--- title: "SunLink LNSE-295P 295W Solar Panel - Specs & Review | ComparePV" description: "SunLink LNSE-295P 295W solar panel. Specs: 17.76% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/sunlink-lnse-295p" updated: 2026-09-11 --- # SunLink LNSE-295P Space saver, no clear weak spot 74 panels in the segment PERC 250-300 W ## Identity - **Manufacturer:** SunLink - **Model:** LNSE-295P - **Series:** LUXMAX - **Rated power:** 295 W - **Cell technology:** PERC ## How it compares Compared against segment PERC 250-300 W (74 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 295 W | 275 W | Strong - top 5% | | | Module efficiency | 17.76% | 17.21% | Strong - top 24% | 13,290 | | Power density | 177.6 | 172.1 | Strong - top 20% | 13,273 | | Temperature coefficient | -0.360 | -0.370 | Strong - top 23% | 12,345 | | Weight (kg) | 19.5 kg | 18.5 kg | Typical | | | Performance warranty | 25 yrs | 25 yrs | Typical | 9,798 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 17.76% | 17.21% | Strong - top 24% | 13,290 | | Power density | 177.6 | 172.1 | Strong - top 20% | 13,273 | | Temperature coefficient | -0.360 | -0.370 | Strong - top 23% | 12,345 | | Weight per kWp | 66.1 | 66.5 | Typical | 13,139 | | Performance warranty | 25 yrs | 25 yrs | Typical | 9,798 | ### Strengths - **177.6 watts per square metre** - Top 20% of the PERC 250-300 W segment, against a median of 172.1. - **-0.360 %/°C temperature coefficient** - Top 23% of the PERC 250-300 W segment, against a median of -0.370. - **17.76% module efficiency** - Top 24% of the PERC 250-300 W segment, against a median of 17.21%. - **Best for:** Roofs where every square metre counts, hot roofs and southern climates and small roofs that need every watt. ## Specification ### Electrical - **Rated power (Pmax):** 295 W - **Efficiency:** 17.76 % - **Voltage at Pmax (Vmp):** 31.90 V - **Current at Pmax (Imp):** 9.25 A - **Open-circuit voltage (Voc):** 39.41 V - **Short-circuit current (Isc):** 9.71 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.360 %/degC - **Temperature coefficient of Voc:** -0.290 %/degC - **Temperature coefficient of Isc:** 0.050 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** PERC - **Cell count:** 60 ### Physical - **Length:** 1658 mm - **Width:** 1002 mm - **Thickness:** 35 mm - **Weight:** 19.5 kg - **Area:** 1.66 m2 - **Power density:** 177.6 Wp/m2 ### Warranty and degradation - **Product warranty:** 10 years - **Performance warranty:** 25 years - **Output guaranteed at end of warranty:** 80.7 % - **First-year degradation:** 2.50 % - **Annual degradation:** 0.70 % - **Output after 30 years:** 228 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 13290 of 14005 | | Power density | 13273 of 14005 | | Temperature coefficient | 12345 of 14005 | | Weight | 13139 of 14005 | | Warranty | 9798 of 14005 | ## About this series The SunLink LUXMAX series utilizes innovative **N-type TopCon cell** technology, which provides significantly higher energy conversion efficiency even in low sunlight conditions, typical for the Polish climate zone. Thanks to the use of advanced **bifacial technology**, these panels effectively absorb light reflected from the ground, resulting in a real increase in energy yields for ground-mounted installations and light-colored roof coverings. This solution effectively eliminates the problem of rapid module degradation, offering exceptional **resistance to PID and LID phenomena**, which guarantees stable system operation and investment security for decades. This series is dedicated to demanding residential and commercial users with limited installation space who want to achieve maximum power from every square meter of the roof. Significantly, the modules are distinguished by a **low temperature coefficient**, thanks to which they maintain high efficiency even during hot summer days, which often poses a barrier for standard competitor cells. The use of a dense SMBB busbar grid improves current conduction and increases the mechanical strength of the structure against snow loads or strong winds. SunLink LUXMAX is the optimal choice for investors looking for a balance between modern technology and long-term reliability. ## Notable figures - At 17.8% efficiency, this panel is 1.7pp below the \*\*PERC 0-400W\*\* median of 19.4% - At 177.6 W/m², this panel generates 16.8 W/m² less per unit area than \*\*PERC 0-400W\*\* median (194.4 W/m²) - At -0.36%/°C, hot weather performance is typical for \*\*PERC 0-400W\*\* panels - Weight of 19.5 kg is typical for \*\*PERC 0-400W\*\* panels - #13290 for efficiency, #12345 for temperature performance out of 14005 panels ## Questions ### What warranty does the SunLink LUXMAX come with? The SunLink LUXMAX carries a 10-year product warranty covering manufacturing defects and a 25-year linear power output warranty. This means the manufacturer guarantees the modules will retain at least the minimum power level specified in the datasheet after 25 years