--- title: "SunEvo Solar SE6-66HBD-700W Solar Panel: Specs & Datasheet | ComparePV" description: "SunEvo Solar SE6-66HBD-700W solar panel. Specs: 22.50% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/sunevo-solar-se6-66hbd-700w" image: "https://comparepv.com/og/panel/sunevo-solar-se6-66hbd-700w.png" updated: 2026-09-11 --- # SunEvo Solar SE6-66HBD-700W Strong in heat, modest efficiency 420 panels in the segment TOPCon 700-750 W ## Identity - **Manufacturer:** SunEvo Solar - **Model:** SE6-66HBD-700W - **Series:** SE6-66HBD - **Rated power:** 700 W - **Cell technology:** TOPCon - **Bifacial:** yes ## How it compares Compared against segment TOPCon 700-750 W (420 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 700 W | 715 W | Weak - bottom 7% | | | Module efficiency | 22.50% | 23.00% | Weak - bottom 5% | 4,281 | | Power density | 225.3 | 230.2 | Weak - bottom 7% | 4,048 | | Temperature coefficient | -0.280 | -0.290 | Strong - top 11% | 1,347 | | Weight (kg) | 37.9 kg | 38.0 kg | Weak - bottom 18% | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 22.50% | 23.00% | Weak - bottom 5% | 4,281 | | Power density | 225.3 | 230.2 | Weak - bottom 7% | 4,048 | | Temperature coefficient | -0.280 | -0.290 | Strong - top 11% | 1,347 | | Weight per kWp | 54.1 | 52.9 | Weak - bottom 18% | 8,436 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Strengths - **-0.280 %/°C temperature coefficient** - Top 11% of the TOPCon 700-750 W segment, against a median of -0.290. ### Watch out for - **22.50% module efficiency** - Bottom 5% of the TOPCon 700-750 W segment, against a median of 23.00%. Ranked 4,281st in the whole database. - **225.3 watts per square metre** - Bottom 7% of the TOPCon 700-750 W segment, against a median of 230.2. Ranked 4,048th in the whole database. - **54.1 kg per kWp** - Bottom 18% of the TOPCon 700-750 W segment, against a median of 52.9. - **Best for:** Commercial, utility-scale and shaded-installations. - **Not ideal for:** Tight roof space, roofs where every square metre has to count and weight-limited structures. ## Specification ### Electrical - **Rated power (Pmax):** 700 W - **Efficiency:** 22.50 % - **Voltage at Pmax (Vmp):** 40.35 V - **Current at Pmax (Imp):** 17.35 A - **Open-circuit voltage (Voc):** 48.60 V - **Short-circuit current (Isc):** 18.35 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.280 %/degC - **Temperature coefficient of Voc:** -0.240 %/degC - **Temperature coefficient of Isc:** 0.046 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** TOPCon - **Cell count:** 132 - **Bifacial:** yes ### Physical - **Length:** 2384 mm - **Width:** 1303 mm - **Thickness:** 33 mm - **Weight:** 37.9 kg - **Area:** 3.11 m2 - **Power density:** 225.3 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Output after 30 years:** 612 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 4281 of 14129 | | Power density | 4048 of 14129 | | Temperature coefficient | 1347 of 14129 | | Weight | 8436 of 14129 | | Warranty | 21 of 14129 | ## About this series The SunEvo Solar SE6-66HBD series are modules designed to maximize energy output from a single panel in installations where every square meter counts, and long-term stability is essential. The use of a **bifacial design** allows for the recovery of additional energy from both sides - particularly on light-colored roofs, on ground surfaces with gravel, or in ground-mounted systems with adequate spacing. A key advantage of this series is **dual-glass construction**, which enhances resistance to weather conditions and provides better protection for the module in demanding environments. Monocrystalline PERC technology and half-cut cell layouts support higher efficiency even under partial shading and minimize internal losses. Furthermore, multi-busbar (MBB) solutions improve current collection and enhance connection reliability. The SE6-66HBD is a good choice for PV farms, large commercial rooftops, and projects where high power density, durability, and long-term, predictable performance are desired. ## Notable figures - At 22.5% efficiency, this panel is on par with typical \*\*TOPCon 700-750W\*\* modules - Power density of 225.3 W/m² is 4.9 W/m² below \*\*TOPCon 700-750W\*\* median (230.2 W/m²) - needs more roof space - Temperature coefficient of -0.28%/°C matches the \*\*TOPCon 700-750W\*\* median - 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces - Ranked #4281 out of 14129 panels for efficiency in the database ## Questions ### What is the maximum power output of the SunEvo Solar SE6-66HBD and what does it mean for my system? The SE6-66HBD delivers a peak power of 720 Wp, placing it among the highest-output large-format modules currently on the market. This means you need only about 14 panels to build a 10 kWp system, compared to roughly 20 panels at 500 W each. Higher per-panel wattage translates to fewer roof or ground mounting points, less racking hardware, and faster installation - a significant advantage in commercial rooftop and utility-scale PV projects. ### What is TOPCon technology