--- title: "SunEvo Solar SE6R-48HBD-450W Solar Panel: Specs & Datasheet | ComparePV" description: "SunEvo Solar SE6R-48HBD-450W solar panel. Specs: 22.52% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/sunevo-solar-se6r-48hbd-450w" image: "https://comparepv.com/og/panel/sunevo-solar-se6r-48hbd-450w.png" updated: 2026-09-11 --- # SunEvo Solar SE6R-48HBD-450W Middle of its segment, heavy for its output 1,096 panels in the segment TOPCon 450-500 W ## Identity - **Manufacturer:** SunEvo Solar - **Model:** SE6R-48HBD-450W - **Series:** EVO 6R - **Rated power:** 450 W - **Cell technology:** TOPCon - **Bifacial:** yes ## How it compares Compared against segment TOPCon 450-500 W (1096 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 450 W | 465 W | Weak - bottom 9% | | | Module efficiency | 22.52% | 22.52% | Typical | 4,167 | | Power density | 225.2 | 225.2 | Typical | 4,284 | | Temperature coefficient | -0.300 | -0.290 | Weak - bottom 20% | 6,152 | | Weight (kg) | 25.0 kg | 24.0 kg | Weak - bottom 11% | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 22.52% | 22.52% | Typical | 4,167 | | Power density | 225.2 | 225.2 | Typical | 4,284 | | Temperature coefficient | -0.300 | -0.290 | Weak - bottom 20% | 6,152 | | Weight per kWp | 55.6 | 52.2 | Weak - bottom 11% | 9,992 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **55.6 kg per kWp** - Bottom 11% of the TOPCon 450-500 W segment, against a median of 52.2. - **-0.300 %/°C temperature coefficient** - Bottom 20% of the TOPCon 450-500 W segment, against a median of -0.290. - **Best for:** Residential, commercial and shaded-installations. - **Not ideal for:** Weight-limited structures and hot climates. ## Specification ### Electrical - **Rated power (Pmax):** 450 W - **Efficiency:** 22.52 % - **Voltage at Pmax (Vmp):** 29.78 V - **Current at Pmax (Imp):** 15.11 A - **Open-circuit voltage (Voc):** 35.88 V - **Short-circuit current (Isc):** 15.97 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.300 %/degC - **Temperature coefficient of Voc:** -0.250 %/degC - **Temperature coefficient of Isc:** 0.046 %/degC - **NOCT:** 41 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** TOPCon - **Cell count:** 96 - **Bifacial:** yes ### Physical - **Length:** 1762 mm - **Width:** 1134 mm - **Thickness:** 30 mm - **Weight:** 25.0 kg - **Area:** 2.00 m2 - **Power density:** 225.2 Wp/m2 ### Warranty and degradation - **Product warranty:** 25 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **Output after 30 years:** 393 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 4167 of 14129 | | Power density | 4284 of 14129 | | Temperature coefficient | 6152 of 14129 | | Weight | 9992 of 14129 | | Warranty | 21 of 14129 | ## About this series The SunEvo Solar EVO 6R series is designed around N-type cells in HJT or TOPCon technologies, as well as a rectangular wafer format, which facilitates achieving high power density without artificially "over-sizing" the module. This solution will be particularly appreciated by investors who prioritize maximizing energy yield from a limited roof or ground area, as well as stable operation in varying conditions. A key advantage of the EVO 6R is its **bifacial design with double glass**, which improves resistance to microcracks and degradation over time, and, under favorable conditions, allows for better utilization of reflected light. The use of **half-cut cells** helps to minimize losses and increases tolerance to partial shading, which is important on roofs with skylights, chimneys, or carport installations. In practice, the EVO 6R is a good choice for companies, PV farms, and demanding prosumers who expect **low degradation and a long linear warranty**, while also wanting to realistically reduce BOS (Balance of System) costs thanks to the optimized module format. ## Notable figures - At 22.5% efficiency, this panel is on par with typical \*\*TOPCon 450-500W\*\* modules - At 225.2 W/m² power density, roof space requirements are typical for \*\*TOPCon 450-500W\*\* panels - At -0.30%/°C, hot weather performance is typical for \*\*TOPCon 450-500W\*\* panels - Weight of 25.0 kg is typical for \*\*TOPCon 450-500W\*\* panels - Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof ## Questions ### What warranty does the SunEvo Solar EVO 6R series come with? The SunEvo Solar EVO 6R series includes a 25-year product warranty and a 30-year linear power output warranty. This means the module is guaranteed to retain a manufacturer-specified minimum percentage of its initial