp | | [Trina Solar TSM-DE09R.05-405](https://comparepv.com/panel/trina-solar-tsm-de09r-05-405) | 405 W | -55 W, hotter, -2.7 pp | | [Trina Solar TSM-DE09R.05-410](https://comparepv.com/panel/trina-solar-tsm-de09r-05-410) | 410 W | -50 W, hotter, -2.5 pp | | [Trina Solar TSM-DE09R-415](https://comparepv.com/panel/trina-solar-tsm-de09r-415) | 415 W | Hotter, -2.2 pp, -5 yr warranty | | [Trina Solar TSM-DE09R.08-420](https://comparepv.com/panel/trina-solar-tsm-de09r-08-420) | 420 W | Hotter, -2.0 pp, -5 yr warranty | --- Source: https://comparepv.com/panel/trina-solar-tsm-460-neg9r-28 Not in this file, on the page: a thirty-year output simulator and alternatives filtered by how closely they match these dimensions.