used in the SE6-66HBD and how does it compare to older PERC cells? TOPCon (Tunnel Oxide Passivated Contact) is a next-generation monocrystalline cell architecture. In the SE6-66HBD series it achieves approximately 22.86% module efficiency - roughly 1.5 to 2 percentage points above comparable PERC modules. TOPCon also offers a lower temperature coefficient, meaning better performance on hot days, and a lower annual degradation rate of around 0.4% versus 0.55-0.6% for PERC. The cumulative yield advantage becomes especially significant over the first decade of operation. ### What warranties come with the SunEvo Solar SE6-66HBD panels? The SE6-66HBD series carries a 12-year product warranty covering material and workmanship defects, plus a 30-year linear power output warranty. The 30-year power warranty means the manufacturer commits to maintaining output above a defined degradation threshold for three full decades. This is a standard advantage of bifacial dual-glass modules and a key factor in long-term ROI modeling for commercial and utility projects. ### How does the bifacial design of the SE6-66HBD work and when does it actually pay off? A bifacial panel harvests solar energy from both the front and rear surfaces of the module. The SE6-66HBD has a bifaciality factor of approximately 80%, which on highly reflective ground cover - gravel, white roofing membrane, snow, or light-colored concrete - can yield 4-12% more annual energy compared to a standard monofacial module. The gain is greatest in ground-mounted systems with adequate ground clearance and on bright industrial rooftops. On typical dark asphalt shingles or ceramic tiles, the rear-side contribution will be negligible. ### Is SunEvo Solar a Tier 1 manufacturer and does that matter when buying SE6-66HBD panels? SunEvo Solar does not currently appear on the Bloomberg NEF Tier 1 module manufacturer list. It is important to understand that the Tier 1 classification is a bankability rating used in project finance - it does not assess technical quality or module efficiency. In practice, some lenders on externally financed large-scale projects may require additional due diligence on non-Tier 1 suppliers. For residential and smaller commercial installations, this distinction typically has little practical impact on purchasing decisions. ### Are the SE6-66HBD panels suitable for large commercial rooftops and utility-scale PV farms? Yes, the SE6-66HBD series is designed for industrial rooftop and utility-scale ground-mount applications. The 2384 × 1303 mm format, 720 Wp output, and bifacial dual-glass construction are all characteristic of utility-grade modules. However, the panel weighs approximately 37.9 kg, which requires robust racking structures and appropriate lifting equipment during installation. This series is not intended for typical residential rooftop systems. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/evo6n-n-type-topcon-bifacial-double-glass-700-720w-solar-mou-9ef6011a0554.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [AIKO AIKO-A650-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a650-mae72mw) | 650 W | -50 W, lighter, +2.7 pp | | [AIKO AIKO-A680-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a680-mde72mw) | 680 W | Cooler, lighter, +2.7 pp | | [AIKO AIKO-A675-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a675-mde72mw) | 675 W | -25 W, lighter, +2.5 pp | | [AIKO AIKO-A700-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a700-mae78dw) | 700 W | Cooler, lighter, +2.5 pp | | [WINAICO WST-675BKX72-A2](https://comparepv.com/panel/winaico-wst-675bkx72-a2) | 675 W | -25 W, lighter, +2.5 pp | | [AIKO AIKO-A695-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a695-mae78dw) | 695 W | Cooler, lighter, +2.4 pp | | [AIKO AIKO-G670-MCH72Mw](https://comparepv.com/panel/aiko-aiko-g670-mch72mw) | 670 W | -30 W, lighter, +2.3 pp | | [Longi Solar LR7-72HVHF-670M](https://comparepv.com/panel/longi-lr7-72hvhf-670m) | 670 W | -30 W, lighter, +2.3 pp | | [SunEvo Solar SE6-66HBD-705](https://comparepv.com/panel/sunevo-solar-se6-66hbd-705) | 705 W | Very close match | | [SunEvo Solar SE6-66HBD-710](https://comparepv.com/panel/sunevo-solar-se6-66hbd-710) | 710 W | +10 W, +0.4 pp | | [SunEvo Solar SE6-66HBD-715](https://comparepv.com/panel/sunevo-solar-se6-66hbd-715) | 715 W | +15 W, +0.5 pp | | [SunEvo Solar SE6-66HBD-720](https://comparepv.com/panel/sunevo-solar-se6-66hbd-720) | 720 W | +20 W, +0.7 pp | | [AIKO AIKO-A805-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a805-grh78dw) | 805 W | +105 W, cooler, +2.6 pp | | [AIKO AIKO-A800-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a800-grh78dw) | 800 W | +100 W, cooler, +2.4 pp | | [AIKO AIKO-A795-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a795-grh78dw) | 795 W | +95 W, cooler, +2.3 pp | | [AIKO AIKO-A790-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a790-grh78dw) | 790 W | +90 W, cooler, +2.1 pp | --- Source: https://comparepv.com/panel/sunevo-solar-se6-66hbd-700w Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.