of operation. Since SunLink is not a Bloomberg NEF Tier 1 manufacturer, buyers should confirm that their local distributor can handle warranty claims domestically before purchasing. ### What cell technology does the SunLink LUXMAX use, and what does it mean for my system? The LUXMAX series uses PERC (Passivated Emitter and Rear Cell) technology, which adds a reflective passivation layer on the rear side of each cell to boost efficiency beyond standard BSF cells. With a rated peak power of 335 Wp, the module sits in the mid-range segment and is a practical choice for both residential rooftop installations and smaller commercial projects under standard irradiance conditions. ### Is the SunLink LUXMAX a bifacial panel? Can I boost yield by installing it over a light-colored surface? No, the SunLink LUXMAX is a monofacial module — it does not feature bifacial cell technology. The rear surface does not capture reflected albedo light, so mounting it over a white membrane, concrete, or gravel surface will not increase energy yield compared to a standard roof installation. If bifacial gain is important for your project, consider a series that explicitly supports bifacial operation. ### Is the SunLink LUXMAX suitable for a pitched roof with limited available area? Yes, at 335 Wp per module the LUXMAX is designed to maximize output per square meter. A typical single-family home requiring 4–5 kWp needs approximately 12–15 modules. Before installation on a pitched roof, review the datasheet for certified snow and wind load ratings and make sure the racking system is rated for the wind and snow zones applicable to your location. ### Is SunLink a Tier 1 manufacturer, and does that affect financing options? SunLink does not appear on the Bloomberg NEF Tier 1 or BNEF PV Module Bankability rankings. For most residential prosumer installations this has no practical impact, but certain banks and leasing companies require Tier 1 modules when financing larger commercial projects. If you plan to use a loan, lease, or grant program, verify in advance whether non-Tier 1 modules are accepted under the specific scheme's terms. ### What is the approximate installed cost of a 5 kWp system using SunLink LUXMAX 335 Wp panels? A 5 kWp system requires approximately 15 LUXMAX modules at 335 Wp each. Total installed system cost — including modules, inverter, BoS components, cabling, and labor — typically ranges from roughly €4,200 to €6,500 in Central European markets as of 2025–2026, depending on roof type, region, and inverter brand. Get a detailed quote from a certified installer who can assess your actual energy consumption profile and local grid connection requirements. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/g1-series-60-cell-0d8c7670d2c3.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [JA Solar NS-300MH-72](https://comparepv.com/panel/ja-solar-ns-300mh-72) | 300 W | Cooler, lighter, +5.6 pp | | [PolyCrown Solar Tech NS-300MH-72](https://comparepv.com/panel/polycrown-solar-tech-ns-300mh-72) | 300 W | Cooler, lighter, +5.6 pp | | [Heckert Solar ZEUS 1.2 FullBlack 280W](https://comparepv.com/panel/heckert-solar-zeus-1-2-fullblack-280w) | 280 W | Cooler, lighter, +5.5 pp | | [JA Solar NS-330MH-80](https://comparepv.com/panel/ja-solar-ns-330mh-80) | 330 W | Cooler, lighter, +5.4 pp | | [PolyCrown Solar Tech NS-330MH-80](https://comparepv.com/panel/polycrown-solar-tech-ns-330mh-80) | 330 W | Cooler, lighter, +5.4 pp | | [Gamko New Energy GKA182M285W](https://comparepv.com/panel/gamko-new-energy-gka182m285w) | 285 W | Lighter, +5.2 pp, +5 yr warranty | | [Gamko New Energy GKA182M260W](https://comparepv.com/panel/gamko-new-energy-gka182m260w) | 260 W | Lighter, +5.2 pp, +5 yr warranty | | [Gamko New Energy GKA182M270W](https://comparepv.com/panel/gamko-new-energy-gka182m270w) | 270 W | Lighter, +5.2 pp, +5 yr warranty | | [Gamko New Energy GKA182M300W](https://comparepv.com/panel/gamko-new-energy-gka182m300w) | 300 W | Lighter, +5.2 pp, +5 yr warranty | | [SunLink LNSE-275P](https://comparepv.com/panel/sunlink-lnse-275p) | 275 W | -20 W, -1.2 pp | | [SunLink LNSE-280P](https://comparepv.com/panel/sunlink-lnse-280p) | 280 W | -15 W, -0.9 pp | | [SunLink LNSE-285P](https://comparepv.com/panel/sunlink-lnse-285p) | 285 W | -10 W, -0.6 pp | | [SunLink LNSE-290P](https://comparepv.com/panel/sunlink-lnse-290p) | 290 W | -0.3 pp | | [SunLink LNSE-315M](https://comparepv.com/panel/sunlink-lnse-315m) | 315 W | +20 W, +1.2 pp | | [SunLink LNSE-320M](https://comparepv.com/panel/sunlink-lnse-320m) | 320 W | +25 W, +1.5 pp | | [SunLink LNSE-325M](https://comparepv.com/panel/sunlink-lnse-325m) | 325 W | +30 W, +1.8 pp | | [Jetion JT440SYK(B)](https://comparepv.com/panel/jetion-jt440syk-b) | 440 W | +145 W, cooler, +5.1 pp | --- Source: https://comparepv.com/panel/sunlink-lnse-295p Not in this file, on the page: a thirty-year output simulator and alternatives filtered by how closely they match these dimensions.