rated power after 30 years of operation. The 30-year power warranty is among the longest currently available on the market, ensuring predictable energy yield over the full system lifetime and reducing long-term investment risk. ### Do EVO 6R TOPCon panels outperform PERC modules on hot days? Yes. N-type TOPCon cells have a lower temperature coefficient than older PERC cells, which means they lose proportionally less power as module temperature rises. In practice, this translates to higher real-world output during summer months when cell temperature routinely exceeds 50-60°C. For typical Central European conditions, the annual generation advantage of TOPCon over PERC is usually in the range of a few percentage points. ### What does bifacial double-glass construction mean in the EVO 6R, and is it a real-world advantage? Bifacial construction means the module generates power from both the front and rear glass surface by capturing light reflected from the ground. Double glass replaces the traditional backsheet film, improving resistance to microcracks, moisture ingress, and PID degradation. On reflective surfaces such as concrete, light-colored roofing membrane, or gravel, actual energy yield can exceed the rated 455 Wp front-side output by several to over ten percent. ### Is the EVO 6R suitable for a roof with a dormer or chimney causing partial shading? Yes, the EVO 6R series handles partial shading well thanks to its half-cut cell layout. Splitting each cell into two independent halves limits the impact of shadow on the overall string output. The same advantage applies to carport installations with lateral obstructions. For persistent or extensive shading patterns, adding power optimizers or microinverters is still recommended to maximize harvest. ### Is SunEvo Solar a Tier 1 manufacturer, and does that affect financing for an EVO 6R system? SunEvo Solar is not currently listed among Tier 1 manufacturers according to Bloomberg NEF rankings. For residential prosumers, this typically has little practical impact - module specifications, warranty terms, and service availability matter more. For larger commercial projects or bank-financed installations, it is worth confirming the lender's requirements upfront, as some financial institutions require modules sourced exclusively from Tier 1-rated manufacturers. ### What are the dimensions of the SunEvo Solar EVO 6R 455 Wp panel, and will it fit a standard roof mounting system? The 455 Wp variant of the EVO 6R is built on a 132 half-cut cell configuration (6×22 layout) with approximate dimensions of 2382 × 1134 × 30 mm. Before ordering, confirm compatibility with your planned racking system, as the larger module format requires appropriate rail spacing. Your installer can verify whether the existing or proposed rail setup accommodates these dimensions without additional BoS components. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/evo-6r-435-455w-n-type-topcon-bifacial-double-glass-solar-mo-172cdaad0ea4.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | +45 W, lighter, +2.3 pp | | [AIKO AIKO-A490-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a490-mce54mw) | 490 W | +40 W, lighter, +2.0 pp | | [Longi Solar LR7-54HJD-500M](https://comparepv.com/panel/longi-lr7-54hjd-500m) | 500 W | +50 W, cooler, +2.0 pp | | [Talesun CIPRO-TN9C54M-500W](https://comparepv.com/panel/talesun-cipro-tn9c54m-500w) | 500 W | +50 W, cooler, +2.0 pp | | [Gokin GK-3-54HGb-500M](https://comparepv.com/panel/gokin-gk-3-54hgb-500m) | 500 W | +50 W, cooler, +2.0 pp | | [GCL GCL-NR10R/54BGDF](https://comparepv.com/panel/gcl-gcl-nr10r-54bgdf) | 500 W | +50 W, cooler, +2.0 pp | | [SunEvo Solar SE6R-48HBD-435W](https://comparepv.com/panel/sunevo-solar-se6r-48hbd-435w) | 435 W | -15 W, -0.8 pp | | [SunEvo Solar SE6R-48HBD-440W](https://comparepv.com/panel/sunevo-solar-se6r-48hbd-440w) | 440 W | -10 W, -0.5 pp | | [SunEvo Solar SE6R-48HBD-445W](https://comparepv.com/panel/sunevo-solar-se6r-48hbd-445w) | 445 W | -0.2 pp | | [SunEvo Solar SE6R-48HBD-455W](https://comparepv.com/panel/sunevo-solar-se6r-48hbd-455w) | 455 W | Very close match | | [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | +60 W, cooler, +2.5 pp | | [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | +55 W, cooler, +2.2 pp | | [WINAICO WST-505BKX54-A2](https://comparepv.com/panel/winaico-wst-505bkx54-a2) | 505 W | +55 W, cooler, +2.2 pp | --- Source: https://comparepv.com/panel/sunevo-solar-se6r-48hbd-450w Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.